Question about Cisco 2106 (AIR-WLC2106-K9)

1 Answer

Cisco 2106 does not recognize a 1250

Hello,
i have been attempting to connect a 1250ap to the 2106 without sucess. i am unsure what to do at this point and would appreciate some pointers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Is portfast enabled on the port? ;-)

Posted on Feb 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is default IP of CISCO WAP4410N WIRELESS ROUTER


Hello Anonymous,

The default IP address for the router you are asking about is 192.168.1.245.

The user manual direct from Cisco can be found at the link below.
http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdf

24606349-ploq43q5ggricewjpqkykky4-5-0.png
Take care and have a wonderful night! -Alex K

Jun 10, 2014 | Linksys Cisco Small Business WAP4410N...

Tip

Cisco Wireless, Access to Information and Resources in Wireless Networks


Cisco wireless solutions ensure that your business is able to react to the constant demands of the fast moving global economy. And the Cisco Unified Wireless Network helps enable the Borderless Mobility Experience with a broad portfolio of products that provide anywhere, anytime access to information with the same quality of experience provided by a wired network.<br /><br />For every Cisco fans, they are familiar with all the <a href="http://www.router-switch.com/Price-cisco-wireless-ap_c5">Cisco wireless products</a>, such as <a href="http://www.router-switch.com/Price-cisco-wireless-ap_c5">Access Point</a>, Client Adapters and Client Software, Antennas, Wireless LAN Controller, Wireless Integrated Switches and Routers, Wireless LAN Management, Outdoor Wireless, Mobile Wireless, Service Control for Mobile Networks, Wireless IP Telephony, etc. <br /><br />Firstly, let's get some questions that were asked by people who used Cisco wireless products<br />"I need drivers, and help on how to set up a Cisco Wireless Adapter? I have a Cisco Aironet 802.11a/b/g Wireless CardBus Adapter that I am unsure on how to set up. I can't find drivers for it on the cisco website, or anywhere on the web. If anyone could link me to the drivers and tell me how to set it up that would be great!"<br /><br />"How do I enable the wireless in a Cisco Aironet access point? This is 1200 series Cisco systems AP which is shipped with the wireless disabled, I have only laptop at my disposal. I have tried to communicate with it using it's supplied ethernet cable but either my laptop does not see it or it does not respond. I have the small hand book that comes with it so I do know all the default settings."<br /><br />"Where can I get coupons for Linksys by Cisco Wireless-N Broadband Router? Where can I find a discount online for Linksys by Cisco Wireless-N Broadband Router?"<br />...<br /><br />No matter what Cisco wireless products you have, many people will be confused with how to use it. So we can learn some basic features of Cisco wireless items to help you know it well.<br /><br />Take Cisco Wireless Access Point as a typical example, Cisco Aironet access points and bridges connect wireless devices to networks, providing ubiquitous network access for indoor and outdoor environments. Cisco's next-generation wireless solutions offer comprehensive wireless coverage with up to nine times the throughput of 802.11a/b/g networks. Cisco enterprise wireless mesh helps enable cost-effective, scalable deployment of highly secure indoor and outdoor wireless LANs.<br /><br />Overview on some popular Cisco wireless Products<br />Cisco Aironet 1250 Series Wireless Access Points built on a robust modular platform designed for easy field upgrades, facilitating support of a variety of wireless capabilities<br />including data rates of 300Mbps per radio while providing reliable and predictable WLAN coverage.<br /> <br /><br />Cisco Aironet 1140 Series Draft N Access Points give six times the performance of 802.11a/g networks for reliable connections to Wi-Fi voice, streaming video, and business applications. Cisco Aironet 1140 Series indoor access points have a sleek design that blends into enterprise environments, and they can be powered with standard 802.3af Power over Ethernet.<br /> <br /><br /><a href="http://www.router-switch.com/Price-cisco-wireless-ap-1250-series-access-point_c55">Cisco Wireless LAN Controllers</a> (Standalone and Modules), simplify the deployment and operation of wireless networks, ensuring smooth performance, enhanced security, and maximum network availability. Cisco wireless LAN controllers communicate with Cisco Aironet access points over any Layer 2 or Layer 3 infrastructure and support 802.11a/b/g and the IEEE 802.11n draft 2.0 standard.<br /> <br /><br />Notes: More info such as price, purchasing info, feature details and specs of Cisco wireless products you can visit routerswitch.com---<span>Cisco Wireless</span>, or go to Cisco's official site see more wireless solutions and services. <br />

