Question about D-Link AirSpot DSA-3200 (F56772) Firewall

1 Answer

After resetting the Access Point i cannot login to admin account

Access Point : DWL-3200AP, Dlink

After reseting my access point i am getting the AP ip 192.168.21.3 but it should be 192.168.0.50 and also i cannot login to my admin account.
Please help me. I have just purchase.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

You need to reset the AP to factory default (keep the reset button pressed while powering up the unit).

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't access dlink 192.168.0.1


if you goto start button, type in cmd (press enter)
will load black screen with white writing,
type in ipconfig /all
look for the bit of info that says default gateway and next to it should have a ip address. like 192.168.0.1
if its shows a number like that, then thats the number u need to type in in internet explorer to access the router,
if theres no number next to it, and you have tried a hard reset then router is faulty. hope this helps.

Jun 02, 2012 | D-Link DIR-655 Extreme-N Gigabit Wireless...

1 Answer

Does a 10 second reset on a Netgear router reset everything. Even the password on the network and so on?


it should only set the password on the router

Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

or

if there a small hole in the front or back of the router push a hair pin in to reset to factory settings

hope this helps

Jan 02, 2011 | NetGear ProSafe FVG318 (606449041668)...

1 Answer

I've forgotten the username and password for my router. The router I have is the DSA-3200. Airport wireless G public/private gateway. Is there any way I can reset the password to default


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Dec 29, 2010 | D-Link AirSpot DSA-3200 (F56772) Firewall

1 Answer

I am a admin at a new company and they do not know nor can they find the Admin login and password. Is there a way to hack in to the SonicWALL PRO 230 Firewall unit?


Deafault user: admin
password: password

default ip: 192.168.168.168

if in case you cannot get in, you need to reset the device to its factory default.


thanks

eric

Oct 29, 2010 | SonicWALL PRO 230 Firewall

1 Answer

I changed a setting in the admin panel disabling access via HTTP this morning thinking that I would still be able to access the admin panel from the HTTPS setting but now I can't get to any part of the...


look in network comuters an devices for it or try router.com from internet explorer or use pen in hole to reset to default, push button and hold in, unplug router while holding the wole time then plug back in until all lights flash wait a coulple more seconds then release buttom, alow to power up then unplug for 10 seconds and plug back in.

Nov 13, 2009 | SonicWALL TZ 170 SP Firewall

4 Answers

How do i unblock netgear firewall?


Sir to access the router, go to your browser then type in 192.168.1.1 then type in Under the Username field enter “admin” and Under the password field enter “password”. After this you are now in it and you can now configure the firewall to be in unblock mode. Before doing this sir, i suggest that you unplug any cable in the WAN slot and just leave the PC you are using to it.

Jul 19, 2009 | NetGear ProSafe FVG318 (606449041668)...

2 Answers

I need to reset the password


reset the router to default settings by pressing on the reset button for ten seconds. (usually located at the back of the unit)

May 12, 2009 | D-Link DFL 500 (DFL-500) Firewall

1 Answer

Unable to access admin panel on Hotbrick firewall


Are you able to reach the IP address from you machine if not check the reachability from your machine to the firewall. You shall do this by simple ping.

Mar 31, 2009 | Network Security & Firewall Devices

1 Answer

I want to set factury default to my fair wall dlink dfl 210


With the unit on, locate the small reset switch on the back of the router. Insert the end of a paperclip into the reset switch and hold for 10 seconds. The router will restart itself and the WLAN light will stop blinking.  The router is now reset to factory defaults. 

Remember The factory defaults username is admin, and there is no password.

Feb 09, 2009 | D-Link Netdefend DFL-210 (DFL210)...

1 Answer

How to reset admin password servgate edgeforce m30/40


I am not sure of the models but on the rack mount Edgeforce product your suppose to hold the reset pin while powering up until the Alarm light turns on, take 2-3 mins. Default user/password is admin/admin.

Fair warning I have one that is locked right now as well and a reset is not resetting and I can no longer log into it either. Anyone with ideas?

Dec 14, 2007 | ServGate Technologies ServGate SG200...

Not finding what you are looking for?
D-Link AirSpot DSA-3200 (F56772) Firewall Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Network Security & Firewall Devices Experts

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

john smith

Level 2 Expert

366 Answers

rjivaro

Level 2 Expert

152 Answers

Are you a D-Link Network Security and Firewall Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...