Question about GE RM24906 Remote Control

1 Answer

GE universal Guide Plus Gemstar Programming Difficulties.

Hey There,

I'm just trying to program this old GE remote, but it does not seem to have a "CODESEARCH" and or "SETUP" button on the remote. If you could help me out in anyway it would be a great help.


Thank you.

Posted by on

  • Anonymous Feb 24, 2009

    I need programing codes

  • Anonymous May 20, 2009

    I have the same problem.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 144 Answers

Here's a great website where most GE remote control codes are easily viewed or downloaded.
http://www.jascoproducts.com/support/universal-remote-codes.asp
Sincerely, cbr2009

Posted on Jul 01, 2009

4 Suggested Answers

  • 1694 Answers

SOURCE: Pregramming my RCA Gemstar Video Plus remote with no codesearch button!

www.remotecodelist.com ........................................T.

Posted on Mar 22, 2008

  • 1694 Answers

SOURCE: RCA Gemstar Remote codes???

www.remotecodelist.com ..................................................T.

Posted on Mar 22, 2008

  • 1 Answer

SOURCE: RCA UNIVERSAL GUIDE PLUS GEMSTAR

http://support.rcaaccessories.com/index.html

http://www.remotecentral.com/features/r-rca.htm

Try using the information from these two websites. It may help.

Posted on May 08, 2008

  • 1 Answer

SOURCE: I need the codes for the RCA universal remote

i need code to program my universal remote to my premium tv

Posted on Nov 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i program an GE universal remote to a iview dvd player


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Apr 07, 2012 | Remote Controls

1 Answer

How to program a ge universal remote to a sharp tv


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Apr 06, 2012 | GE 24993 Remote Control

1 Answer

I need the code(s) for a GE universal remote for an Apex TV!


You can try the following codes for your APEX tv:

0214 0216 0215 0401 0156


Here's how to program your remote:
1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code
Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press ON•OFF. If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand.

Jun 11, 2011 | GE RM94930 Remote Control

2 Answers

Need a code for zenith/vcr combo.


Program a GE Universal Remote Using Code Search Make sure the device for which you want to program the remote is turned on, and that the GE universal remote has good working batteries in it. Batteries that are weak may keep the universal remote from being programmed. Press and hold the Setup or Code Search button. Again, the name of the button will vary between GE universal remote models. Once the indicator light is lit, you can stop pressing the button. Press the button with the name of the device for which you want to program the GE universal remote (such as TV or DVD) and release it immediately. The indicator light should flash a time or two and then simply stay lit. Now all you have to do is point the GE universal remote at the device you selected, press the Power button and release it. The catch is that if the device does not turn off, you must wait at least two seconds and try again. The GE universal remote will attempt to program the right code for the device, cycling through all of its built-in codes. This can take up to 250 attempts. When the universal remote (finally) catches the right code and is programmed, the device will power off. Once this happens, press the Enter or Save button on the GE remote to complete the programming process. and for free

Jun 02, 2011 | Remote Controls

1 Answer

How do i program remote if it doesnt have a codesearch button


Your progaming instruction can be found in the owners manual here's a link if you don't have it:

RCA RCR4383N Manual

and this list of programing codes:

RCA RCR4383N Code List

Don't forget to rate if this was helpfull :-)

Sep 17, 2010 | RCA RCR4383 Remote Control

1 Answer

Lost my manual - need tv codes - ge universal remote - tv to program is a rca xl100 remote


Hi! The code of a GE Universal remote for a RCA TV are 0031, 0004, 0048, 0054, 0094, 0100, 0102, 0107, 0129, 0191, 0005, 0009, 0000, 0162, 0163, 0342, 0003 ,0015, 0022, 0096, 0113, 0125, 0179, 0187, 0188. In case none of these works for your TV you can try these steps for you to program your remote conrol.

1. Manually turn on the TV.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and quickly release the desired TV button. The red indicator blinks off once.
4. Press the ON-OFF button repeatedly (up to 300 times) until the TV to be controlled turns off. The red indicator blinks off with each button press.
5. Press and release ENTER to install the code.

Jun 14, 2010 | GE JASRM24912 Remote Control

1 Answer

PROGRAM MY GE 24911 TO MY TOSHIBA DVD.


Here are the steps on how to program your Ge Remote to your Toshiba DVD.

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the DVD button. The red indicator blinks, then stays lit.
3. Enter the 3 digit code indicated below.
Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator fl ashes.
4. With your device on, press ON•OFF. If the device turns off, no further
programming is required.
Note: If some buttons do not operate your
equipment, try one of the other codes below.

Note: Code for Toshiba DVD are 360, 394, 398, 436, 447, 890, 902, 908

Jun 12, 2010 | GE Remote Controls

1 Answer

I NEED THE CODE REMOTE CONTROL GE RC24912 FOR TV ORION


1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired device button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press ON?OFF. If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. sorry cant find codes just google the remote code for the device you want to program

Jun 10, 2009 | GE JASRM24912 Remote Control

4 Answers

Trouble programming Universal Remote to a DTV Converter Box...


Not a complete solution, but, around the last page (pg. 14) of your converter box manual there are codes listed for universal remotes. I happen to have a Philips remote that is listed. My code to control my dtv box is 0354. It appears that they have all codes listed for all Radioshack model universal remotes. I would suggest getting a Radioshack remote for Your "Digital Stream" (Radioshack) dtv box...

Apr 21, 2009 | GE JASRM24912 Remote Control

1 Answer

UNIVERSAL REMOTES


I have the book (list) that comes with the remote. It explains how to do a "code identification". It's pretty simple. Press and hold the Codesearch button until the light stays on ... then press and release the "Mode" button (the button that represents your TV or DVD or whichever device you are starting with, in your search for a code). It will blink briefly once and then stay lit. Now press and release the Codesearch button again (the indicator light will briefly blink). Now, to find the first digit of your code, start at "0" and enter slowly, one at a time, 0 thru 9 until the indicator light blinks off. THAT was the FIRST number of your code. Write it down. Now, repeat the process to find your second number of your code - starting over at "0" and enter slowly, one at a time, 0 thru 9 until the indicator light blinks off. THAT will be the second number of your code. Continue until you have all 4 numbers. Repeat for each device, until you have all codes desired.

Nov 28, 2008 | Remote Controls

Not finding what you are looking for?
GE RM24906 Remote Control Logo

3,961 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Peggy Cook
Peggy Cook

Level 1 Expert

7 Answers

Are you a GE Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...