on Jul 19, 2011 | Wireless Access Points

1 Answer

Unable to browse to cisco access point


'192.168.0.116' is the wrong range for the router. The Cisco manager allocates the ranges the router will use.
See this page on the setup.

Getting Started Guide Cisco 3700 Series Access Points

May 28, 2014 | Cisco Wireless Access Points

1 Answer

I need my security code for my linksys e1200 router,how can i find it


Hello download the user manual here:

http://homesupport.cisco.com/en-apac/support/routers/E1200

Select the version number.
It`s printed in on the product.

You need adobe reader to read the content.

Good luck

Nov 24, 2012 | Cisco Wireless Access Points

1 Answer

How do i reset a 1231 to factory defaults


Unplug the AP then hold in the mode button (use a paper clip or pen tip). While still holding the button down plug the device back in and wait for the light(s) to go steady red. If your AP has a console port you should be good to go..if you have to telnet or use the GUI then the set your computer to 10.0.0.X and create an Adhoc network to gain access to the CLI/GUI.

Jul 26, 2010 | Cisco 2106 (AIR-WLC2106-K9)

2 Answers

How to use hyperterminal


Run HyperTerminal in Windows by going to Start > Programs > Accessories > Communications > HyperTerminal.
After clicking on the HyperTerminal icon, you will see this window:
hyperterminal_1_small.jpg
HyperTerminal prompts you to create a new connection. Note that this is not required but let’s go ahead and do it.

Type in the word cisco for the connection name and click OK.
Connect your Cisco device to your PC’s COM1 port but don’t turn it on yet. On the next window that appears, make sure that the “Connect Using” field says COM1 and click OK.
hyperterminal_2_small.jpg
On the next window, change the Baud rate to 9600 and click OK.
hyperterminal_3_small.jpg
Now, turn on your Cisco device. In the HyperTerminal window, you should see the boot up process for your device, like this:
hyperterminal_4_small.jpg
//'); //]]> document.write(''); CollectiveMedia.createAndAttachAd("ns-74737014_1271195234","http://ad.doubleclick.net/adj/ns.petri/archive;net=ns;u=,ns-74737014_1271195234,11286e7f1d8af7d,ce_mobile_blackberry,;;kw=;tile=2;ord1=504214;sz=300x250,336x280;ppos=BTF;contx=ce_mobile_blackberry;btg=;ord=3760843785557546?","300","250,336",false); archive;ppos=btf;kw=;tile=2;sz=300x250,336x280;ord=123456789??\ You have successfully configured HyperTerminal and connected to your Cisco device.
When you are done and try to close out HyperTerminal, you will be asked if you want to save this connection. I suggest saving it with the name you gave it, cisco, so that you don’t have to configure it again next time.

Apr 13, 2010 | Cisco Aironet 1142 (AIR-LAP1142N-A-K9)...

1 Answer

How to reset c2106 to factory defaults?


do you have a little button behind it ?if you do tap it for 20 seconds.

Feb 23, 2010 | Cisco 2106 (AIR-WLC2106-K9)

1 Answer

Hello! My laptop is not able to connect to my Linksys router.


Make sure that your wireless is not secure or you are entering the right password. Also check to see what channel that your wireless is set on and compare that to your neighbors around you. If you and your neighbor have the same channel number set that is your problem. Your neighbor is over powering your own router.

Dec 16, 2009 | Linksys Wireless-G WAP54G 802.11g/b...

1 Answer

Wet54g will propperly communicate to a cisco 1310


make sure you switch anything that says 'proprietary', or is just not standard 54g with the wireless settings.

Some manufacturers will put in auto-discovery services that only that same manufacturer of wireless access point will understand, this can sometimes cause problems for bridge communication.

Mar 20, 2009 | Linksys Wireless-G WET54G 802.11g/b...

1 Answer

Is it possible to implement Natting on Cisco WLC 2106


I suggest you to read this, that woult explain all of it for you.

Dec 29, 2008 | Cisco 2106 (AIR-WLC2106-K9)

Not finding what you are looking for?

Open Questions:

0 Answers

Enter User Name (or 'Recover-Config' this one-time only to reset configuration t o factory defaults) User: Warning! Software watchdog on task pemReceiveTask expired, raise its prior ity! 1557 - TaskID 154205984 ('pemReceiveTask') osapi_prio 240 old_prio 240 pthread_prio 7 cur_prio 7 tickleTimer 0 1589 - TaskID 154205984 ('pemReceiveTask') osapi_prio 45 old_prio 240 pthread_prio 81 cur_prio 81 Error! Software watchdog on task pemReceiveTask expired! Reaper Reset: Task "pemReceiveTask" missed software watchdogReaper is kickin' in to high gear Task pemReceiveTask is consuming 0% CPU! (0% user, 0% system) 1557 - TaskID 154205984 ('pemReceiveTask') osapi_prio 45 old_prio 240 pthread_prio 81 cur_prio 81 tickleTimer 0 1589 - TaskID 154205984 ('pemReceiveTask') osapi_prio 240 old_prio 240 pthread_prio 7 cur_prio 7 Task pemReceiveTask is consuming 0% (0% user, 0% system) Stackdump from pemReceiveTask Frame 0: 0x08051d72: sighup_handler+42 Frame 1: 0x4018608c: ssh_ldap_client_enable_tls+932996688 Frame 2: 0x401bf950: ssh_ldap_client_enable_tls+933232404 Frame 3: 0x0825f9f9: hapiBroffuSendIoctl+613 Frame 4: 0x08250fae: dapiCtl+1106 Frame 5: 0x081baf2e: dtlBsnFdbMacAddrDelete+278 Frame 6: 0x082cc129: pemDelScb+269 Frame 7: 0x082cc7d9: pemReceiveTaskEntry+301 Frame 8: 0x081f8ffd: osapiErrnoGet+405 Frame 9: 0x40183040: ssh_ldap_client_enable_tls+932984324 Frame 10: 0x40262cfa: ssh_ldap_client_enable_tls+933900990 ************************************************************ * Start Cisco Crash Handler * ************************************************************ Version: 4.0.217.0 Timestamp: Fri Oct 15 22:39:33 2010 pid: 141 TID: 37925 Task Name: pemReceiveTask Reason: Reaper Reset timer tcb: 0xd timer cb: 0x814b9c0 ('rrmSendTimerMsg+224') timer arg1: 0xac3269c timer arg2: 0x0 ------------------------------------------------------------ Analysis of Failure: Software was stopped by the reaper for the following reason: Reaper Reset: Task "pemReceiveTask" missed software watchdog ------------------------------------------------------------ System Stack Frame 0: 0x08051d72: sighup_handler+42 Frame 1: 0x4018608c: ssh_ldap_client_enable_tls+932996688 Frame 2: 0x401bf950: ssh_ldap_client_enable_tls+933232404 Frame 3: 0x0825f9f9: hapiBroffuSendIoctl+613 Frame 4: 0x08250fae: dapiCtl+1106 Frame 5: 0x081baf2e: dtlBsnFdbMacAddrDelete+278 Frame 6: 0x082cc129: pemDelScb+269 Frame 7: 0x082cc7d9: pemReceiveTaskEntry+301 Frame 8: 0x081f8ffd: osapiErrnoGet+405 Frame 9: 0x40183040: ssh_ldap_client_enable_tls+932984324 Frame 10: 0x40262cfa: ssh_ldap_client_enable_tls+933900990 ------------------------------------------------------------ Stacks from all busy tasks Task pemReceiveTask is consuming 0% (0% user, 0% system) Stackdump from pemReceiveTask Frame 0: 0x08051d72: sighup_handler+42 Frame 1: 0x4018608c: ssh_ldap_client_enable_tls+932996688 Frame 2: 0x401bf950: ssh_ldap_client_enable_tls+933232404 Frame 3: 0x0825f9f9: hapiBroffuSendIoctl+613 Frame 4: 0x08250fae: dapiCtl+1106 Frame 5: 0x081baf2e: dtlBsnFdbMacAddrDelete+278 Frame 6: 0x082cc129: pemDelScb+269 Frame 7: 0x082cc7d9: pemReceiveTaskEntry+301 Frame 8: 0x081f8ffd: osapiErrnoGet+405 Frame 9: 0x40183040: ssh_ldap_client_enable_tls+932984324 Frame 10: 0x40262cfa: ssh_ldap_client_enable_tls+933900990 ------------------------------------------------------------ Semaphore and Mutex Usage Mutex 'sshpmTftpRuleSemaphorePtr' @ 0xaa33f1c Created fp_main_task(sshpm.c:3 66) Locked by sshpmReceiveTask(sshpmrecv.c:958) 0 tasks waiting for resource. Stackdump from sshpmReceiveTask Frame 0: 0x08051d72: sighup_handler+42 Frame 1: 0x4018608c: ssh_ldap_client_enable_tls+932996688 Frame 2: 0x401bf950: ssh_ldap_client_enable_tls+933232404 Frame 3: 0x401858cd: ssh_ldap_client_enable_tls+932994705 Frame 4: 0x401820a9: ssh_ldap_client_enable_tls+932980333 Frame 5: 0x0857db0e: d_async_queue_pop+58 Frame 6: 0x081f5bc4: osapiMessageReceive+32 Frame 7: 0x0819d444: sshpmReceiveTaskEntry+644 Frame 8: 0x081f8ffd: osapiErrnoGet+405 Frame 9: 0x40183040: ssh_ldap_client_enable_tls+932984324 Frame 10: 0x40262cfa: ssh_ldap_client_enable_tls+933900990 ------------------------------------------------------------ Memory Information System Memory Information: Total System Memory: 256724992 bytes (244.84 Mb) Used System Memory: 108687360 bytes (103.65 Mb) Free System Memory: 148037632 bytes (141.18 Mb) Heap information: Bytes alloced from RTOS: 2598316 bytes (2.47 Mb) Chunks free: 14 bytes Number of mmapped regions: 21 Total space in mmapped regions: 17801216 bytes (16.97 Mb) Total allocated space: 2565284 bytes (2.44 Mb) Total non-inuse space: 33032 bytes (32.25 Kb) Top-most, releasable space: 22568 bytes (22.03 Kb) Total allocated (incl mmap): 20399532 bytes (19.45 Mb) Total used (incl mmap): 20366500 bytes (19.42 Mb) Total free (incl mmap): 33032 bytes (32.25 Kb) Buffer Pooled Malloc Usage Pool[00]: 16 byte chunks chunks in pool: 800 chunks in use: 653 bytes in use: 10448 bytes requested: 7022 (3426 overhead bytes) Pool[01]: 64 byte chunks chunks in pool: 700 chunks in use: 560 bytes in use: 35840 bytes requested: 17042 (18798 overhead bytes) Pool[02]: 128 byte chunks chunks in pool: 900 chunks in use: 821 bytes in use: 105088 bytes requested: 61879 (43209 overhead bytes) Pool[03]: 256 byte chunks chunks in pool: 200 chunks in use: 89 bytes in use: 22784 bytes requested: 16261 (6523 overhead bytes) Pool[04]: 1024 byte chunks chunks in pool: 300 chunks in use: 242 bytes in use: 247808 bytes requested: 95855 (151953 overhead bytes) Pool[05]: 2048 byte chunks chunks in pool: 100 chunks in use: 33 bytes in use: 67584 bytes requested: 38852 (28732 overhead bytes) Pool[06]: 4096 byte chunks chunks in pool: 50 chunks in