Question about NetGear WGT624 108Mbps 802.11g Wireless Firewall Router: WGT624NA (NTWLNGWGT624)

1 Answer

Restart i have a problem with my router... when i am trying to connect to the internet the router restarts by its own every 1 minute..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers
Re: Restart

Could be anything,faulty electrical supply?, try resetting to factory settings and starting from scratch and see if any change. If still no change,download the latest firmware if neccassary and try again. If all else fails, return to retailer if less than twelve months old.

Posted on Nov 24, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Everytime i try to get on the internet i get connection error 80028EA1 and when i test my connection i get the ip address but not the internet connection and then the same connection error 80028EA1 shows...

Try the following a reboot can sometime fix a lot of different problems.
2. Unplug Router/Access Points
3. Unplug Modem Wait Approximatly 2 Minutes
4. Plug in Modem wait 2 Minutes
5. Plug in Router/Access Points Wait 1 Minute
6. Restart/Reboot PC/Connected Devices.

More Information is needed for further Diagnosis! Thank You and Good Luck!!!

Jun 12, 2011 | Routers

1 Answer

Why i cant download my pictures to internet

Are you trying to downloading pictures to your computer? Try resetting your router for 5 minutes. To do this unplug the power cord from your router and leave it unplugged for 5 whole minutes. then plug in your router. Restart your computer and connect online. Try to download images then.

Mar 15, 2011 | Nokia Routers

1 Answer

Hi, my router won't le tme connect to the internet. I have unplugged it, waited a few minutes and then plugged it back in. Re-booted it, and still no connections. Any suggestions?


you probably need to unplug power on your router too.

Unplug both power plugs and wait 20 seconds. Then plug back power to your MODEM FIRST.

Wait 1 minute to make sure the connection get an ip address.

After that, put the power back to your router.

Wait 20 seconds and try the connection with your computer.

If it doesn't work, restart your computer.

Hope this helps!

Feb 21, 2011 | D-Link DIR601 WirelessN 150 Home Router...

1 Answer

There was a power outage 2 days ago. When the power came back on, the wireless portion of my DI-514 did not work. There was no internet connection to any of the pcs. How do I get it to work?

Try turning off the PC, the router, and the modem. Then restart them in this order waiting about 1 minute between each:

1) modem
2) router
3) PC

Good luck. Bry

Jan 01, 2011 | D-Link DI 514 Wireless Router (DI-514)

1 Answer

The cable modem is working but my wireless router isn't connecting to the internet.

1. Log into the router
2. On the configuration page make sure the "clone MAC address" is bulleted or checked.
3. Save settings / restart cable modem.
4. After cable modem restarts then restart the router.
5. log back into the router then go to the status page and make sure you have an outside IP address.
6. Open a browser (internet) to verify you have connectivity.

May 20, 2010 | D-Link (DI-784) Wireless Router

1 Answer

Can't connect to internet with g604t

Power down the computer.
Power off the router. Wait for 2 minutes.
Power on the router.
Reset the router. Wait 1 minute.
Restart the computer.
Try connecting again.

Dec 18, 2009 | D-Link DSL-G604T Wireless Router

1 Answer

I have a DGN2000 I use the router to connect 2 computers by ethernet cable, 1 xbox by ethernet cable and 2 wireless laptops. Anytime ANYONE tries to restart their computer to access the internet we have...

Try upgrading the router's firmware to the newest version - check out version 1.3.10NA at this link - there are numerous fixes, but DHCP is specifically highlighted. Good luck!!

Oct 20, 2009 | NetGear DGN2000-100NAS Router

1 Answer

I try to connect to internet but i can't i have cablevision service

Are you trying to do it wirelessly?

If so try doing the following things in order

unplug your modem and router

Plug in your modem first. wait 1 minute then plug in your router. restart your computer then try to connect again.

Sep 27, 2009 | D-Link AirPlus Xtreme G DI-624 Wireless...

3 Answers

Trying to connect an old WRT54GLWireless-G to new computer&laptop

what i would do is go to the back of the router and find the pin hole that says reset push that in with a small item and hold it down for 30-35 secs and release dont unplug the router just let it sit till all the lights come back on now it should be back to factory settings now i asume you are runing wireless if so the ssid would be linksys you can go and change all of the settings by opening an internet browser and going to  the username is admin and the password is eather going to be admin or password  after doing this make sure your eathernet cable from your cable or dsl modem is pluged into the port on the back of the router labeled internet and if you are runing any of the computers on eathernet and not wireless make sure there pluged into 1-4 that should fix your problem

Mar 27, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Intermittent or slow internet connection

Go here and upgrade your Router's Firmware - you will need to choose your location on the site at top left hand corner of the screen

Feb 27, 2009 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Routers Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts


Level 1 Expert

31 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers


Level 1 Expert

36 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides