Question about Kyocera Copystar CS-1820 Black and White Copier

1 Answer

Kyocera Copier Password (KM-4050)

Our IT Guy @ our company has left and the password is only left with him. We are trying to create users, but we do not have the default administrator username/password. Any help? Thanks in advanced.

Posted by on

  • hiryu23 Nov 18, 2008

    hey thanks for the help. Can i ask what is the administrator username ? issit admin or administrator?


    Is gg to service mode the only other way to change the administrator password?

    what other problems will i face when gg to service mode besides permanently fail?


  • kaizer Apr 01, 2013

    hi copier kyocera km 4050 is giving me an errror cf040 and i want to upgrade firmware

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 146 Answers

The factory default password should be 4000. If thast doesn't work you will have to reset or display the admin password in service mode.

To enter service mode hit the ststus button and then type 10871087. Scroll through the menu with the * and # keys. If you make changes in service mode and do not know what you are doing you can cause the copier to permanently fail.

Posted on Nov 18, 2008

  • Brian Bell
    Brian Bell Nov 18, 2008

    As far as I know a user name is not required on the operators panel or on the web interface. It should only prompt you for a 4 digit password.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the copy density in Kyocera Km-2050 from the menu button ? Every time i try to do so it asks for password. What is the password?


Hi,After Entering service mode (1087... 1087) you may enter the maintenance item no U 093 .the range is 0-3. Larger the number more density and visa versa

Oct 01, 2014 | Kyocera Km-2050 Black & White Copier

1 Answer

Error cfb30


Try upgrading the latest firmware

Aug 24, 2014 | Kyocera Copystar Fax System M Km-5050...

1 Answer

I have Kyocera Mita KM-2050 Printer/Scanner. The machine has moved networks. I have setup the printing OK but cannot get the scanning to work. I have gone into the panel on the machine & changed the IP...


The NIC card will need to be reset back to the factory defaults if you do not have the user name and password.

If you contact me through www.gfbm.net I will assist you with resetting the scanner over the phone.


Once reset the scanner NIC you will need to re input the IP and all your other scanner information.

I hope this is helpful,
Shawn

Jan 31, 2011 | Kyocera Mita KM-2050 Printer

1 Answer

Set up email on kyocera fs-c2126


I have the instructions posted at http://gfbm.net/selfhelp_kmacopier_scan_to_email_setup_command_center.htm.

They also can be down loaded from http://gfbm.net/Documents/self_help/KM-3050%20KM-4050%20KM-5050%20Scan%20to%20Email%20Basic%20Setup.pdf.

If asked for a password to log into web browser use admin00.

I hope this is helpful,
Shawn

Dec 23, 2010 | Kyocera Copystar CS221 CS221 KVM Switch

2 Answers

KyoceraMita KM-4050: System Board reset for authentication


Login with 5050 as the username and password via the web browser and turn off authentication.

Nov 27, 2009 | Office Equipment & Supplies

2 Answers

KM-1820 scanner setup


The KM-1820 to scan to PC is using SMB, FTP or e-mail.

for SMB:
I am assuming you have the KM-1820 connected within the network and a static IP address for it.
open any Internet browser and go to KM-1820's IP address.
You should see the Command Centre web page.
Go to Basic page and add/register a contact within the Address Book.
Give a name and at the SMB section field, fill up with your computer hostname or the ip address of your computer where you want to scan. Fill up the user name with the local user name - the one what you are using to get into your computer - or create a new LOCAL user for your PC lets say "kyocera". So for SMB will be your computer and username: kyocera. (You will need a password for that computer user (kyocera) ). Then create a folder "scan" where you want ot receive the scanned files and add "scan" at the path field (SMB section of that webpage - command center).
Now share the folder "scan" as "scan".

if you want you can always use the scan to e-mail !! but you need a smtp server. All the settings can be done using that command center webpage.

Dec 08, 2008 | Kyocera Copystar CS-1820 Black and White...

2 Answers

CS-1820 admin password reset.


The master user name is 1118 and password 1118 also. this should give you access to the menus and allow you to do whatever changes you feel like.

May 06, 2008 | Kyocera Copystar CS-1820 Black and White...

Not finding what you are looking for?
Kyocera Copystar CS-1820 Black and White Copier Logo

12,843 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

NewYork kyocera HP...

Level 3 Expert

513 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Tech Bravo
Tech Bravo

Level 2 Expert

337 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...