Question about Cherokee Jeep Grand 6 Disc In-Dash CD Player w/Changer Controls

1 Answer

Removal? after having the battery off, my radio/cd need a code as iv only had the jeep since jan 08 i dont have the code as the garage didnt surply it. how do i remove it to get the serial number off the back? or have you any other surgestions? thanks Julie

Posted by on

  • vmoorefield Mar 27, 2009

    I have a 99 Jeep Grand Cherokee with a factory 6 disk cd changer in the dash. I'm not sure if it's related but around the time I replaced my battery the cd player quit working. My radio still works but I do not have the cd player option when I press my mode button. Is there a code I need and if so does anyone know where I can get it? Thanks:)

  • Anonymous Apr 22, 2009

    I have the same problem. I had some service work done on my 2005 Jeep Grand Cherokee in which they had to disconnect the battery. Once I picked it up, everything worked just fine but now my Mode button and Eject button for the CD player do not work at all! If you guys have found a solution, please let me know, or even if you have ideas to try! Thank you!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

I have not seen a Jeep stereo need a code. Usually, if a code comes up in the display, this is a CD error code. Sometimes, disconnecting one of the main car battery terminals several minutes then reconnecting can act as a reset and bring the changer back to working. Any CD's with added labels will jam the mechanism.

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't use satellite radio,it has reset code 08


Reset code 08 is usually relates to data connection between head unit and the tuner. If there is any other peripheral units between the main unit and the Satellite tuner, check those also. Remove, clean with contact cleaner and reinstall should take care of majority of issues.

Feb 16, 2015 | JVC KW-AVX800 CD Player

1 Answer

Following a flat battery, my cd player won't work.


You dont need a code if your radio is working but your cd isnt. You just need to reset the cd player by finding a little small indent on the face and push it in with a sharp pen, pencil or paper clip. Some reset buttons are also found when you remove the face of the radio. You will notice it when you see a little small round hole. Push it in for at least 2 or 3 secs

Apr 08, 2010 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

I have a sirius ready cd player installed in my jeep. I was wondering how I get sirius radio..when you scroll through Cd,radio, aux , there is sirius so i dont think i need another radio...but i dont know...


Looking at the user manual on page 13, you have to purchase and connect the XMD1000 module to in order to get the satellite radio service. If the module is installed, you'll get a display telling you to sign up for service.

Feb 24, 2010 | Panasonic CQ-C7301U CD Player

1 Answer

Dont have radio code but have part no whitch is p05064385af


I need autoradio code for grand cherokee 1J8G2E8A53Y535388 . TCAAA0143J3562 - P05064385AF - MU9CY95H Alpine. Thanks

Feb 12, 2010 | Cherokee Jeep Grand 6 Disc In-Dash CD...

1 Answer

I need to remove clarion stereo form dash of peugeot 306 to find serial code for stereo


If you dont have the proper keys then you can still do it, if you have a small hole at either side then you need to place someting like a coat hanger in to them holes about 5cm deep then the radio will release. you may have the older style which you have to insert two flat pieces of metal along the bottom of the radio, if you look closely at the bottom of the radio you can see where it go's. otherwise call into your nearest peugot garage.

Nov 23, 2009 | Naxa Electronics Naxa Stereo AM/FM.MPX...

1 Answer

HALFORDS JUST CAHNGED MY CAR BATTERY AND NOW I AM


here is a link on how to reset your kenwood radio using a universal code from kenwood, it doesn't work everytime, but worth trying. you do need a kenwood remote though..good luck
http://www.ehow.com/how_5164864_reset-kenwood-cd-player-code.html

Aug 12, 2009 | Kenwood KDC-W4534 CD Player

2 Answers

CAR STEREO NOT WORKING


Hi
With the newer cars most radios have a theft deterrent device built into the radio, and if they steal your system it will not work in another jeep/car the dealer knows the unlock code, some charge to unlock the radio some don't.
That's why when doing electrical work on a car/truck etc. You have to have 12V DC power to the battery terminals all the time or you will loose the code and then only the dealer can help you unlock the radio.
HTH.
Zues

Dec 21, 2008 | Cherokee Jeep Grand - RBB AM/FM Stereo...

2 Answers

How to put the code in my cd radio


SELECT THE SECURITY DIGITS TO ENTER PRESS THE FM OR AM BUTTONS PRESS THE [[ ]] ARROW SEARCH BUTTONS TO MOVE ALONG AS YOU ENTER YOUR CODE WHEN CODE IS ENTERED PRESS AND HOLD ]] FORWARD SEARCH BUTTON FOR 3 SECONDS RE-ENTER MAY APPEAR REPEAT THE SAME AS ABOVE TO COMFIRM CODE IF NESSARY HOPE THIS HELPS YOU JAKE YOU CAN DOWN LOAD A MANUAL FREE I HAVE ENCLOSED MY MOBILE NO 07936635539

Jun 07, 2008 | Kenwood Car Audio Receivers

Not finding what you are looking for?
Cherokee Jeep Grand 6 Disc In-Dash CD Player w/Changer Controls Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cherokee Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

61292 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Cherokee Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...