Question about Homedics Sound Spa Classic Clock Radio

1 Answer

Projection clock no longer working

Had the clock for about 60 days, and the projection clock has suddenly stopped working. It is very faintly lit, and all the "pieces" of the numbers are lit at once (88:88). The front-facing clock is fine, as are the sound and radio functions. Tried turning clock off and then on again, no help.

Posted by on

  • 4 more comments 
  • chezza 02 Nov 07, 2007

    i have the exact same problem all the nimbers are lit up and the projection doesnt work. only difference is that the same time this happenend the alarm went off at 2.30am and was set for 5.00am and the time was an hour behind

  • sophiasandy Feb 03, 2008

    My projection stopped and turning it off for did not work.

  • Anonymous Jul 01, 2008

    I don't have this exact model, but very similar and my projection is bits and pieces and very faint too. Now the alarm is picking and choosing when it wants to go off also. This is not worth the mony I paid for it.

  • jnethyatt Feb 13, 2009

    I had same problem with projection on clock, after a lightening storm, I unpluged it from wall for 10 minutes and when turned back on it worked,

    thanks for your solution, IT WORKED.

  • Heidididy Mar 28, 2009

    Clock works fine, keeps time, and music/sounds play but the projection is all fuzzy, as if the lense needs to be cleaned somehow. Manual does not describe a specific way to clean it either.

  • Anonymous Mar 18, 2014

    try to reset the clock and can't get some of the functions to work



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Just solved my problem that was like yours. turn the clock off at the power for ten minutes and when you turn it back on it should work. mine did!

Posted on Nov 07, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a GE space saver microwave, JVM1653SH02, stopped working.

Sorry but at the price of repairs I would pitch .

Jan 19, 2015 | GE Kitchen Ranges

1 Answer

Hmdx eclipse alarm clock's alarm stopped ringing

There could be a number of reasons for this happening. Does the clock run only on batteries or batteries and electricity? It could be the age of the clock. The way the clock has been taken care of and the type of environment it is in for example too much dust. If the clock runs on batteries, have the batteries ever leaked and been left in the clock? Take very fine sandpaper and very gently sand the contacts of the clock where the batteries go, dust with a small dry paintbrush and use good quality batteries.

Feb 04, 2013 | Homedics HMDX Eclipse Alarm Clock - Black

1 Answer

Set time of day dial stopped working. the timer is less than a year old. no one touched the timer before it stopped working

1) Clock motor might be bad. Release thumb spring located inside box and tip out mechanism to read number printed on clock motor. Google search that Intermatic clock number for replacement.
2) Check circuit breaker and make sure circuit has 120Volts.
3) Contact Intermatic: They take care of their customers.

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Jan 15, 2011 | Intermatic R8806P101C -...

1 Answer

RCA P60921 60 in. Rear Projection not working

could be the flyback as some eat them depends on how old it is, and what model it is be more specific. also possible high voltage divider box

Nov 11, 2008 | RCA P60921 60" Rear Projection Television

2 Answers

Magnavox 60

which chip did you replace? and what is the model number of your set?

Aug 29, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Reset lamp clock

you need to reset lamp timer this is to tell set it now has new lamp i have the information at my shop as soon as i can , I will up date this with how to reset timer.

Dec 29, 2007 | Zenith D52WLCD 52" Rear Projection...

1 Answer

Projection display

To fix the projection display that is stuck with four 8's, hold down the hour and miute button at the same time. Keep the buttons pressed down while unplugging the power source then pluging it back it. I did this and the screen works like it did when I first got it.


Jan 11, 2007 | Homedics SS-4000 Clock Radio

Not finding what you are looking for?
Homedics Sound Spa Classic Clock Radio Logo

Related Topics:

1,892 people viewed this question

Ask a Question

Usually answered in minutes!

Top Homedics Audio Players & Recorders Experts

Gyula Lacz

Level 3 Expert

486 Answers

ray gallant

Level 3 Expert

57188 Answers

Tom Chichester

Level 3 Expert

49905 Answers

Are you a Homedics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides