Question about Plantronics Explorer 220 Bluetooth Headset Wireless Headset

3 Answers

Passkey need passkey for my platronics bluetooth 220

Posted by on

  • 6 more comments 
  • Anonymous Nov 21, 2008

    have any found a solution to this problem?

  • ddidee Nov 23, 2008

    I had to get a new phone on the road while on vacation. I wasn't driving, so I didn't think of my headset at the time. When I got home, I couldn't find my paperwork/passcode. I don't want to buy a new headset....is there a generic code I could use?



    Thanks...

  • Anonymous Nov 23, 2008

    Did anyone receive the generic passcode to link the Plantronics 220?

  • Anonymous Dec 03, 2008

    I need the passkey/pin for the headset to connect to the Samsung Delve phone.

  • MISS JANICA Dec 11, 2008

    I DON'T KNOW MY PASS KEY I LOST THE MANUAL AND I NEED IT TO CONNECT TO MY CINGULAR PALM CENTRO. PLEASE HELP ME

  • cecilia alvarez Feb 18, 2009

    i got a bluetooth as you can see, and i lost my packet where it should say my passcode for 220plantroincs. My phone is at&t cell and i guess for mine it has to have one and i don;t remember my passcode.

  • cecilia alvarez Feb 18, 2009

    i lost my packet where it had the code for my bluetooth and i just want to know if this website can give it to me?

  • jbarillas Feb 20, 2009

    I lost my box with keypass. And need to reset my device.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The passkey is 0000. If you have a problem, reset the headset. Turn the headset off and hold down the call button for 8 seconds until the headset flashes blue and red signaling that it is in pairing mode for the next 120 seconds. While the headset is in pairing mode, use the phone menu to search for Bluetooth devices and select "220Plantronics." (If the headset is already listed in the Bluetooth menu, delete it before searching to pair the device.) When prompted for a passkey, enter 0000. Headset will falsh blue when paired successfully.

Posted on Dec 17, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Dont know passkey

Posted on Nov 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I LOST MY MANUAL AND I DON'T KNOW MY PASS KEY. AND I CAN'T CONNECT MT BLUETOOTH TO MY PALM CENTRO WITH OUT IT. CAN YOU PLEASE HELP ME

Posted on Dec 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can I pair my Bluetooth earphones to my iPad?


How to pair Bluetooth headphones to IPAD?
Most headsets have a power button or a switch to turn the device on. Press the "Pairing" button on your Bluetooth headset, if necessary. Select your headset from the Devices list on the iPad's Bluetooth window. Enter the passkey or PIN for your headset, if prompted.

Does the iPad Pair With Bluetooth Headphones? ' Chron.com

smallbusiness.chron.com/ipad-pair-bluetooth-headphones-62883.html Search for: How to pair Bluetooth headphones to IPAD?

Dec 05, 2016 | Radio Communications

2 Answers

Can't pair to iphone 3g


Hi, the iPhone 3G definitely does work with bluetooth. In fact, I'm talking on a bluetooth headset with my iPhone 3G right now.

You have to put both your Southern Telecom Emerson Bluetooth Headsetand the iPhone in "pairing mode".

On your iPhone, click the Menu button, tap the Settings icon, tap the General icon, and then tap the Bluetooth icon. Make sure that 'Bluetooth' is set to "ON" and not "OFF". As long as you have this screen up, your iPhone is in pairing mode.

Turn your Southern Telecom Emerson Bluetooth Headset off and wait a few seconds. On your Southern Telecom Emerson Bluetooth Headset, press and hold and Answer/End button for Five Seconds, until a solid blue light comes on, which places the device in Bluetooth discoverable mode.

Now that both devices are 'discoverable', the Southern Telecom Emerson Bluetooth Headset will show up on that Bluetooth screen on your iPhone. Be patient as it might take a minute to appear. Tap on the Southern Telecom Emerson Bluetooth Headsetin the list on your iPhone, and then it will ask you for a passkey. The passkey is "0000" (without the quotes). After you enter the passkey, the Southern Telecom Emerson Bluetooth Headset will show up on the list with the word "Paired" next to it.

Now you're paired! Incoming calls will automatically be passed to your headset as long as your iPhone can find it nearby.

Good luck.

Feb 23, 2011 | Southern Telecom Emerson Bluetooth Headset...

2 Answers

How do i make it work with an i pod


You need a bluetooth adapter,
search for "bluetooth adapter for ipod" on Google or eBay, to see what's around.

Jan 28, 2011 | Insignia Bluetooth Wireless Headphones...

2 Answers

Need passkey to connect motorola h350 to my new phone


The default Motorola passkey is 0000, try hat now, but be sure to follow the instruction to which you will link you bluetooth headset!!

have fun

Jun 27, 2010 | Motorola Mobility H350 Wireless Headset

2 Answers

What is the pass key to my insignia bluetooth headset ns-bthdst


bluetooth Passkey
By default all bluetooth devices come with a 0000 passskey must earpieces won't allow you to change it unless is a very high tech device.
try that remember 0000 is the code.


if it works for you don't forget to rate me
thx

Apr 30, 2010 | Insignia Bluetooth Wireless Headphones...

2 Answers

How do i connect my backbeat 903 to my phone


Pairing Your Headphones and Phone/Device

1 Turn on your phone’s or device’s Bluetooth® feature.
2 With the headphones powered off, press and hold the Power/Pairing button until the LED indicator flashes blue and red.
3 Use the phone or device menu to search for the Bluetooth headphones and select 9xxBackBeat.
See your phone’s or device’s user guide for more information.
4 If prompted, enter 0000 for the PIN code/passkey.
Some phones also require that you accept the connection. Pairing is successful when the LED indicator flashes blue.

(from plantronics web site)

Apr 04, 2010 | Altec Lansing BackBeat Plus Mobile ...

2 Answers

Need password for milos-9 bluetooth


try 0000 (4 Zeros) if that doesn't work try one of these:
1111, 1234, 9999

Jan 04, 2010 | Insignia Bluetooth Wireless Headphones...

2 Answers

Motorola S805 headset worked fine with T60 laptop


Solution I found with the same devices is to properly par the devices.

Refer http://direct.motorola.com/ens/s805/QuickstartGuide.pdf

It basically states :

1.Ensure the headphones are turned off (L indicator light not blinking).
2.Press and hold L button. After about 6 seconds, the L indicator light becomes steadily lit.
3.Release the L button. The L indicator light remains steadily lit.

If the L indicator light is flashing or not steadily lit, repeat steps 1 through 3

Now on the T60:

Search for Bluetooth Devices as you would normally.
The T60 lists Bluetooth devices it finds.
Select Motorola S805.
Select OK or Yes to pair your headphones
with your phone.
Enter the passkey: 0000
Select OK.
When your headphones successfully pair
with your phone, the L indicator light
changes from steadily lit to rapidly flashing.

That's it next time you start a audio program on T60 output will be sent to Motorola Headphones

Nov 13, 2009 | Motorola Mobility S805 Wireless Headset

2 Answers

I can not my headset


1. There may be a switch on the headset. Please switch it on.
2. click Connect headset on the Bluetooth window

Dec 20, 2008 | Insignia Bluetooth Wireless Headphones...

2 Answers

Connect trueblue bluetooth headset to Samsung Eternity cell phone


I had the same poroblem. I turned the phone off and then restarted it. That worked for me. Try to make a phone call and see if you can hear it on the Bluetooth.

Also... compliments of Best Buy Troubleshooting -

Bluetooth Troubleshooting: Phones & Headsets

Problem #1:
Headset and phone are turned on, but you don't hear anything in the headset, i.e., there is no dial tone.
Action #1: Make sure your phone is Bluetooth-capable. If it is not: A. Buy a new Bluetooth-capable phone. B. Purchase a Bluetooth adapter for your non-Bluetooth phone. The adapter will allow your phone to interact with a Bluetooth headset.

Problem #2:
It's a Bluetooth-capable phone and Bluetooth headset, both are turned on, but you still don't hear anything.
Action #2: Make sure your phone, headset, and, if necessary, adapter are fully charged before attempting to synch the Bluetooth connection between the two devices - in many cases a blinking blue light will indicate the headset is charged.

Problem #3:
Everything is charged, but still not working.
Action #3:Before two Bluetooth-enabled devices can communicate with each other, they need to be initially synched up to each other - also referred to as linking or pairing.
A. Find "Communications" or "Connections" on your phone's menu screen and explore within to locate "New" or "Bluetooth."
B. Push the main button on the headset until the light shines solid blue and is NOT blinking. C. Select Bluetooth on phone menu. Within Bluetooth you may need to select and highlight "Devices" or "Find Devices" (depending on where you are, there may be other Bluetooth devices available).
D. While the headset light is solid blue, open the Bluetooth link (or Find Devices) on your phone's menu screen and scroll through until you locate the headset you wish to synch up to. Your phone will automatically begin searching for Bluetooth devices within 30 feet of itself.
E. After a short period of time, your menu screen should say "connected" or "devices paired". Make sure you click or select the device name to finalize the connection. If you have successfully paired the two devices, you will hear a dial tone in the headset. Congratulations! You've joined the Bluetooth world.

Note: After a couple of minutes showing solid blue, the light on the headset will start blinking; you want to pair up the phone and headset while the light is still unblinking. This is important. If the light starts blinking before you can complete the connection, you will need to turn the headset off and on and start over.
Problem #4:
You've followed all the instructions in this guide, and your Bluetooth connection is still not functioning properly.
Action #4: Take out your manual and carefully reread the section on synching up Bluetooth devices. If you still can't get things properly connected, we suggest you call the manufacturer regarding this issue.
Motorola: 1-877-MOTO-BLU for troubleshooting, or www.hellomoto.com
Jabra: 1-800-327-2230 from 8 a.m. to 8 p.m. EST for technical support; or www.jabra.com

I hope this helps.

Dec 19, 2008 | True Blue TB-50CR Bluetooth Headset

Not finding what you are looking for?
Plantronics Explorer 220 Bluetooth Headset Wireless Headset Logo

Related Topics:

864 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plantronics Radio Communications Experts

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

waldofrog

Level 1 Expert

34 Answers

shaun taylor

Level 3 Expert

1254 Answers

Are you a Plantronics Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...