Question about Kodak EasyShare Z740 Digital Camera

1 Answer

My camera acts like the battery is low, also Error #E45

The lens does not retract nor go out, the tele button does not work. I was using the camera when a blue screen appeared with E45 see user guide. I have gone to the guide. I have recharged the batteries, cleaned them. I have taken out the SD card and put it back in. My guide said something about it not working if it was in "favorites mode" which I cannot find. I have had the camera about 3 years. Could it be my rechargable battery? If you have any suggestion I would appreciate your help
Thank you , Gena Harness

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a message Error # E45 in my V570 EasyShare Camara, during a very nice trip to Easter Island and lost many opportunities for beatiful pictures. It was very pity for me. Please help me with a...


This error means the lens is not properly retracting or coming out..Firmly hit the lens on the palm of your hand and as it starts to retract give some gentle assistance. Turn off the camera and then back on and hey presto no error message displayed and the camera will work

Nov 03, 2010 | Kodak EasyShare V570 Digital Camera

3 Answers

Error E45


Remove the SD memory card from the camera. Turn the camera off. Wait 10 seconds. Press and hold the DELETE button while turning the camera on. The Lens should retract, the error should clear.

Jun 01, 2010 | Kodak EasyShare V530 Digital Camera

1 Answer

Camera locked - camera error #E45


Hi

www.Kodak.com says:
"E45" appears on your camera's display when your camera requires service or repair.

I think it is a lens error. They have a page on www.kodak.com called Step-by-Step Solutions and Repair. This is for USA only.
See what they suggest.

I may be cheaper just to get a new camera.

Hope this helps.

Feb 21, 2010 | Kodak EasyShare LS753 Digital Camera

1 Answer

Easyshare Z612 with an error code of #e45


Itøs a lends error. There is not much else to do than to send it in for repair or go for a trade up.

OoW repair for this model w. this fault: 88,07 Pounds.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

Nov 14, 2009 | Kodak EasyShare One Digital Camera

1 Answer

Lens wont retract with or without new batteries. green light blinks but no lens movemant even using wide/tele buttons


Since you already used new batteries and still lens will not moved and you can just see flashing green it means that the Gar of the camera is defective You may call repair center specialize with kodak camera's at 1 800 665 6515

Nov 09, 2009 | Kodak EasyShare C340 Digital Camera

2 Answers

ERROR CODE E45 pops up on start up. I have been


Hi,

E45 means the lens is jammed, tip so lens is facing down and shake to see if you can dislodge. Look between the lens and the body and see if you can see any dirt or sand..

As you have identified, the cost of repair is more than the value of the camera so you have nothing to lose from here...

Try and dislodge the lens, smack the camera into your hand to try and free up lens, wiggle the lens to try and free it up.

If no luck dismantle the camera and see if you can free up...
Unless the last option would be to throw it and purchase a new camera.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Oct 23, 2009 | Kodak EasyShare V705 Digital Camera

2 Answers

Kodak easyshare ls743. lens wont retract. camera error #E45 shows on screen. battery is fully charged.


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Apr 23, 2009 | Kodak EasyShare LS743 Digital Camera

2 Answers

PowerShot SD630 lens stuck out, says lens error, restart camera


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/

Mar 24, 2009 | Canon PowerShot SD630 Digital ELPH / IXUS...

1 Answer

E 45 error


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Aug 20, 2008 | Kodak EasyShare DX6490 Digital Camera

1 Answer

Kodak easyshare z760 can go to favorites and not turn on to take a picture


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Nov 05, 2007 | Kodak EasyShare Z760 Digital Camera

Not finding what you are looking for?
Kodak EasyShare Z740 Digital Camera Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Digital Cameras Experts

kakima

Level 3 Expert

96417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Kodak Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...