Question about Toshiba CT-90157 Remote Control

Open Question

NEED TO REPROGRAM TOSHIBA REMOTE DC-FL20S after batteries went dead

Posted by on

4 Suggested Answers

trintek
  • 111 Answers

SOURCE: i have an emerson tv and a GE universal remote

as this was posted to the rca rcu300 remote location and not in a ge section, i am undure of what model your remote is. that being said, you can find a list of all codes the ge remotes support and how to program them by clicking here.

i hope this helps, if not, please post the model of the remote control, and the emerson dvd/tv combo.

hope this helps,
trin

Posted on Nov 16, 2007

  • 520 Answers

SOURCE: how do I reprogram my remote

Here's the link to download the manual.
http://66.77.167.109/rcaaccessories/RcaaccessoriesInfo.do?findManual=RCR311W

Posted on Nov 06, 2008

  • 1 Answer

SOURCE: I can't program my Toshiba TV to the CT 91507 remote

change battrries and select our old remote control codes

Posted on Jan 19, 2009

carlsbiz
  • 1124 Answers

SOURCE: I need a code for an RCA Television to reprogram my remote contro

Here you go...

000,006,011,019,027,034,038,044,046,088

Note;
Thank you for posting your question on FixYa.com
We are helping people on a points system.
If the information provided here was at all helpful,
please be kind - rate well and close the post.
Thank you – and enjoy your day ;o)

Posted on Jul 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

If my battery went dead on my remote do I have to reprogram remote when I put in new battery?


You should not have to reprogram the remote. The programming is stored in Non-volatile ram.

Dec 24, 2014 | Remote Controls

1 Answer

I just bought a new remote and cannot find the user guide for the TV. Do you need to program the remote for it to work?


Hello
You have to programme it. do the following:
[1] Make sure there are working batteries in the Toshiba remote control.
[2] Turn on your television set, DVD player or other device that you want to control with the Toshiba remote

[3] Find the "Recall" or "Setup" button on the Toshiba remote control. After you find it, press and hold down that button until the lights on the remote control turn on and remain lit.

[4] Point the Toshiba remote at the device you turned on in Step 2 and press the button on the remote for that device.

[5] Begin pressing the "Power" button on the Toshiba remote. Continue doing this until you have turned the device off using the Toshiba remote. Once it shuts off, press "Enter" on the Toshiba remote. The remote will then be programmed.

OK.


Jul 19, 2011 | Toshiba DC-SB1 Remote Control

2 Answers

I have a Vermont Casting (Honeywell) remote with 6 buttons. Ireplaced the batteries from the summer and it does not function. the Room Temp shows, the off signal shows and when you press the on button...


Hi,

It's unlikely that you need a new remote. It simply needs to be reprogrammed with the correct code again. Remotes can "forget" the programmed codes if the batteries run down completely or if the new batteries aren't inserted quickly enough.

Reprogram the codes and it should work.

Please post back if you need further assistance.

Regards,
BElectric

Dec 07, 2010 | Honeywell Remote Controls

1 Answer

My phillips universal CL035A was working fine until the batteries went dead and now with new batts we cant get it to work how do we reprogram it


It lost the code when the battery power went out. Not uncommon. The best thing to do is to look up your remote's model number on Philip's website: http://www.search.philips.com/search/search?q=universla+remote&s=all&l=us_en&h=all

1. Find your remote model and click on it.
2. Click "Support" at the very top of the page.
3. On the left hand side of the page, click for the "user manual" (so you know how to enter the code) and then "remote control code finder" and it will be able to help you from there.


Aug 20, 2009 | Philips Magnavox Learning Universal Remote

1 Answer

I can't program my Toshiba TV to the CT 91507 remote


change battrries and select our old remote control codes

Jan 19, 2009 | Toshiba CT-90157 Remote Control

1 Answer

I have an emerson tv and a GE universal remote


as this was posted to the rca rcu300 remote location and not in a ge section, i am undure of what model your remote is. that being said, you can find a list of all codes the ge remotes support and how to program them by clicking here.

i hope this helps, if not, please post the model of the remote control, and the emerson dvd/tv combo.

hope this helps,
trin

Nov 16, 2007 | RCA RCU300 Remote Control

Not finding what you are looking for?
Toshiba CT-90157 Remote Control Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

andy williard
andy williard

Level 2 Expert

226 Answers

Are you a Toshiba Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...