use: 38 bytes in use: 155648 bytes requested: 110254 (45394 overhead bytes) Max number of Mbufs: 1536 number of Mbufs Free: 1531 number of Mbufs In Use: 5 ------------------------------------------------------------ Interrupt Status Name Total Interupts PerSecond 0: Misc 90153 100 4: q 208 0 7: q 7 0 11: q 26247 30 14: q 2092 0 ------------------------------------------------------------ Message Logs Fri Oct 15 22:29:22 2010 [ERROR] spam_lrad.c 13270: Unable to send Delete-Mobil e request to unknown AP 00:1e:7a:70:2e:d0 Fri Oct 15 22:29:04 2010 [ERROR] spam_tmr.c 565: Did not receive hearbeat reply from AP 00:1e:7a:a8:5f:d0 Fri Oct 15 22:29:03 2010 [ERROR] spam_tmr.c 565: Did not receive hearbeat reply from AP 00:1f:9e:80:e1:90 Fri Oct 15 22:29:02 2010 [ERROR] spam_tmr.c 565: Did not receive hearbeat reply from AP 00:1e:7a:70:2e:d0 Fri Oct 15 22:26:34 2010 [ERROR] spam_lrad.c 1897: AP 00:1e:7a:a8:5f:d0 associa ted. Last AP failure was due to Link Failure, reason: ECHO_REQUEST Fri Oct 15 22:25:38 2010 [ERROR] apf_utils.c 193: Missing Supported Rate. Fri Oct 15 22:25:34 2010 [ERROR] spam_lrad.c 1897: AP 00:1f:9e:80:e1:90 associa ted. Last AP failure was due to Link Failure, reason: ECHO_REQUEST Fri Oct 15 22:25:33 2010 [ERROR] spam_lrad.c 1897: AP 00:1e:7a:70:2e:d0 associa ted. Last AP failure was due to Link Failure, reason: ECHO_REQUEST Fri Oct 15 22:25:14 2010 [ERROR] sshpmrules.c 3053: SSHPM: attempting to enable secure shell access when already enabled. Fri Oct 15 22:25:14 2010 Previous message occurred 3 times Fri Oct 15 22:25:11 2010 [ERROR] dtl_data.c 258: dtl_data.c 258: In dtlDataLowT ask_rxBroffPkt call to 'dtlPduReceive' failed Fri Oct 15 22:25:11 2010 [ERROR] dtl_data.c 258: dtl_data.c 258: In dtlDataLowT ask_rxBroffPkt call to 'dtlPduReceive' failed Fri Oct 15 22:25:11 2010 Previous message occurred 2 times Fri Oct 15 22:25:03 2010 [ERROR] sim_util.c 1581: Unable to set uranium QOS Pro file ACM Fri Oct 15 22:25:03 2010 [ERROR] sim_util.c 1588: Unable to set platinum QOS Pr ofile ACM Fri Oct 15 22:25:03 2010 [ERROR] sim_util.c 1581: Unable to set platinum QOS Pr ofile ACM Fri Oct 15 22:25:03 2010 Previous message occurred 2 times Fri Oct 15 22:25:03 2010 [ERROR] sim_util.c 1581: Unable to set gold QOS Profil e ACM Fri Oct 15 22:25:03 2010 [ERROR] sim_util.c 1588: Unable to set bronze QOS Prof ile ACM Fri Oct 15 22:25:03 2010 [ERROR] sim_util.c 1581: Unable to set bronze QOS Prof ile ACM Fri Oct 15 22:25:03 2010 Previous message occurred 2 times Fri Oct 15 22:25:03 2010 [ERROR] sim_util.c 1581: Unable to set silver QOS Prof ile ACM Fri Oct 15 22:25:03 2010 [CRITICAL] timerlib.c 442: Task 154182432 unable to ac quire timer lock. Fri Oct 15 22:25:03 2010 [CRITICAL] osapi_sem.c 777: osapiBsnTimerCreate() @ ti merlib.c:442: ERROR: 'timerSema' is a NULL pointer. Fri Oct 15 22:25:02 2010 [CRITICAL] timerlib.c 442: Task 154182432 unable to ac quire timer lock. Fri Oct 15 22:25:02 2010 [CRITICAL] osapi_sem.c 777: osapiBsnTimerCreate() @ ti merlib.c:442: ERROR: 'timerSema' is a NULL pointer. Fri Oct 15 22:25:02 2010 [CRITICAL] bootos.c 836: