27 inch Orion

Power supply or high voltage problem is most likely---in most cases fixing this 27 inch TV to work will cost more than buying a new set.

change your memory ic ( 8 pin ic ) or" reprogram your memory ic.channel store problem solve 100%.

if you have a menu button on tv shoul be able to do it there after you push the menu button then use the up or down button for selection then the volume up or down to ajust then menu to exit. Now if no menu button sometimes you can push the up down chanel button at the same time and get into the menu. Hope one of these works.

you have to make sure that if you are using external/additional speakers that you keep them away from console. I had a similar problem when I install a surround sound system in by bar and one of the speakers was very close to the TV. A good friend of mine walked in and said "if you want to get rid of that picture problem and save the life of the TV you had better move that speaker." It has to do with the magnets in the speakers.

Sorry No.

The flyback transformer, and some other components may have failed. The main power supply may also be damaged.

It is impossible to know the exact failed parts without trouble shooting the set.

Jerry G.

try to check a bad conections in hv transformer and capacitor around them

lost the remote?... try a different universal remote. i have a orion 27" but i think it has a menu button on the front of the set. im at work.. when i get home ill check and repost....if you dont want to buy another universal.. barrow a friends and give it a try... sometimes the manufacture puts updated CODE's for the remote on the website.. might check that as well. good luck.. more to come.

Bad electrolytic cap(s) in vertical deflection section.

that request is not available...firm-wared chip proprietary from orion