Question about NetGear DG834G Router

2 Answers

Netgear DG843 not connecting to internet

I have installed the modem/router. The internet and dsl lights are green, showing connection. When trying to go to anywebsite on IE, it comes up with error like when one is not connected to internet.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,913 Answers

Access your router with following link

http://192.168.0.1

then type user name:admin
password is:admin or blank

then enable DHCP.then u can get ip automatically.

set in your wireless lan adapter proprties tcp ip properties theh enable ip get auot amtically. thats it.

Posted on Nov 15, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

Hey there,
It always feels very nice to help others... right?
I have recently created this very helpful blog and i really want you to visit it...
If you are looking for further help and support like...
Blogging,
Promoting your Products or Services,
Technical Support, I have special tools and offers especially for you...
please visit http://primustel.blogspot.com
Do leave a feedback/comment if any.. i will work on it.
Thanks. Take care.
krohiti@aol.com

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Followed all the set up steps but my DSL light would not stay on


  • 1 Plug the Ethernet cable into the Internet port on your wall. If you do not have Internet ports installed in your home, connect a phone line adapter to a phone line jack. The adapter makes the phone line wider so Ethernet cables can connect to it. This does not block your phone from use.
  • 2 Plug the other end of the Ethernet cable into the Internet port on the back side of the Netgear DSL modem.
  • 3 Connect the Netgear DSL modem to a local power source. The power plug inserts into the modem via a small port on the rear of the modem.
  • 4 Insert a second Ethernet cable into one of the numbered ports on the back of the modem. Run the cable to your computer and plug it into the Ethernet port on the computer.
  • 5 Look on the back end of the DSL modem for an HTTP: address. Type this into your Internet browser's search bar. The Netgear DSL modem menu appears on the screen.
  • 6 Select how many computers are to use the modem, if you are using it with other DSL modems and set up a password (the default username and password is "admin"). Click "OK" to initiate the changes you made to the menu. You can now use your Netgear DSL modem to connect to the Internet.


  • Read more: How to Install a Netgear DSL Modem ' eHow.com http://www.ehow.com/how_5886784_install-netgear-dsl-modem.html#ixzz10lH4dl2y

    Sep 27, 2010 | NetGear DGN2000 Wireless Router

    1 Answer

    How do I resolve my internet port light being amber on my wgr614v7 netgear router


    Recommend that you go one step at a time.

    1) unplug the wireless router.
    2) reset your Cable modem or DSL modem. Wait until the lights show the Wide area network or WAN is working correctly before applying power to the Netgear wireless router.

    3) After a minute or so, its signals should change from amber to bright green.

    Repeat if necessary. If this doesn't provide the connectivity that you need, a call to your Internet Service provider may be necessary.

    Sep 06, 2010 | NetGear WGR614 Wireless Router

    1 Answer

    Netgear DG834G wireless router wth built-in modem doesn't connect


    Check if you have types all the configurations properly, namely Encapsulation / user name n password.

    Jun 21, 2010 | NetGear DG834G 54 Mbps 802.11g Wireless...

    1 Answer

    NETGEAR wirless router installation


    You can use below steps to install router

    ROUTER SETUP

    1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
    2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
    3. Put http://www.routerlogin.com/basicsetting.htm or 192.168.1.1 address bar. press enter
    4. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
    5. Click on lan ip setup under advanced.
    6. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
    7. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
    8. Power off the dsl modem and the router after making the connections.
    9. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
    10. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
    11. Access the router (http://192.168.10.1).
    12. Login to the router (Username = admin Password = Password).
    13. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
    14. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
    15. Click Apply.
    16. Logout of the router.
    17. Open up another browser window and try to access internet.

    Please rate the service positively if issue resolved
    Thanks for using Fixya

    Apr 04, 2010 | NetGear RangeMax WPN824 Wireless Router...

    1 Answer

    I recently converted from cable DSL to AT&T. My netgear wireless router worked perfectly. I installed the 2WIRE and have not been able to get a connection to the internet. The DSL light is on but...


    Are you trying to install the router.
    You can do it manually without the CD.
    make sure that your computer is able to go online through the modem.
    If your computer is able to go online through the modem
    Then you need to connect the computer to the router ad the modem to the router.
    open the set up page of the router and change the settings of the router according to the ISP.
    Click Here for step by step by instructions

    Jan 15, 2010 | 2wire 2700HG-B Router (2700HGB)

    1 Answer

    Internet light on wireless modem is red and wont connect to internet. DSL, Wireless and Ethernet port 4 are all connected with green lights. Wont properly connect the modem.


    If you connect the computer directly to the modem, does it work?
    If that works then the modem is working.
    Now connect the computer to the router and the modem to the router.
    You will need to open the set up page of the router to check the settings of the router.
    You can set up the router without the CD also.
    It is very easy.
    Click Here for step by step instructions about how to set up the router

    Dec 04, 2009 | NetGear DG834G Router

    1 Answer

    Can't connect Netgear router with ATT DSL


    After you hook everything up the first thing you want to do is power cycle everything. So unplug the power cord on the router and the modem, Then plug the modem back in first and once the lights all come back on then plug in your router and once those lights come up i would reboot your PC and see it that helps.

    Apr 08, 2009 | NetGear RangeMax WPN824 Router

    1 Answer

    Wireless INstallation


    you need to ring your ISP to get a network user ID and password, when you enter these in to the router settings the Internet light will light up green.

    Jun 08, 2008 | NetGear DG834G Router

    1 Answer

    ISP SBC SpeedStream 5100b Modem Causes Install and Connection to Fail


    Symptoms * You have a new router, and cannot get online to the Internet. AND * The Setupwizard will detect dynamic IP even though you have a PPoE connection. (Going to router status on the administration page, there is a private IP address on Internet port. 192.168.x.x range.) Cause The SBC DSL modem SpeedStream 5100b, used on new DSL and Yahoo SBC DSL installations since Feb. 2004, causes the NETGEAR router Setup Wizards to fail, and prevents routers from connecting to the Internet. This problem affects many router brands. The modem can be distinguished from the earlier 5100 by a 5th light labeled "Internet". The SpeedStream 5100b's default configuration is "PPPoE on the Modem" ? matching a built-in PPPoE client convenience feature that sends login ID and password to SBC. To Work Around These Issues, Configure the Modem for Bridged Mode Note: In Bridge Mode you cannot to connect to the modem's configuration menu, except by resetting it as described below. 1. Disconnect the router from your network, and connect the computer directly to the SpeedStream modem 2. Open an Internet browser. 3. Type 192.168.0.1 in the browser address field and click Enter. The modem displays a configuration menu. 4. Click Advanced. 5. Enter the "Access Code" printed on the bottom of the modem. 6. Click PPP Location. The PPP Location screen appears. 7. Select Bridged Mode (PPPoE is Not Used). 8. Click Save Changes. 9. Connect the router between the computer and the modem. 10. Power off the modem. 11. Power off the computer. 12. Connect the Internet port of the NETGEAR router to the Ethernet port of the modem. 13. Connect the computer to a LAN port on the NETGEAR router. 14. Power on the modem and wait for 2 minutes. Don't go to the next step until this is finished. 15. Power on the router and wait for 1 minute. Don't go to the next step until this is finished. 16. Power on the computer. 17. Log in to the router by typing 192.168.0.1 in your browser. 18. When prompted, using lowercase letters, type admin for the user name, and password for the password. Some older routers use 1234 for the default password. If you forgot your router password see http://www.fixya.com/ThreadView.aspx?thid=102081&prdid=252188 19. Use the Setup Wizard to connect to the Internet. To Reset the Modem To Enable Access to the Configuration Screen 1. Disconnect the computer from the modem. 2. Power off the modem. 3. Power off the computer. 4. Connect the Ethernet port of the modem to the computer Ethernet port. 5. Power on the modem and wait for 2 minutes. Don't go to the next step until this is finished. 6. Power on the router and wait for 1 minute. Don't go to the next step until this is finished. 7. Power on the computer. 8. Open an Internet browser. 9. Type 192.168.0.1 in the browser address field and click Enter. The modem displays a configuration menu. 10. Click Advanced. 11. Enter the "Access Code" printed on the bottom of the modem. 12. Click PPP Location. The PPP Location screen appears. 13. Select PPPoE on the modem. 14. Click Save Changes. 15. At the login screen type in your SBC member ID and password (which is usually the primary email address on the SBC DSL account and the password for the primary email address). 16. Click Connect. * If successful, a screen appears reading "You Are Connected", and the Internet light goes solid green. * An error will display if the username or password is invalid. * If there are other problems the message "The DSL connection is down" appears.

    Feb 19, 2006 | NetGear FR114P Router

    Not finding what you are looking for?
    NetGear DG834G Router Logo

    Related Topics:

    605 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top NetGear Routers Experts

    Barry37

    Level 1 Expert

    31 Answers

    MrNutsy

    Level 1 Expert

    36 Answers

    Phillip Whisenant
    Phillip Whisenant

    Level 2 Expert

    120 Answers

    Are you a NetGear Router Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...