I was using default password (0000) for my camera last year and it worked fine. When I tried to use the camera this fall it would not accept the password and I cannot change the password. The camera is useless unless I can solve this password problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please go to Setup menu and select Initialize option to reset camera to default settings that might solve blurry picture problem, if that does not help then its technician job to adjust focus of camera. Thanks.
1. Close the camera.
2. Remove SD card.
3. Remove at least one battery.
4. Wait 10 seconds.
5. Put the battery to its place.
6. Insert a new SD card.
7. Open the camera.
8. Default password is "0000"
9. Enter "0000"
It should work now. If you want, you may change the password.
Try this: Trail Scout and Trail Sentry camera re-programming procedure. 1) Turn unit on and wait for screen to prompt password 2) Press the enter button and hold until camera switches into 5-digit password mode _ _ _ _ _. Trail sentry cameras will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH . 3) Press enter to confirm 5 digit mode (for trail scouts go to next procedure). 4) Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th 0ne is entered in the _ _ _ _ screen. 5) Camera will now go into operating mode, and user can now program a new password from the setup mode