Question about Crosman (4032)
I need to reassemble my how crosman airgun powermaster 664sb
SOURCE: crosman airguns 357 6 shot
What part are you having trouble with?
I have had mine apart several times trying to repair a leaky valve.
Could possibly make a you tube clip.
Posted on Dec 30, 2007
The trick to assembling the trigger mechanism is to assemble the trigger parts on the left half of the receiver. This will leave the v shapped spring hanging out the bottom of the trigger guard. I assembled the barrel to the right side of the receiver and then but the two halves together. loosely attached the halves with the two long screws. I then used a jewlers screw driver to work and hold the end of the V spring behind of the safety button hole. At this point I inserted the safty button into the hole as I gradually removed the screw driver. Then clamped down the attachment screws.
I spent some 2 hours figuring this trigger assembly out and another half hour putting it together. The biggest mystery was the use of the L shapped part. It ends up being assembled to the trigger pin. the cleat catching the back of the trigger and the long side of the L laying against the left side of the receiver (pointing up). The small tention spring ingages the back of this L shapped part (just above where the cleat ingages the trigger) and the other end of the spring ( the straight end) rests against the bottom of the receiver.
Posted on Nov 23, 2008
Tips for a great answer:
Feb 07, 2012 | Crosman Spotting Scopes
Mar 23, 2011 | Crosman (4032)
Dec 19, 2009 | Crosman (4032)
Apr 11, 2009 | Crosman (4032)
Mar 04, 2009 | Crosman (4032)
Feb 12, 2009 | Crosman (4032)
Mar 12, 2008 | Crosman (4032)
270 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: