Question about Garden

1 Answer

BROKEN SPRING A spring broke on my lawn tractor. It is a yardman model 13AG601H729 When this happened I lost the accelerator pedal. I since found that the belt has slipped off the pulley, which I have fixed. I do have drive pedal for forward and reverse, but I still do not know where this spring goes. I went to the dealer and ordered a new spring. When the spring broke it was still attached to a pin, but I do not know where the other end of this spring goes? This pin is bolted to the frame and has the range to attach to pulleys under the mower, but where???? Can you help?

Posted by on

  • chris killeen
    chris killeen May 11, 2010


    can you identify the spring from this?

  • Anonymous Mar 13, 2014

    Blade drive-belt has come off...how do I put it back on? It is easy to slip round the two rear "hub things it goes on but the front third one has two steel pins down either side(immobile) Do I put the belt in behind these pins and onto the hub? Doreen (75!!!!)

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Hi, check under your seat. at the frame there should be a bracket that the rod and spring goes thru and right to the pedal.

Posted on Nov 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tractor won't start new battery John Deere 4400 does not even turn over


The tractor has a neutral safety switch ,be sure you are in neutral or park , be sure pto is disengaged has a safety switch on pto . Has a operator present switch under seat cushion that is activated when setting in the seat. All these work together to complete circuit to engage starter. Check it out

Jan 10, 2017 | John Deere Garden

1 Answer

I have recently purchased a ford 1510 tractor with a 3 cylinder diesel. It seems to have low power and rough idle problem. Middle cylinder seems to not be firing because when i crack open fuel line to...


Hello, I'm not very familiar w/ your model but it could be a
timing problem, the fuel is not being injected at the right time
to fire. On a older J.D.such as the 820 ect. would not inject at the right time, there is a place on the injector pump that corrects it, however, I would call a ford tractor dealer, or go online to www.tractornet.com
and list your problem. There are many people on this site that can and will help you. Good luck.

Jul 11, 2014 | Garden

1 Answer

When to prune rose bushes


In the spring, whenever you see Forsythia blooming if you don't have forsythia look for the bumps in the canes and when this ones turn reddish and swell.

Jun 09, 2014 | Garden

1 Answer

Tractor blew white smoke started to sputter


Water getting inside of engine.

May 22, 2014 | Garden

1 Answer

Need year of tractor


we will need the make and model of the tractor to help you here

Apr 02, 2014 | Garden

1 Answer

Rear break wont actuate with foot petal, have replaced all parts and have bleed very often


whats the year make and model of what i am assuming it a vehicle (why its in lawn and garden i have no idea) and is it disc rear or drum and it might have to be pumped quite a few time before it will work you should only have to bleed the brakes once in a great while and it might need bleeding in the ABS module too but i can't give you a certian answer untill i have more information

Sep 19, 2013 | Garden

1 Answer

Install Plow on Sears tractor


Going with the garden tractor, I have one. The cutting deck should be removed primarily because the deck could drag on snow. Some of the pivot points for the blade go where the mow deck mounts. There can be an additional fixture to mount on the body of the tractor frame to operate the lift for the blade. There can be additional brackets to support the blade and offer a 4 point mounting system.

Dec 03, 2012 | Garden

1 Answer

We can't find the place where the governor goes on a Craftsman lawn mower model 944


You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to factory installed systems not add on aftermarket systems.
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

Oct 23, 2012 | Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Dennis Key
Dennis Key

Level 3 Expert

2458 Answers

john h

Level 3 Expert

7409 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...