I have lost my manual and need to know how to set up the printer again. Could you please advise me how to stop the printer when printing, and also let me have a copy of set up instructions. Thankyou Henry Senior
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try the feed tires in the tray first. More than likely the paper is not being picked up and causing jam message. The separation roller also has a hub on it to prevent a second sheet from feeding. Sometimes these start to lock up ,a little oil on the hub sometimes relieves some of the tension.
http://kyoceramita.com.au/fs720.asp has xp driver for fs-720 attach fs-720; windows 7 will recognise but fail to install click on 'unspecified device fs-720' in devices and printers click to upgrade/install driver use driver specified above (xp) should install properly cheers
Hi Folks, I have just had the same problem with a Kyocera FS-720 that also had the red/orange attention LED staying on permanently after being turned on. Turned out to have an empty toner cartridge. After replacing the toner cartridge, printer is as good as new again.
on photos, If you have a laser printer with half a meg of RAM and you try and print a full page graphic at 300dpi you only get half a page because the printer runs out of RAM.
You can get a full page by printing at 150dpi.
could also be that the encoder strip has become fogged with aerosol, and needs gentle cleaning.