Question about Multimedia Projectors
Hi Guys,I have just found your fantastic site.I am really in need ofsome words of wisdom. I recently retubed my Barco Data 701 CRT Projector with a brand new greentube.I have done the retubing before on other sets and all has beenfine.I ran the Barco tube run in cycle for 2 evenings and on the thirdevening I fired her up and within 15 min the green tube was locked on avery high output! the flyback lines were showing it was that bright.Allother functions fine.no smoke or smell.Tried turning off and on.The runin cycle is not accessible now and the most important clue is that onthe control board the "CYCLE" light is flashing rapidly.None of thefront fault lights are lit however.Please help I have the same problem. I worked on the green tube and now I have a very high green output with horizontal lines accross the screen. No TV imput. Flashing red light on on the the boards inside the projector. Help.
Sounds like a damaged board. If red light is flashing every after 1 second, chances are this is a fatal error.
Hope this helps
Posted on Nov 15, 2008
Tips for a great answer:
Aug 15, 2011 | Barco IQ G210L Multimedia Projector
Feb 15, 2011 | Barco SLM G5 DLP Projector
Aug 10, 2010 | Barco RLM R6+ Multimedia Projector
Aug 05, 2010 | Barco RLM G5 PERFORMER (NO LENS) R90-10021...
May 20, 2008 | Barco Multimedia Projectors
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: