Question about Whirlpool Ultimate Care II LSQ9564J Top Load Washer

1 Answer

"OB" Code error

I have the same problem as wendlsto, posted Nov 12, 2009, with the Calypso stopping in the middle of the cycle and displaying "ob" code.
Maybe Calypso's like to be "On Brake" in the month of November. ha, ha, ha.
I do really need help with this issue as well.
Thanks,

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The OB indicates and out of balance condition has been detected by the motor control. You say this happens when the washer is empty also. One thing about the OB error is that the lid must be opened to clear the error and allow the washer to advance to the next part of the cycle. If the lid is not opened to adjust the clothes then the OB error will happen again.

If the OB error was cleared and the OB occurs with an empty load then the motor control has failed.

The drain pump must work. The image below shows how to run a diagnostic test to check the drain pump. Follow the instructions in the image below and check the drain pump operation. If the pump runs and the water does not drain then the sump is clogged. If the pump hums but does not run then the pump needs to be replaced.

http://media.fotki.com/1_p,wkktswgwqtqrbwfxgtqsskgwtqkq,vi/gftrgbbtfxfffgqskfk/1/1303472/5961857/image48348img-or.jpg

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer keeps shuting off in the spin cycle and the code ob shows up.


Hi


Thanks for using FixYa. Error ob indicates off balance, if the motor controller detects an unrecoverable off-balance condition, the machine controller will shut down and display an “ob” for off balance. The lid switch must be opened at least once before restarting the cycle, if this condition occurs. Opening the lid will allow the customer to view and redistribute the load. Press STOP/CANCEL to clear the display. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Aug 23, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Calypso Washer stopped working


The OB indicates and out of balance condition has been detected by the motor control. You say this happens when the washer is empty also. One thing about the OB error is that the lid must be opened to clear the error and allow the washer to advance to the next part of the cycle. If the lid is not opened to adjust the clothes then the OB error will happen again.

If the OB error was cleared and the OB occurs with an empty load then the motor control has failed.

The drain pump must work. The image below shows how to run a diagnostic test to check the drain pump. Follow the instructions in the image below and check the drain pump operation. If the pump runs and the water does not drain then the sump is clogged. If the pump hums but does not run then the pump needs to be replaced.

http://media.fotki.com/1_p,wkktswgwqtqrbwfxgtqsskgwtqkq,vi/gftrgbbtfxfffgqskfk/1/1303472/5961857/image48348img-or.jpg

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question*@#$&

Jul 18, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

What does a code o6 mean on a Whirlpool Calypso top load washing machine.


is this the code your refering to
ob" Off Balance If the motor controller detects an unrecoverable off-balance condition, the machine controller will shut down and display an "ob" for Off Balance
The lid switch must be opened at least once before restarting the cycle, if this condition occurs. Opening the lid will allow the customer to view and redistribute the load.

Press STOP/CANCEL to clear the display
cuz they list no code 06 hope this helps

Jul 18, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Error code on calyspo washer will not run on any cycle stops and beeps with error code either ob/ld both codes are coming up.


The OB indicates and out of balance condition has been detected by the motor control.
One thing about the OB error is that the lid must be opened to clear the error and allow the washer to advance to the next part of the cycle. If the lid is not opened to adjust the clothes then the OB error will happen again.

If the OB error was cleared and the OB occurs with an empty load then the motor control has failed.

The drain pump must work. The image below shows how to run a diagnostic test to check the drain pump. Follow the instructions in the image below and check the drain pump operation. If the pump runs and the water does not drain then the sump is clogged. If the pump hums but does not run then the pump needs to be replaced.

http://media.fotki.com/1_p,wkktswgwqtqrbwfxgtqsskgwtqkq,vi/gftrgbbtfxfffgqskfk/1/1303472/5961857/image48348img-or.jpg

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jun 30, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

What does error code ob mean on a Whirlpool Calypso washer? The washer stops in mid cycle with the error code ob. I restart it and after a few minutes it shows the same error code again.


The OB indicates and out of balance condition has been detected by the motor control. You say this happens when the washer is empty also. One thing about the OB error is that the lid must be opened to clear the error and allow the washer to advance to the next part of the cycle. If the lid is not opened to adjust the clothes then the OB error will happen again.

If the OB error was cleared and the OB occurs with an empty load then the motor control has failed.

The drain pump must work. The image below shows how to run a diagnostic test to check the drain pump. Follow the instructions in the image below and check the drain pump operation. If the pump runs and the water does not drain then the sump is clogged. If the pump hums but does not run then the pump needs to be replaced.

http://media.fotki.com/1_p,wkktswgwqtqrbwfxgtqsskgwtqkq,vi/gftrgbbtfxfffgqskfk/1/1303472/5961857/image48348img-or.jpg

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question*@^%

May 29, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

I have an error message that reads ob. I have an


OB MEANS OFF BALANCE if the motor controller detects an unrecoverable off-blance condition, the machine controller will shut down and display ob. the lid switch must be opened at least once before restarting the cycle if this condition occurs. opening the lid will allow you to view and redistribute the load. press stop/cancel to clear the display. hope this helps.

Oct 27, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Whirlpool Calypso stops at 26 minutes and throws ob code


The OB indicates and out of balance condition has been detected by the motor control. You say this happens when the washer is empty also. One thing about the OB error is that the lid must be opened to clear the error and allow the washer to advance to the next part of the cycle. If the lid is not opened to adjust the clothes then the OB error will happen again.

If the OB error was cleared and the OB occurs with an empty load then the motor control has failed.

The drain pump must work. The image below shows how to run a diagnostic test to check the drain pump. Follow the instructions in the image below and check the drain pump operation. If the pump runs and the water does not drain then the sump is clogged. If the pump hums but does not run then the pump needs to be replaced.

http://media.fotki.com/1_p,wkktswgwqtqrbwfxgtqsskgwtqkq,vi/gftrgbbtfxfffgqskfk/1/1303472/5961857/image48348img-or.jpg

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 29, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Machine stops during spin cycle and reads 'ob' on the display


Read this thread about your error. I am sure it relates to your (drain) problem.

Good luck and if you have any more questions, just come back here and leave a comment - I'm happy to help.

May 21, 2009 | Kenmore Washing Machines

1 Answer

Calypso washer machine


Off Balance. From the service manual (you can google error codes for these machines), if the motor controller detects an unrecoverable off-balance condition, the machine controller will shut down and display an "ob" for off balance. The lid switch must be opened at least once before restarting the cycle, if this condition occurs. Opening the lid will allow you to view and redistribute the load. Press STOP/CANCEL to clear the display.

Feb 27, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Whirlpool Calypso ''ob'' problem


ob Off Balance If the motor controller detects an unrecoverable off-balance condition, the machine controller will shut down and display an ob for Off Balance The lid switch must be opened at least once before restarting the cycle, if this condition occurs. Opening the lid will allow the customer to view and redistribute the load.
if this does not fix the issue it is most likely the strut and shock system that is falty on the machine. you could replace them yourself but they are fairly expensive

Nov 12, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...