Question about Kenmore 63942 Dryer

2 Answers

Kenmore gas dryer not getting hot

I have a #97586200 75862 Kemore gas dryer, i have taken back off but I don't know what I'm looking at . Please help!!!!

Posted by on

  • mcampeau Nov 17, 2008

    I have a sears kenmore electric dryer that will not get hot, model #110.96320100.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Make sure your getting 240 volts at the outside legs on your plug and 120 at the middle legs if not you got a bad circuit breaker or plug wire.if yoy have the voltage call your local appliance deal 4 service

Posted on Dec 16, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

Check the duct (vent) first - it maybe clogged up

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Converted a kemore from gas to propane now it doesnt get very hot and takes forever to dry


Normally natural gas appliances have a different nozzle size than the propane units. i would check with your propane/gas dealer to make sure.

Mar 02, 2014 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

Kemore 80 series gas dryer runs but no heat. I have seen 3 differnt solutions, how do I know which one to do? The gas valve solenoid, the thermal fuse or the ignitor????


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101

Aug 18, 2011 | Kenmore 72802 Gas Dryer

1 Answer

Dryer does not heat


Hello,
Check out this tip it will help you with your problem...

http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

Heatman101

Mar 23, 2010 | Kenmore 72972 Gas Dryer

1 Answer

I replced ingnitor in my kemore gas dryer but not flame


Hello Friend, If the igniter is glowing continally and not clicking off, then your therm-disc is definately bad. It's attached to the burner shroud right across from the igniter. It reads the heat off the igniter through a little rectangular hole in the shroud. Replace and problem should be solved.

If igniter is glowing and then cools down and then begins to glow again in a repeating manner then I would say that the thermo-disc is good and you need to replace the gas valve coils. coils are easy to change, they are located on top of gas valve, two screws hold them in place. An easy fix.

Happy to help, Tim.

Jun 30, 2009 | Kenmore 75944 Gas Dryer

2 Answers

My kemore dryer model 11071812001 not drying clothes


Sounds like the problem is the solenoid coils on your gas valve. easy to replace and inexpensive + common. their are 2 coils on the valve that have 2 wires each going to them. Let me know if you have any other questions,
Phil

Jun 10, 2009 | Kenmore 73952 Gas Dryer

1 Answer

Not staying hot-Kemore 80 Series gas


suspect coils bad on burner valve after heating up first time will sometimes fail on following fire ups

Nov 19, 2008 | Kenmore 63942 Dryer

1 Answer

KENMORE gas dryer


Hi .No The Solenoids Are Turning The Gas On . I would Check The Venting . Remove The Venting Clean All Venting. Thanks The Appliance Doc

Oct 03, 2008 | Kenmore 73952 Gas Dryer

Not finding what you are looking for?
Kenmore 63942 Dryer Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...