Question about Motorola Talkabout T5950 (7 Channels) 2-Way Radio

2 Answers

Cant get the beep sound off when keying it

My two way t5950 beeps when i key it

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I helded the {+} at the same time i turned it on and it seems to take the beep off i guess will see if it happens agian , thank you for your help maybe i"ll be calling you again. kenstoy67.

Posted on Nov 18, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Motorola Master
  • 1,640 Answers

Turning Keypad Beeps On/Off
Your radio comes with the keypad beeps turned on. To turn them off or
temporarily disable them:
1. Turn off the radio.
2. Press and hold the minus (-), while turning on the radio.
To turn the keypad beeps on again, repeat steps 1 and 2.

http://direct.motorola.com/ENS/T5920_T5950%20User%20Manual.pdf

Posted on Nov 16, 2008

  • eradiostore
    eradiostore Nov 19, 2008

    Very good. I see you were wanting to shut the "roger" beep off. And you are correct, hold in the plus (+) while turning the radio on, will turn this feature on or off.



    I had thought you were referring to the beep you get when pressing any front button or when turning the radio on. This beep is shut off using the directions I have you.



    I am glad it worked out for you.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My T5950 won't stop beeping when I push the PTT button. I tried holding the PTT in when I turn the unit on and that didn't stop it.


Very likely it is the battery. Beeping means not enough power especially when transmitting. Try charging the battery again, try transmitting again and plan on new batteries. They "wear out" even when not in use.

Oct 16, 2016 | Motorola Talkabout T5950 (7 Channels)...

1 Answer

LCD showing unlck and beeping


New or used? Or look for the unl key and press it down for 3-5 seconds on the beeping one. It could be a variety of problems, esp. if used.

Aug 01, 2012 | Chatterbox FRS X2 Communicator Two Way...

1 Answer

Walkie talkies model gmr325-2 ic;513C-UT914 HOW DO I GET THESE TO TRANSMIT, MY HUSBAND HAS CANCER AND WE NEED THEM IN OUR BEDROOMS AND WHEN I AM OUTSIDE, TK U, TK U


In order to get the most out of your new radio, read this reference guide completely before attempting to operate the radio.

Turning the Radio On and Adjusting the Volume

1) Press and hold the key to turn the radio ON.

2) To change the volume level press the volume/monitor up or down key to increase or decrease the volume level.

3) Press and hold the key to turn the radio OFF.

Adjusting the Sound (Key Beeps)

Your radio emits a beep each time one of the keys (except for the PTT button and call key) is pressed.
The sound of the Key Beep will increase or decrease depending on the volume level setting.

To turn OFF this beep:

Press and hold the call key while turning ON the radio.

To turn ON this beep:

Turn the radio OFF and ON again.

Choosing a Channel

Your GMR325-2 radio has 22 channels you can use to talk to others. In order to speak to someone,
each of you must be set to the same channel.

To choose a channel:

Press the channel/scan up or down key to increase or decrease the channel number displayed.

Channel Scan Feature

Your GMR325-2 radio has a channel Scan feature that allows you to easily Scan all 22 channels. When an active channel is detected, the unit will pause on that channel until the channel is clear. Then after a 2 second delay, the unit will continue scanning.

Pressing PTT button while the Scan is paused on a channel will allow you to transmit on that channel.

To turn ON channel scanning:

Press and hold either the channel/scan up or down key. The channel number on the display
will rapidly cycle through the channels.

To turn OFF channel scanning:

Press either the channel/scan up or down key.

Talking on Your Radio

To talk to others using the radio:
1) Press and hold the PTT button and speak in a clear, normal voice about 2-3 inches away from the microphone.

While you are transmitting the tx icon is displayed. To avoid cutting off the first part of your transmission, pause slightly after pressing the PTT button before you start talking.

2) When you are finished speaking, release the PTT button.You can now receive incoming calls. While receiving, the rx icon is displayed.

Transmitting a Call Alert Tone

Your GMR325-2 radio is equipped with a call tone that will be transmitted when the call key is pressed.

To transmit the call alert tone, press the call key.

The tone will automatically be transmitted for a fixed length of time.

Auto Squelch Feature

The GMR325-2 is equipped with an automatic squelch system which shuts off weak transmissions
and unwanted noise due to terrain conditions or if you have reached your range limit.

Monitor Mode Feature

Your GMR325-2 radio allows you to listen for weak signals on the current channel at the press of a key.

To turn ON monitor mode:

Press and hold the volume/monitor up or down key. The rx icon will blink.

To turn OFF monitor mode:

Press the volume/monitor up or down key. The rx icon will stop blinking.

Automatic Power Save Feature

Your GMR325-2 has a unique circuit designed to dramatically extend the life of the batteries. If there is neither transmission nor an incoming call within 2 seconds, your radio switches to the Power Save mode. The radio is still able to receive transmissions in this mode.

KEYLOCK ON/OFF

Press and hold the call key until the "L" appears. After 1 second, the LCD will return to the channel display.
To exit Keylock on mode, press and hold call again.

Note: While in keylock on mode, it will still receive transmissions.

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission.
Roger Beep can be heard through the speaker when Key Beep is on.
Roger Beep is transmitted even if key beep is turned off. However Roger Beep will not be heard from the speaker.

To turn OFF Roger Beep: Press and hold the channel/scan up Key while turning on the radio.

Jun 21, 2011 | Motorola Walkie Talkies 2-Way Radio

1 Answer

I cant get the beeping noise to stop when i key the raido


Here is a link to the manual: http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T5XxX_User_Manual_E.pdf See page 7 for instructions on the "roger beep", and "call tones".

Best regards.

Jan 06, 2011 | Motorola Talkabout T5210 2-Way Radio

1 Answer

I NEED TO KNOW HOW TO CLAER THE BEEPING SOUND WHEN YOU KEY THE BUTTON


The beeping sound when you key the button is called the roger beep. To turn it off, with the radio off, press and hold the "up" button and turn on the radio. More information about all the settings is in the user manual, available HERE.

Nov 13, 2010 | Uniden GMR1038-2 (7 Channels) 2-Way Radio

1 Answer

How do i turn of the beep when keyed


Hold in the - button while turning the radio on.

Here is a link to the user guide: http://www.giantintl.com/ContentManage/manuals/Moto/T59xx_User_Manual_E.pdf

Best regards.

Aug 14, 2010 | Motorola Talkabout T5950 (7 Channels)...

1 Answer

T5950 Talk abouts


They are probably not programmed to match one another. There are 3 key settings on these radios: Frequency, Interference Eliminator and Qt Filter. If you walk through the programming instructions for each of these and set them identically, they should communicate.

http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T59xx_User_Manual_E.pdf

Feb 03, 2009 | Motorola Talkabout T5950 (7 Channels)...

1 Answer

To stop the beep when keyed


Hold in the minus (-) button while turning on the radio will shut off beeps.

http://www.usersmanualguide.com/motorola/2-way_radio/t5950

Nov 15, 2008 | Motorola Talkabout T5950 (7 Channels)...

Not finding what you are looking for?
Motorola Talkabout T5950 (7 Channels) 2-Way Radio Logo

Related Topics:

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Two-Way Radios Experts

eradiostore
eradiostore

Level 3 Expert

1640 Answers

Iron
Iron

Level 3 Expert

3018 Answers

bill tarkulich

Level 1 Expert

33 Answers

Are you a Motorola Two-Way Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...