Question about Vtech 5.8GHz Cordless Phone with Digital Answering System

Open Question

Vtech i6725 handset will not register

I have Vtech i6725 phone. The phones were functioning fine. Recently one handset will not work. It reads "NOT REGISTERED" in the handset display. We tried unplugging bases and replugging that did not work. When the unregistered handset is placed in the base, the display reads "FIND HNDSET FOR 4 SEC." We tried pressing the find handset button but that does not work, the handset goes back to displaying "not registered" Anyone know how to get the handset registered?

Posted by on

5 Suggested Answers

  • 2 Answers

SOURCE: Not Registered

I had the same problem and this procedure fixes it! First, unplug the power to the main base (answering machine) for 20 seconds. Plus it back in. Put the phone that says "not registered" in the main answering machine. It will say "press the find handset for 4 seconds". Do that. It will run thru a series of stuff and will find the handset. It works! Rich (jambones.com)

Posted on Jun 01, 2007

horthette
  • 23 Answers

SOURCE: 2355 at&t phone

you will need to call att or manage your phone online at http://www.att.com/gen/landing-pages?pid=3308

Posted on Jul 11, 2007

SOURCE: phones cant find base

tried the same - battery solution.. my phone is 1.2 years old. DO NOT BUY A VTECH PHONE - they look nice, but they are JUNK! And the speakerphone sucks.

Posted on Oct 02, 2008

  • 1 Answer

SOURCE: How do you unregister a defective handset so that it can replaced

1. Delete or listen to all voice mail messages, if necessary, to clear the IN USE/Voice Mail light indicator.
Note: Skip this step if it does not apply to your MD Series cordless telephone model.
2. Press OFF on the base station and each handset.
3. Press and hold down PAGE on the base station until the IN USE light flashes slowly, then release.
4. Press and hold down PAGE again until the IN USE light begins to flash quickly, then release PAGE.
5. Quickly and fully press and release PAGE again.
6. Please register handset displays. Press OK to begin the registration process, or press EXIT.

Posted on Mar 12, 2009

  • 1 Answer

SOURCE: VT2461 ADDITIONAL HANDSET PROBLEM

I can vouch for the second solution. It worked perfectly on my 2461 with two extensions. Even the vTech website was not able to provide a solution.


Posted on May 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I register my vetch cordless phone?


General - Product Troubleshooting - VTech® Cordless Phones

www.vtechphones.com/support/.../35/178

VTech Communications Inc.Step 1: Place the handset in the base or charger. If PRESS FIND HS 4 SEC ON BASE does not appear on the screen after a few seconds, lift up handset and recradle it in the base or charger. Step 2: On the telephone base, press and hold FIND HANDSET for approximately four seconds.

Product Registration - VTech® Cordless Phones

https://www.vtechphones.com/.../product-re...

VTech Communications Inc.Vtech DECT 6.0 cordless phones are among the most advanced and innovative homephones on the ... Product Registration. How do I register my product?

vtech cordless handset, how to register - YouTube

? 3:21
https://www.youtube.com/watch?v=dV9rZ_cYcks
Feb 22, 2015 - Uploaded by Brian Williams
i registered my handset but im not able to call and answer call from my ... you lose your phone you have to de register allphones and start over.

Jan 21, 2016 | VTech Communications CS6114 - cordless...

1 Answer

HOW DO I RESET THE NOT REGISTERED ON MY DECT 6.0?


Register the handset to the base again. Since you didn't specify the model of your VTech DECT 6.0 phone I can't give you exact instructions on how to do this. Please enter the model of your phone into the search box here to download a copy of the manual.

Jan 31, 2013 | Vtech DECT 6.0 Digital Cordless Phone

4 Answers

My vtech phone says not registered and not sure why and how come? can this be fixed or do i have to buy new one? model # CS6114 S# LR605935851


Here is a direct link to the User's Manual for your phone:

http://vt.vtp-media.com/ecp/documents/product_Product/1624/UserManual/5352/cs6114_manual_i6.pdf


To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.

See page 26 of the manual for detailed instructions on HOW TO REGISTER THE HANDSET TO THE BASE.

Basically, the manual reads as follows:

Not registered appears on the handset and it does not work at all.

The handset may be deregistered from the telephone base.
Follow the steps below to register the handset to the telephone base.

