I just had my DDX-6019 installed in my Expedition. The installer noticed the two screws at the left and right of the DVD slot are missing causing misalignment of the DVD w/ the casing. I don't want to strip the screw holes but I don't have anything to compare to get the right replacements. Can some send me the specs on the two screws to include the diameter, length and thread per inch so I can get the right ones?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it sound to me like you have a broken connection on yourvideo out jack on the main unit becouse you say the lead is fine and the tv screens work with another unit.this can be caused by the plug being pulled out in a wrong angle. ask an audio dealer to chech the solder connections in the unit to see if they are making a connection with the pcb(printed circuit board. hope this helps
haha ok shipping screw in a double din unit i have never seen before but in dual which is a big pos. but there should and will not ever be a screw that holds the laser in on a double din unit because the laserated in the very middle of the player on these models. sounds like you have a defective driver so i would try and get it exchanged or call kenwood