Starting code... ************************************************************ * End Cisco Crash Handler * ************************************************************ Cisco Crash Handler This build was configured to copy this crash information to a file called: "/mnt/application/mwar_dump1.crash" CISCO SYSTEMS Embedded BIOS Version 1.0(12)6 08/21/06 17:26:53.43 Low Memory: 632 KB High Memory: 251 MB PCI Device Table. Bus Dev Func VendID DevID Class Irq 00 01 00 1022 2080 Host Bridge 00 01 02 1022 2082 Chipset En/Decrypt 11 00 0C 00 1148 4320 Ethernet 11 00 0D 00 177D 0003 Network En/Decrypt 10 00 0F 00 1022 2090 ISA Bridge 00 0F 02 1022 2092 IDE Controller 00 0F 03 1022 2093 Audio 10 00 0F 04 1022 2094 Serial Bus 9 00 0F 05 1022 2095 Serial Bus 9 Evaluating BIOS Options ... Launch BIOS Extension to setup ROMMON Cisco Systems ROMMON Version (1.0(12)7) #2: Fri Oct 13 10:52:36 MDT 2006 Platform AIR-WLC2106-K9 Launching BootLoader... Cisco Bootloader (Version 4.0.191.0) .o88b. d888888b .d8888. .o88b. .d88b. d8P Y8 `88' 88' YP d8P Y8 .8P Y8. 8P 88 `8bo. 8P 88 88 8b 88 `Y8b. 8b 88 88 Y8b d8 .88. db 8D Y8b d8 `8b d8' `Y88P' Y888888P `8888Y' `Y88P' `Y88P' Booting Primary Image... Press <ESC> now for additional boot options... Detecting hardware . . . . Cisco is a trademark of Cisco Systems, Inc. Software Copyright Cisco Systems, Inc. All rights reserved. Cisco AireOS Version 4.0.217.0 Initializing OS Services: ok Initializing Serial Services: ok Initializing Network Services: ok Starting ARP Services: ok Starting Trap Manager: ok Starting Network Interface Management Services: ok Starting System Services: ok Starting Fast Path Hardware Acceleration: ok Starting Switching Services: ok Starting QoS Services: ok Starting FIPS Features: Not enabled Starting Policy Manager: ok Starting Data Transport Link Layer: ok Starting Access Control List Services: ok Starting System Interfaces: ok Starting Management Frame Protection: ok Starting LWAPP: ok Starting Crypto Accelerator: Not Present Starting Certificate Database: ok Starting VPN Services: ok Starting Security Services: ok Starting Policy Manager: ok Starting Authentication Engine: ok Starting Mobility Management: ok Starting Virtual AP Services: ok Starting AireWave Director: ok Starting Network Time Services: ok Starting Cisco Discovery Protocol: ok Starting Broadcast Services: ok Starting Power Over Ethernet Services: ok Starting Logging Services: ok Starting DHCP Server: ok Starting IDS Signature Manager: ok Starting RFID Tag Tracking: ok starting TSM: ok Starting CIDS Services: ok Starting Ethernet-over-IP: ok Starting Management Services: Web Server: ok CLI: ok Secure Web: ok (Cisco Controller) Enter User Name (or 'Recover-Config' this one-time only to reset configuration t o factory defaults)

Oct 16, 2010 | Cisco 2106 (AIR-WLC2106-K9)

Cisco  2106 (AIR-WLC2106-K9) Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Wireless Access Points Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

Imre Vetro

Level 2 Expert

70 Answers

Are you a Cisco Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...