Question about Camera Accessories

1 Answer

Release Platform I have a Vivitar VPT-120 Tripod and a Kodak EasyShare Z712IS camera. I need a Release Platform for the Tripod that is compatible with my camera. Thanks! Ree3

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thank you, but I have chosen to not use your services and go directly to the tripod maker.

Posted on Nov 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a quick release plate for smith victor pinnacle p920


Have you tried Ebay or Amazon - or even your local camera store, they may have one second hand ?

Mar 04, 2016 | Smith Victor Quick Release Plate for the...

1 Answer

I need instruction manual for manfrotto 058b tripod


There is a red slider under the main casting that will release the legs all together.

Apr 13, 2013 | Manfrotto 058b Triatt Camera Tripod Black

1 Answer

My kodac wont format the sd card. it does this over and over.it says format but wont format


What model Kodak camera? Are you sure you have an SD card, 2GB or smaller? Many Kodak models won't work with higher-capacity SDHC cards.

Jan 15, 2013 | Kodak Easyshare CX7530, CX7430, CX7330,...

1 Answer

I dropped camera and screen is shattered


FixYa does not repair cameras or any other gear.

Nov 12, 2011 | Kodak SLICE Touchscreen 14MP Digital...

1 Answer

I cannot figure out how to get the plate off the head. I end up either putting camera on, then twisting the whole thing onto the tripod, or putting the head on the tripod and twisting the camera around to...


Sounds as if you haven't unlocked the quick disconnect plate from the 222 head.

Release the quick disconnect plate from the 222 pistol grip with the thumb release it will click open and pop the release plate up a bit to remove it. The affix this plate to the camera tripod socket 1/4 x20 female thread on the camera bottom. The underside of the quick release plate has a "D" ring to screw it to the camera, fold over the "D" ring and when you pit it back on the 222 set the edge under the lip and set it down the brass pin then will snap the thumb release over and lock into place.

See my diagrams
tri3mast_222.jpg
And the release plate
tri3mast_223.jpg

Jan 22, 2011 | Manfrotto 222 GripAction Ball Joystick...

1 Answer

I need a quick release plate for a Solidex tripod VT-88HQ


I do not know of anybody that sells or supports that brand of tripod.

Sep 30, 2009 | Camera Accessories

1 Answer

Kodak EasyShare


Hello,

All paper that will fit your paper tray will work. However, it is questionable that all ink will. Each cartridge has a unique chip inside that instructs the printer what the fluid level is and if its been refilled. To keep one cartridge design from being used in the wrong printer there is usually a design in the shape so that it will either not fit or not lock in place.

You can use any Kodak paper, yes. You cannot use any cartridge, no.

Best,
Worldvet

Jan 05, 2009 | Kodak Camera Accessories

Not finding what you are looking for?
Camera Accessories Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Camera Accessories Experts

kakima

Level 3 Expert

96467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68229 Answers

Are you a Camera Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...