Question about Hobart HL600 Legacy Stand Mixer

1 Answer

Hobart HL600 Legacy mixer will run on stir speed only.

The electronic speed control board on this machine was replaced with a new one. When tested, it only runs on stir speed at any speed setting.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Check to see if magnet on bowl guard is still in place, it is on the right side.

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have no power out of the hl600 motor control board. whats wrong?


Because of the very high voltage on the output of the Inverter drive, I do not want to be responsible for your injury or death from you servicing this machine without proper training.

Jul 31, 2014 | Hobart HL600 Legacy Stand Mixer

1 Answer

Hook straggles to turn when dough in bowel


The Legacy is an electronic mixer and the transmission does not have any gear, and it frequency convertor that works in phases 2 and 3. If the hook struggling when turns, check the transmission belt locasted at the top of the mixer, remove the cover first.
If the belt is loose, tense it with the screw on the base of the motor or replace the belt. If you can not fix it, let me know and I'll try something else.

Mar 23, 2014 | Hobart HL600 Legacy Stand Mixer

1 Answer

What is error code 99 for a hobart HL 600 mixer?


error 99 stands for communication fault between timer board and the sr drive.there are 5 things that can cause this error.1.rs-485 cable disconnected or malfunction 2.1 con monitordisconnected or malfunction. 3.run/stop wiring disconnected or malfunction. 4.timer board malfunction. 5.sr drive malfunction. hope this helps, dont forget to vote, thanks, monomoy

Jan 29, 2010 | Hobart HL600 Legacy Stand Mixer

1 Answer

Sensor broke off


if it is a hobart call them, give them the info off the name plate and they will mail one to you.

Aug 20, 2009 | Hobart LEGACY® HL600 Stand Mixer

1 Answer

95 year old hobart mixer: two pole single throw switch


Im a tech for hobart and have seen old mixers but not that old.Hobart wont have parts but you could goto an electrical supply place,take the switch and ask them for something universal.

Dec 16, 2008 | Hobart HL600 Legacy Stand Mixer

2 Answers

Hobart mixer


Hi,im a hobart tech and know all these mixers well.What kind of mixer are you looking to write about?The differences are the sizes of bowls as 20qt,30qt,40qt,60,qt,80qt,140qt.Pick a mixer and i will write YOUR paper,but i want a fixya rating in return.

Mar 11, 2008 | Hobart HL600 Legacy Stand Mixer

1 Answer

Hobart hl600 mixer


I know what these codes are: code 19 is that phase c is over current fault and code 23 is a motor stall fault.I would start by making sure you 3 phase wiring going into the mixer is there.I service these mixers as im a service tech for hobart.these units are very detailed and i can walk you thru some things to check but if you have an electrical problem you most likley will have to call a hobart service tech because we have special equipment to diagnose the fault.let me know it may be something simple as these mixers are usally maintenance free.

Nov 14, 2007 | Hobart HL600 Legacy Stand Mixer

Not finding what you are looking for?
Hobart HL600 Legacy Stand Mixer Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1138 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Shira

Level 2 Expert

119 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...