Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

Kodak easyshare 5300

My printer only wants to print black and pink i tried cleaning the printheads but to no avail. i've bought new ink cartridges but still have the same problem and i have not had this printer for less than a year now. please help me solve the problem.

Posted by on

  • sweetie658 Nov 16, 2008

    THANKS ANYWAY

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Try to remove and install again the ink cartridges and after that perform printhead cleaning again if still prints the same call kodak aio hotline 1 800 421 6699 you might need a replacement printhead..

Posted on Nov 16, 2008

5 Suggested Answers

  • 30 Answers

SOURCE: Kodak EASYSHARE 5300....Problem:

You guys are putting the printhead/ink tanks in wrong. Please refer to your users manual on how to install the printhead.

Posted on Feb 08, 2008

  • 1 Answer

SOURCE: How do you remove the printhead of a Kodak EasyShare 5300 printer?

I have tried what is suggested , I am not getting anywhere with this. I wasn't able to move my finger to the left of anything. What am I doing wrong!

TY
LindaPNY

Posted on Sep 22, 2008

  • 295 Answers

SOURCE: Just installed new printhead and new black and

When you install new printhead in the printer, you will get a message" New printhead detected ,load papers in paper tray and press start. If u do not get this message,that means you have not installed printhead properly. Visit www.kodak.com/go/printheadsupport and click on 3 rd link installing or replacing a printhead to see how to install printhead correctly

Posted on Dec 03, 2009

Testimonial: "Thank you for speedy reply. I will try your solution.RAU"

  • 9 Answers

SOURCE: Printer Kodak Easyshare 5300 Will not print black ink

just remove the head printer and wash with warm water and lett.t dry and replace.t

Posted on Jan 20, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

We cannot get out printer to print. easyshare


we replaced printhead and it wants us to calibrate and replace ink color ink cartridge, and before we put the printhead in , it had 1/2 full color in cartridge

Jan 10, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

3 Answers

My KodakEasy Share 5300 will not print in black.


92b8b47.jpgThe Kodak AiO printers 5000 series and ESP series PRINTHEADs has orange protective cap that need to be remove to fit on the printer carriage. For the ink cartridges 7b91cbc.jpgthere is also a orange protective cap.
Issue that its not printing black and deep clean and removing the printhead and reinstalling the printhead (reseating printhead) is already done and still no black when printing. The printhead should be replace. For futher assistance call 1 800 421 6699 Kodak AiO printer support line

Nov 16, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Blue pics on kodak 5300


Kindly reseat the cartridges 2 times and then close the access door .Click on Menu on the printer and scroll down and choose Clean printhead and select "deep cleaning"
Print a demo sheet after the cleaning process has been completed. If ur issue persists, Call Kodak @ 1800 421 6699 and they will replace printhead of the printer free of cost..
Printhead is the part which takes the ink out from the cartridges. Probably the printhead of the printer has gone bad.

Nov 14, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

Kodak Easyshare 5300 printer will not print black


Print a self test diagnostic page to check the status of the black ink and print heads.

To print the self-test diagnostic page

Control panel: Press (Configuration Page button), or press and hold the (Cancel button) for 3 seconds.

For models that support networks: Press (Configuration Page button).

If these are all showing OK then clean the printheads

To clean the printheads
If printed characters are incomplete, or dots or lines are missing from printouts, ink nozzles might be clogged and you might need to clean the printheads.

NOTE: Cleaning uses ink, so clean the printheads only when necessary.

The cleaning process takes up to 3.5 minutes. Some noise might be generated in the process.
Control panel: Press and hold (Power button), press (Cancel button) two times, press (Resume button) one time, and release (Power button).

If this fails then replace the black cartridge and run a clean cycle again and then a self test diagnostic then try printing again.

Sep 27, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My 5300 printer won't print black ink. I just


Replace the printhead. call kodak at 1.800.421.6699 for a free new one, with FREE ink, too.

Jun 29, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Black ink cartridge


You all need a new printhead. If the eyes on the demo sheet (copy and photo at the same time) are coming out all white and they look like zombies the black text isn't working properly. Try cleaning the printhead. If that doesn't work, call kodak, you need a new printhead.

Sep 26, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Printer does not make black copies, it will print colored copies but not black kodak 5300 aio printer will not print in black. ink cartridge new.


Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Aug 26, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Black ink non-printing


Here are the things you will be asked to try if you call support. They may fix the problems as well. Taking the printhead out and putting it back in is the big helper.

Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
(If this is a 5100, do it in the home center ->? in the top right ->Maintainence ->Clean Printhead.)
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Aug 11, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Poor colour also missing small txt


Remove the black and color ink cartridges.
Right above where the black ink cartridge was, in the top left hand corner of the printhead, push up towards the ceiling and you should be able to push a button that releases the printhead.
Place the printhead right back into the printer and push straight back on the back wall.
You should hear a loud snap.
Replace the ink cartridges which should snap as well.
Close the printer.
After about a minute or so the printer will ask you to do a calibration.
Insert a paper and press start.
Scan the calibration sheet.
After that, in the menu, do a printhead clean.
Do one basic and one deep.
Print a demo sheet to see if anything has changed.
If the picture looks better, continue to do cleans.
In the event that it does not, the printhead will need to be replaced and since the printer is still under warranty, Kodak specialists will try to overnight you a printhead.
The whole process is short and free.
The number for Kodak AiO Support is 1 800 421 6699.

Jul 20, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...