1. Remove the handset from the telephone base.

2. Press and hold FIND HANDSET button on the telephone base for about four seconds until the red IN USE light turns on.

3. Then press # (pound key) on the handset.

It displays Registering... and it takes about 60 seconds to complete the registration.
The handset displays Registered for a few seconds and you hear a confirmation tone when the registration process completes.


I hope that was helpful to you, good luck and take care.

Joe.

Aug 13, 2011 | Vtech 2653 Cordless Phone (VTECHEV2653)

1 Answer

Problems with C110 & A110 Vtech Mirage Dect Home phones


Have strangely got the same problem - about the same time you posted this, but intermitently. I have isolated that the problem is in fact the handset itself, not the base unit. I eliminated a problem with the base unit by a) registering a different DECT phone to it. - The base still works fine. b) Leaving the handset switched off for an hour or so (press and hold the "OK" botton to switch off / on); then whislt it was working, registering the handset to a different base (Base 2). And guess what, after 30 mins the "BASE 2" message started flashing on the faulty handset.
So, if you already have an A110 extension handset, make sure it's also registered to base 1 and maybe try to get just the handset repaired via VTECH. (or just buy a new handset if they are available).

Jun 21, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

2 Answers

No connection


deregister headsets and then run register again

Jun 09, 2008 | Vtech 5.8 Ghz Handset Cordless Phone...

1 Answer

My vtech 5825 screen says NOT REGISTERED and does not work


Place the handset in the charger and press find handset for 4 seconds.This will register the handset. do the same for other handsets.

May 16, 2008 | Vtech IA 5845 Dual Handset Cordless Phone...

1 Answer

Vtech M6896 phones do not work


Step 1: Press and hold FIND HANDSET on the main telephone base for 10 seconds.

Step 2: When the IN USE light starts to flash, release the FIND HANDSET button.

Step 3: Press and release FIND HANDSET again. The IN USE light will turn off and in a few seconds, all handsets will be de-registered.

Step 4: All handsets will show NOT REGISTERED.

To register a handset (register 1 handset at a time):
Step 1: Place the handset in the base unit or a charger that is connected to a power outlet. If PRESS FIND HNDST 4 SEC ON BASE does not appear on the screen after a few seconds, lift up handset and place in base or charger again.

Step 2: On the telephone base, press and hold FIND HANDSET for four seconds. Release FIND HANDSET once the IN USE light comes on.

After a while the handset will emit a series of tones, the newly registered handset will be assigned the lowest extension number not previously assigned to another system handset (1-4) when successfully registered. Repeat Steps 1 and 2 if the handset does not successfully register to the telephone base within two minutes.

Jan 18, 2008 | Vtech mi6896 Trio Cordless Phone

1 Answer

VT2461 ADDITIONAL HANDSET PROBLEM


I can vouch for the second solution. It worked perfectly on my 2461 with two extensions. Even the vTech website was not able to provide a solution.


Dec 12, 2007 | Vtech VT 2461 Cordless Phone

4 Answers

VT 2461 Won't let me register new handset


jimmackey

were you ever able to register the additional handset? I have the same problem with 4 handsets, one broke and I bought 2 new vt2420 handsets. The unit wont register handset #3 (the one that broke). Would love to know if you were able to resolve the issue?

Oct 11, 2007 | Vtech VT 2461 Cordless Phone

2 Answers

Voice mail i6725 vtech phone


ACCORDING TO THE MODEL NUMBER THIS PHONE DOES NOT HAVE AN ANSWERING DEVICE. IF YOU HAVE VOICEMAIL - YOU MUST HAVE THE PHONE COMPANY'S SERVICE FOR VOICE MAIL. IF YOU HAVE A STUTTERED DIALTONE WHEN YOU HAVE MESSAGES THEN IT PROBABLY COMES FROM YOUR TELEPHONE COMPANY. CALL THE PHONE COMPANY AND ASK FOR INSTRUCTIONS TO CHANGE THE GREETING ON VOICEMAIL.

Jan 14, 2007 | Vtech ia5845 Twin Cordless Phone

Not finding what you are looking for?
Vtech 5.8GHz Cordless Phone with Digital Answering System Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vtech Lands Phones Experts

kakima

Level 3 Expert

98829 Answers

Cindy Wells

Level 3 Expert

4807 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Vtech Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...