Can i date stamp - Fuji Finepix A820 8.3 Mp 4x Optical Zoom Digital Camera Fujifilm A 820 203585

Are you sure? Where are you seeing the date? As far as I'm aware, the M530 can't stamp the date on the pics. It can show the date when reviewing pics, and just about any photo printing program can print the date along with the photo, but the camera won't hide anything behind the date.

1. Press the Menu button.
2. If your camera displays a menu with tabs at the top:
a) Press the Right/Left buttons to highlight the Setup tab.
b) Press the Down button to highlight Date Stamp.
c) Press the OK button to add the date stamp to new pictures.
3. If your camera does not display a tabbed menu:
a) Press the Down button to highlight Date Stamp. NOTE: Depending on your model, Date Stamp might be within the Setup choice.
b) Press the OK button to add the Date Stamp to new pictures.

1. Press the Menu button.
2. If your camera displays a menu with tabs at the top:
a) Press the Right/Left buttons to highlight the Setup tab.
b) Press the Down button to highlight Date Stamp.
c) Press the OK button to add the date stamp to new pictures.
3. If your camera does not display a tabbed menu:
a) Press the Down button to highlight Date Stamp. NOTE: Depending on your model, Date Stamp might be within the Setup choice.
b) Press the OK button to add the Date Stamp to new pictures.

Press Menu, scroll down to "Date stamp" and across to select off, date or date and time, then press menu again. The date stamp only works in Postcard mode, so if you set a different picture resolution, that will also stop the pictures being date stamped.

Follow these steps:

1. Press the Menu button.
2. Select the Setup menu.
3. Select the Date/Time Stamp feature.
4. Turn off the Date/Time Stamp feature.
5. Press the OK button.

If you find my solution helpful, you're kindly requested to rate it. Thanks!

Hi,
To set date stamp follow the instruction:-
1) Press MENU button. 2) Select REC Menu. 3) Use the up and down buttons to Select Date Stamp. 4) Toggle to the desired opetion OFF or ON.
Note:- Ensure the date & time is set before using date stamp function.

Good Luck

In order to imprint the date stamp on photos, the photo size (L, M1, M2, M3, S, Postcard) must be set to Postcard, and in the recording menu the "Date Stamp" option must be set to Date or Date & Time.

The date stamp only works in "Postcard" resolution. Press the Func Set button, then scroll down to the bottom to select postcard resolution.
Then press the menu button. The date time stamp selection should now work. Simply turn it on.

Date stamp is only possible when you set the resolution (picture size) at "Postcard 1600x1200" option, if the date stamp is set to "Date & Time" or "Date" option

The date stamping option is only available when shooting in postcard mode.