Samsung camcorder vp w60

If a Samsung Authorised service department looked at it, to get it working properly, they would replace all of the leaking organic electrolytic capacitors at a substatial cost.

MiniDV cameras have two video heads on the rotating drum, which read and write the picture in broad horizontal bands. When one head is not working, normally because it is clogged by dust/dirt/tape residue, you see broad bands of noise across the image occupying exactly half the total image area.......

Yes, you need the driver for that. Insert the dvd that came with your samsung camera. You can also get the driver from samsung's website.

David

You'll have to tell us what "this" model is. The model number of the battery charger doesn't tell us much about the camcorder itself.

$8.76 on Amazon: http://www.amazon.com/Samsung-Replacement-VP-W60-camcorder-charger/dp/B001C1SUOO

Could be your CCD need to change. This is common problem to almost all camera manufacturer. Hope it helps

samsung VP-W60 8mm camcorder cerco driver per scaricare video nel computer

It will depend on the Make and Model of your TV set.

If you are using an Analogue TV or a Video Player/Recorder, it will have Line IN and AV IN connections (these are Yellow (Vision), Red (Audio) and White (Audio).

You can download the Manual for your camera from link below :

http://www.samsung.com/au/support/detail/supportPrdDetail.do?menu=SP01&prd_mdl_name=VP-W60

Page 14 lists the components that came with and are available for the Camcorder.

Page 50 contains the instructions for connecting the Camera to the TV or Video via the cable that came with the camera or a purchased SCART cable.

Page 60 contains the Specifications for the Camera and the cable type is listed under Connections section (Video Out and Audio Out).

NOTE: Not all digital TV's have the RCA connections. However, some do.

I hope this is helpful. Regards,

you can download user manual at:

http://downloadcenter.samsung.com/content/UM/200305/20030512145445687_W60-UK_CZ.pdf


You will however have to follow all instructions on the webpage before you download.

the way you can transfer your videos on your computer is by using USB cable and install the driver to your computer. You can upload your videos by saving it on ULEAD products. As far as i know you cant transfer videos from disc to your memory card unless it was been converted but you cant view or watch it on your camcorder itself only computer can play this because your camcorder is not able to play such converted files.

i will give you a step by step on your camcorder.

• connect your camcorder using your USB cable to your computer and be sure it is ON
• Install the cd driver camed with your camcorder. if you didnt prompt on looking for a driver then go to the add hardware on the control panel and follow the procedure there.
• after the installation you should see the icon on the my computer labeled scanners and cameras and indicating the model of your camcorder.
• Install Ulead Power Producer or any editing movie that you have like Windows movie maker, nero movier maker etc.. i prefer to use Ulead because its so easy to use
• after uploading and editing your videos using ULEAD save it on any various types of videos that you like. you should see it after you want to save it.
• burn your videos on NERO software

Hope you understand my procedures. Good Luck!

thank you for using fixya
CHARCOIS