Question about Televison & Video

1 Answer

Sharp aquos LC-20S5U will not power on. red light in front is on when power is turned on red light goes off and nothing happens.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

The power board has failed and while possible to replace, is pretty expensive if the unit isn't under warranty. You can't get the part or schematics directly from Sharp unless your factory service. Tritronics might have it, but you'd have to check with them as to availability and price - and you'll pay retail. Secondly, I've seen malfunctioning supplies damage the control board. If you find the inverter supplies are damaged on the panel, go shopping.

Only thing I can offer in terms of repair is check the main filter caps on the secondaries of the inverter supply. If I remember correctly, they're 2200uF @ 25V and 1200uF @ 35V. They'd be "pregnant" or out of tolerance. You have to pull all of them and check with a meter to confirm.

DO NOT USE STANDARD CAPS. You MUST use caps rated for high heat (105 degrees C) and high ESR. They're designed to handle the frequency used for the supply and don't drift as the set plays. MCM offers these caps in their components section.

Good luck,
Mark

Posted on Nov 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Sharp Aquos LC-30hv4u


this looks like a power problem sir.

do you use a surge protector?

Jul 14, 2008 | Televison & Video

1 Answer

Look my problem is that i have a sharp 56dr650 i replaced the lam p and it worked for 3 days then i turned it back on and nothing happems. No backlight not sound no nothing. The power light comes on...


within the 3 days of replacing your lamp to when it stopped working, did you open the access panel for the lamp again? If you did, the interlock switch might not have engaged when you put the panel back on. Make sure the switch is in the O position, then try powering it up.

Nov 05, 2010 | Sharp 56DR650 56" Rear Projection HDTV

1 Answer

I WANT TO KNOW HOW TO CONNECT MY PANASONIC MODEL SC-HT830V HOME THEATER SOUND SYSTEM TO A SHARP AQUOS MODEL LC-37D62U TELEVISION I NEED A WIRING DIAGRAM


U do not need a diagram-simply hook up red/white wires from audio output of sharp tv to audio input(tv) of panasonic unit.any questions contact us- djstvrepair@comcast.net

Sep 10, 2009 | Televison & Video

3 Answers

I have a Sharp 56DR650, red power light turns off.


Engine block(color wheel) needs replacing approx $650 total

Aug 09, 2009 | Sharp 56DR650 56" Rear Projection HDTV

1 Answer

Where do I buy Sharp Aquos parts. I am after power supply board. CA009WJN1 for Model LC-30HV4M Thanks


Good Day, coopsl;ine;
Try calling (630)-226-2699; SHARP, or go to NATIONAL PARTS CENTER: parts@sharpsec.com. Good luck, big IRISH.

Sep 09, 2008 | Sharp Televison & Video

1 Answer

TV will not turn on model aquos LC-46X20 Went away for a long weekend, did not turn power off left TV on stand by. Came back and power LED on front of TV is flashing and will not show any form of piture...


hello. here is something you can try , unplug the set and let it set. for about 10 mins. then plug it back and try tpo turn it on. hope this help's you. let me know "GOOD LUCK"

Jul 27, 2008 | Sharp Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69745 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...