1st Independant Projector Service Center in Singapore
Check out this Company: V3 Systems & Services P/L
Block 4010, TECHplace 1,
Ang Mo Kio Ave 10, #03-06,
Contact: Mr Christopher Yew / Mr Jazz Cheong
Email: firstname.lastname@example.org / email@example.com
Finally, We dont have to rely on manufacturer on Projector repair/service.
NO more Paying ridiculous price!
NO more Paying diagnosis FEEs!
NO more waiting for weeks.....to get back projector!
And best of all, FREE backup projector.
3 to 5 days, projector back in working condition like new!!!!
Charges for repairs $300 -----$500
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if the Lamp error and Temperature error lights are flashing red this means that there are two separate errors.
flashing lamp light means the lamp failed to ignite. It could be a lamp
driver problem or lamp failure. Replace the lamp to resolve the issue.
If the issue is not resolved, then service the projector.
A flashing Temperature light signals a fan error. Turn the projector
off and allow it to cool down. If the light is still flashing after the
projector is turned back on, service the projector.
Look at the manual page 34, for the indicator messages. I suspect it's the same problem I have (which I haven't had formally diagnosed yet!), which I believe is a defective fan. My projector had been making a really loud noise on startup, which varied in length and volume. Recently the projector has taken to turning itself off after being on for about a minute, and the power light flashes green, with the temp and lamp lights flashing red.
Lamp is burned out or makes a popping sound. When the lamp reaches its end of life, it may burn out and may make a loud popping sound. If this occurs, the projector does not turn back on. To replace the lamp, see on page 38. LAMP light is solid amber If the LAMP light is solid amber, replace the lamp. LAMP light is blinking amber If the LAMP light and the Power light are blinking amber, the lamp driver has failed and the projector will automatically shut down. If the LAMP light is blinking amber and Power light is solid blue, the color wheel has failed and the projector will automatically shut down. Unplug the power cord after 3minutes then turn the display on again. If this problem persists, contact Dell™. TEMP light is solid amber The projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell™. TEMP light is blinking amber A projector fan has failed and the projector will automatically shut down. If the problem persists, contact Dell™.
I wish you had received a relevant answer to your question, as I'm experiencing exactly the same thing here. Not sure is this site notifies people when they get responses, but did you ever figure out what the problem was?
clean out the projector with canned air. the dust is keeping in the heat and the lamp can't cool down. check the fans, too. check the lamp timer. if it's close to 2000 hours, replace the lamp and reset the timer.