AGP Device Gigabyte GeForce FX 5200

Hi patto1974, this is a good Model Graphics Card, for the ASUS Motherboard that you have. ASUS is one of the leading Manufacturers in "Gaming Computers; so you want to have a Graphics Card to compliment the system.
This is the (Model):
"HIS- H467QS1GHA
Radeon HD 4670
IceQ Video Card
1GB GDDR3
AGP, DVI, VGA,HDMI
Item#: H231-4678 '
Model#: H467QS1GHA."
You can find this "Model at Tiger Direct, along with other models.
Use AGP x8 as the reference search!

Click here: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6076197&CatId=318

Hope you are satified, paul7of9

Hi,
according to the specs memory must be as listed type 184 pin non-ecc ddr @ 400 speed
http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=VI7&fMTYPE=Socket%20478&pPRODINFO=Specifications

as for the video card you can try this one.
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4420155&CatId=2234
GL
hope this helps

Don't forget to vote for me
Thank You
Jammer

System
System : PACKARD BELL BV ISTART F2310 AIO
Mainboard : PACKARD BELL BV GA-T671MG
Bus(es) : ISA AGP PCI PCIe USB
Multi-Processor (MP) Support : 1 Processor(s)
Multi-Processor Advanced PIC (APIC) : No
System BIOS : Phoenix Technologies, 255.255
Total Memory : 767MB

Intel Pentium D 3.00GHz
Packard Bell BV (GA-T671MG)
SiS chipset (Si671V11)
DDR2
1024mb ram

PACKARD BELL BV
Model GA-T671MG

Chipset Vendor Silicon Integrated Systems (SiS)

CPU Intel Pentium D
Cpu Socket LGA775 [Socket 775]
Processor Upgrade ZIF Socket
Max CPU Speed 3000 MHz

System Slots 2 PCI, 1 AGP

Memory Summary
Location System board or motherboard
Maximum Capacity 1024 MBytes
Memory Slots 2
Error Correction None
Use System memory
Maximum Memory Module Size 4096 MBytes

Manufacturer PACKARD BELL BV
Model GA-T671MG

Chipset Vendor Silicon Integrated Systems (SiS)

CPU Intel Pentium D
Cpu Socket LGA775 [Socket 775]
Processor Upgrade ZIF Socket
Max CPU Speed 3000 MHz

System Slots 2 PCI, 1 AGP

Memory Summary
Location System board or motherboard
Maximum Capacity 1024 MBytes
Memory Slots 2
Error Correction None
Use System memory
Maximum Memory Module Size 4096 MBytes
it seems this might vary i have listed 4
hope this helps

Looks like the max is 2 x 184-pin DDR DIMM socket support up to 1 GB, which means you can get 2 512MB DDR266/200 2.5V DDR SDRAM chips.

as far as video cards, it will accept any AGP 4x or lower card. You could also put a PCI video card in it, but AGP is better.

Field Value North Bridge Properties North Bridge SiS 661FX Revision 11 Memory Timings CAS Latency (CL) 2.5T RAS To CAS Delay (tRCD) 3T RAS Precharge (tRP) 3T RAS Active Time (tRAS) 5T Memory Slots DRAM Slot #1 256 MB (DDR SDRAM) DRAM Slot #2 512 MB (DDR SDRAM) Integrated Graphics Controller Graphics Controller Type SiS 330 Mirage Graphics Controller Status Enabled Graphics Frame Buffer Size 32 MB AGP Controller AGP Version 3.05 AGP Status Enabled AGP Device SiS 330 Mirage Integrated AGP Aperture Size 64 MB Supported AGP Speeds 1x, 2x, 4x, 8x Current AGP Speed 8x Fast-Write Not Supported Side Band Addressing Supported, Enabled Chipset Manufacturer Company Name Silicon Integrated Systems Corporation

Regarding your MSI K8N NEO2-Platinum (MS7025) Motherboard, it should have one AGP (Accelerated Graphics Port) 1.5V 4X/8X slot and an nVIDIA® nForce3 Ultra Chipset. There are a few links below I think will greatly help you.
Sincerely,
CBR2009

Click here for information on the motherboard:
http://www.msicomputer.com/product/p_spec.asp?model=k8n_neo2_platinum

Click here for information on the nVIDIA nForce Ultra Chipset.
http://www.nvidia.com/page/pg_20030918437537.html
(a snippet from that page)
Connectivity - AGP interface
Supports AGP3.0 - 0.8 V signaling for 8× and 4× with Fast Writes data transfers
Supports AGP2.0 - 1.5 V signaling for 4×, 2×, and 1× modes with 4× and 2× Fast Writes data transfers
Supports graphics address remapping table (GART) features
The AGP3.0 8× 533 MT/s (million transfers per second) interface provides the user with the ability to upgrade the external graphics card, thus avoiding obsolescence. An external AGP add-in card achieves higher performance than it would on existing platforms.
AGP interface is backward compatible with the AGP2.0 specification.
Click here for AGP information:
http://www.interfacebus.com/Design_Connector_AGP.html
And last, but not least YES!!, there is a WIKI page on the AGP.
http://en.wikipedia.org/wiki/Accelerated_Graphics_Port
(a snippet from that page)
As of 2009 [update], few new motherboards feature AGP slots. No new motherboard chipsets are equipped with AGP support, but motherboards continue to be produced with older chipsets that have AGP support. PCI Express allows for higher data transfer rates, has more robust full-duplex support, and also supports other devices.

Go under your start menu and click on windows update, and when it pulls up internet explorer click on custom install and you'll see all the updates click on hardware and see if windows can install the driver.

Yes, the DFI AK75-AL motherboard has a VIA KT-133A chipset which is compatible with a FX5200 videocard, but not at the full 8x AGP speed (as the videocards supports) but only at 4x AGP speed (maximum speed supported by the motherboard).

PS: Make sure you use the newest motherboard BIOS en VIA chipset drivers to ensure compability.

Processors

• Supports all Socket 478 CPUs (400FSB & 533FSB)

Chipset

• North bridge: Intel I845PE MCH
• South bridge: Intel ICH4

System Memory

• 3 x 184-pin DDR SDRAM
• DDR200 / DDR266 / DDR333 support @ 2.5v
• 3GB maximum system RAM

Slots

• AGP slot, 4x AGP compliant (1.5v support only)
• 6 x 32-bit PCI 33MHz slots

On-board peripherals - I/O

• 1 floppy port supports 2 FDD
• 3 Audio Jacks for the CMI9738 sound chipset
• CMI9738 6-channel sound
• Davicom 10/100 LAN (10/100 Mbit/s)
• 2 USB2.0 ports and a further 4 available via headers
• PS/2 ports

On-board IDE

• An IDE controller on the ICH4 chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA/100/66/ operation modes
• Highpoint HPT371 RAID single-channel ATA133 RAID controller
• Ultra DMA/ATA133, 100, 66, 33 operation modes
• Supports up to 2 hard drives
• Serial ATA support via the Marvell 88I8030 single-ATA bridge
• Supports 1 S-ATA drive

BIOS & Voltages

• FSB speeds of 100Mhz - 255Mhz (quad-pumped)
• 1.1 - 1.85v Vcore adjustable in 0.025v increments
• 2.5v - 2.8v Vmem adjustable in 0.1v increments
• 1.5v - 1.8v VAGP adjustment
• Fix AGP/PCI speeds and variable settings

ya go for it it will may lower card specks if u have any limitations but your ok agp 8x 4x slot