Question about RCA 3-Device Universal Remote with Dedicated DVD Menu Key
I have a Emerson TV/DVD combo and i have been trying many codes to get this remote to connect with the tv/dvd combo but it just won't. Tried all 4 ways and all the codes i could find but no reply. I tried doing tv first and then later dvd part first but i have no clue. If someone has any help they can offer. Thanks
I have a similar problem with my universal remote and DVD player/recorder. there are some remotes that will not work with a different brand of unit, that is the best I can tell you.
Posted on Nov 19, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
0154, 0236, 0463, 0180, 0178,
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable
box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
Sep 26, 2011 | One For All URC-3021 Remote Control
Mar 22, 2011 | Philips Televison & Video
Jan 02, 2011 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo
Feb 13, 2009 | GE RM24912 Universal Remote Control
Feb 12, 2009 | RCA Universal Remote 3 Device Remote...
Mar 25, 2008 | RCA Universal Remote 3 Device Remote...
Jan 14, 2008 | Televison & Video
Nov 14, 2007 | One For All URC-3021 Remote Control
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: