Question about iLO 3200 32 in. LCD Television

1 Answer

Tried connecting DVD player to ILO 27 in, no go

Don't have any paperwork on the TV, bought it a year ago but havnt used it because I moved and had nowhere to set it up. Remote didn't work so got it connected to a Universal remote using Emerson code. Now trying to connect my Emerson DVD player to the TV and nothing happens. Tried plugging the plugs into all the different holes just incase they were miscolored.... The input button on the universal won't change anything so we can watch dvds. The player works.... the TV works.... but how do I make them work together? Any help? I am completely lost!

Much thanks!

Posted by on

  • 2 more comments 
  • missi019330 Nov 14, 2008

    For some reason this posted with something about a 32 inch TV. Just clarifying I have a 27in ILO TV.

  • Anonymous Nov 22, 2008

    i have an ilo tv. it works when im watching tv but when i connect the dvd player, itsays NO SIGNAL

  • Anonymous Dec 04, 2008

    I tried, but there is no "video" on my remote. There is an input button but it doesn't do anything.

  • mphm0251 May 11, 2010

    1. need ower manual


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to video on your remote, then go to composite... it should work on composite mode. Took us a while, don't feel bad. Hope that works for you.

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The input dvd screen says no signal and the DVD player doesn't seem to have any power.

If it is in warranty return it---parts for the DVD unit are not available--they would have to replace the entire DVD unit inside the set.

Mar 12, 2012 | RCA 32LA30RQD TV

2 Answers

Astar 27" TFT LCD TV, Model LTV-2701

go to and enter your model number and purchase a factory replacement

Nov 25, 2007 | Astar LTV-2701 27 in. HD-Ready LCD...

1 Answer

Power Supply Board Problem?

the motor that spins the DVD, locks it magnetically to another free spinning disk... if you got that far, remove the dvd player part, flip it upside down, see if you can manually move some of the gears. you should be able to free the DVD enough to pull it out with the tweezers. if you can send a picture to I might be able to point out what to move.

Dec 04, 2008 | Akai LCT2715 27 in. LCD Television

1 Answer

My ilo tv wont work wright

I do have the same problem on my ILO 26HD It worked fine for about a year and sudenly it got freezed, can anyone please find what it is?? Thanks!!

Aug 14, 2008 | iLO 2600 Television

1 Answer

Green Glow

Suggest that the CRT Purity has gone off

Check that there is nothing magnetic near the set

The CRT may need to be degaussed

Or the degauss circuite is faulty this would require a engineer to look at


Jan 30, 2008 | iLO 2600 Television

1 Answer

Ilo 27" flatscreen

I moved and the manual and remote got lost. I bought a ONE FOR ALL remote that has the iLO printed on the add but I can't get the tv to work, I tried all the codes but nothing worked. How can I get a manual from the computer to work this iLO tv, which I am unable to use. Maybe I should have purchased a Sony.

Sep 30, 2007 | iLO Flat Panel Televisions

1 Answer

Using my universal remote to control my iLo 27" Wide-Screen LCD TV

I have a ILO 27" TV Comcast had no suggestions for programming their remote. I went thru the ENTIRE code book and finally came up with one that worked: Emerson Code #0463 for my COMCAST universal remote.

Jul 14, 2007 | iLO V27DMBX Television

1 Answer

ILO TV - How do I connect VCR/DVD???

I beleive that in the thunderstorm the HDMI port was blown. There are many reports of this happening and many people are having troubles getting it fixed. The return percentage is very high on this TV. You will need to return the TV to Walmart to have them fix the HDMI port or even ask for your money back. Hope this helps.

Jul 09, 2007 | iLO 3200 32 in. LCD Television

1 Answer

No color when watching a DVD

check your dvd if it is not on PAL if it is then switch it back to NTSC.if that does noe work then call tech to look at your dvd.and tv.good luck

Apr 22, 2007 | iLO 3200 32 in. LCD Television

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68258 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Are you an iLO Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides