Question about RCA P52930BL 52" Rear Projection Television

1 Answer

P52930bl RCA Projection 52" Remote problem

The remote stoped working today and i tried reseting the rca remote i had and i had no luck getting it to work. Thinking that the remote was broken i went and bought a new universal remote. (identical to the origanal i had) And i can't get this to work either. I think that there may be a problem with the Tv's reciever, but i don't ever know were the receiver is on this tv. If anyone knows about this, i would greatly apprecate any input.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

First thing you want to do with this set would be to unplug it for at least a 24 hour period. if that does not work, the remote sebsor could be defective. if you want to just replace the sensor and not trouble shoot the set, it should be located behind a plasit cover in the front of the set, or located inside the reflection area of the TV set. Differant models are located at differant positions. If you have no electronic experience, play it safe and call in a trained tech to assist you in this repair. Good Luck Please do not forget to rate this thread.

Posted on Dec 15, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace a convergence power supply on an rca 52 inch projection tv


The convergence power supply is the small narrow board which is held in place with a couple of screws. I am attaching a pic of the board yours may be slightly different 8_9_2012_4_22_22_pm.jpg

Aug 09, 2012 | RCA P52930BL 52" Rear Projection...

1 Answer

My Rca 52" projection hdtv


There is a button on your remote to adjust the aspect ratio, I.E. "16:9", "4:3" Try finding the button on your remote or go into the picture settings in the menu.

Jun 07, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

I have an RCA 52 " projection TV thats now 6 years


you have to run theater system eather through your vcr or your dvd player for mor out put jacks and input jacks on older tvs but the thing is your dvd player remote will be your tv remote the same as your vcr remote.

Feb 13, 2011 | RCA P52937 52" Rear Projection Television

1 Answer

Remote won't operate RCA rear projection TV. Bought new RCA remote, and still won't work.


try turning off energy saving lamps. The light given off from them will intefere with the remote.

Feb 01, 2010 | RCA P52830BL 52" Rear Projection...

1 Answer

How do u fix the security on a 52" RCA HDTV Monitor


You will need to reset your v-chip, refer to your manual for exact instructions if you do not know the code, or call RCA to get it reset.

Jul 15, 2009 | RCA P52930BL 52" Rear Projection...

2 Answers

RCA D52W20 REMOTE CONTROL


Go to REMOTES.COM and order a new factory remote. Or call RCA or a service center and they can get you one.

Jun 09, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

My TV turns itself off and on by itself.


You have a timer that has been accidently set by someone by the remote control.
If you have an instruction amnual for the tv, it will tell you how to turn off the tv's timer.

Feb 13, 2008 | RCA P52930BL 52" Rear Projection...

1 Answer

RCA 52" Rear Projection P52930BL


You can adj. from the front panel of the set using the channel and vol. buttons,if the set you have has a ptk 195 chassis,check and make sure you have adj. projection tv in screens of the menu,in not the convergence power supply has failed,replace the reg on the board,part number is 215530

Oct 04, 2007 | RCA P52930BL 52" Rear Projection...

1 Answer

Blue sreen


check your connections if they are connected properly.have a tech check your tv the problem could be in the video section.good luck.

Apr 19, 2007 | RCA P52930BL 52" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...