Question about Sharp AR-M205 Copier
Entering sim 14 will make that go away for a day or two.. when it comes back this this what it maens...
Fusing Unit problems...
h4 - 00
Heat roller abnormally low temperature
The setup temperature (about 90°C is not
reached within the specified time (about
35sec) from turning on the power ON SW.
(When the temperature falls below 120°C
in the standby mode.)
Heater lamp failure
Posted on Nov 22, 2008
To access the service mode.
enter the folowning keys .PROGRAM .ITEREPT .CLEAR INTERPT MUST BE IN SEQUENCE
THAT ENTER NUMBER 14 THAT START BOTTON
HOPE THAT HELP
Posted on Nov 15, 2008
Tips for a great answer:
May 21, 2010 | Sharp AR-M205 Copier
May 04, 2010 | Sharp AR-M205 Copier
Mar 01, 2010 | Sharp AR-M205 Copier
Mar 04, 2009 | Sharp AR-5316 Advanced Digital Imager...
107 people viewed this question
Usually answered in minutes!