Question about Computers & Internet

1 Answer

My screen dose not work i got batteries for it, put them in, and the screen show lines and numbers and the lines and numbers faded away.

Posted by on

  • 1 more comment 
  • kpscow22 Nov 14, 2008

    i think i droped it at lest a foot of the ground

  • Anonymous Apr 06, 2009

    EXACTLY the same problem. Dropped it too.

  • Sufal May 24, 2009

    the screen show lines and numbers and the lines and numbers faded away.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 29 Answers

Well , does ur pda ever fall? or get into water?

cause it might cause ur LCD screeen to be broken, but if ur pda ever got into water, ur component inside might be broken.

If one of above occured, u have to bring it to technician,unless you know how to replace a LCD or the other component.

if none of above occured, then u have a software problem, you need to flash it (put a fresh software in it), which you had to bring it to technician too, but it might cost much little than if you had problem on the LCD and component.

Posted on Nov 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove & replace screen on Xda orbit.


Hello,

I used a T6 Torx screwdriver, a piece of flat strong plastic (other people have suggested old credit cards), and a small flathead screwdriver (but not essential).

1) After taking the battery out I also removed the SIM card, the memory card, and the stylus
2) This picture shows the first screws to remove (circled in red), by using the torx
gif.gif Start.JPG ( 38.52K ) Number of downloads: 758

3) I then levered the hole the stylus fits into, by prising up with the end of the stylus (to remove the back cover)
gif.gif Stylus_clip.JPG ( 35.89K ) Number of downloads: 591

4) Using the plastic tool I slid it around the edge, being careful not to put to much force into it to remove the rest of the clips around the back cover.
This is a picture of the back cover off with the locations of the clips (note the camera hole for orientation)
gif.gif Backcover.JPG ( 37.45K ) Number of downloads: 546

5) I then removed the next set of screws (with the torx again)
gif.gif Backcover_off.JPG ( 62.24K ) Number of downloads: 626

6) I then removed the middle cover by prising against the front (the front was connected to the circuit), I found if it didn't want to release in one direction, then I would tackle it from the other way round
gif.gif Middle.JPG ( 43.59K ) Number of downloads: 675

7) Then to prise off the front cover was straight forward by using the flathead to lever the two clips in red
gif.gif Front_on.JPG ( 65.9K ) Number of downloads: 735

** The connector circled in yellow is for the front button set, and I didn't need to remove this to change the screen **
8) I then removed the flexi circuit connecting the screen (circled in blue) - I did tear mine, but that is fine for me as the screen was broken anyway, so if I was to do it again I would take more care
This shows the front cover with the clips circled
gif.gif Front_XDA_Orbit.jpg ( 42.61K ) Number of downloads: 526

9) The screen was held on with two strips of sticky tape, and I just used the flathead to prise it away

Connecting the new screen back was straight forward, as was putting the phone back together once I knew where the clips were. I did need to make sure the volume button was lined up with the connection on the circuit however.

If the links don't work go here

Hope it helped.

Nov 26, 2009 | O2 Xda Orbit Smartphone

4 Answers

JASJAM Fading screen & buttons


Hi,

Trying running a cardboard or the edge of a business card around the space between the screen and the screen cover.. a small piece of dust or particle stucke there could result in problem like that.

Feb 20, 2008 | Computers & Internet

1 Answer

Sharp wizard oz-290HII --fading screens


Friend, try to replace the battery. If it doesn't work try to press firmly the LCD connection interface underneath the screen because such unit has lossen connection.use T6 screwdriver to open the unit then slowly firmly press the LCD connector on the interface. Such thing will solve the problem. good luck

Jun 16, 2009 | Sharp Wizard OZ-290

4 Answers

My phone won't power up. It starts on the white


you have to do a master reboot onyour phone.the same thing happened to me. before u power up the phone hold the 2 white line buttons and then power the phone on without letting the buttons go.

Jun 09, 2009 | T-Mobile Dash Smartphone

1 Answer

I put the battery in it shows no battery symbol on the screen


Hold in Alt, delete in backspace in immediately after putting the battery back in until you get the hour glass.

Apr 11, 2009 | RIM BlackBerry Pearl 8100

1 Answer

Can't turn on and a battery sign with a red slush appears


Thee battery is fully discharged. It may take an hour on the charger before this goes away.

Mar 13, 2009 | RIM BlackBerry Pearl 8100

1 Answer

Palm Centro locked


If you forget the password, the only way to get back in is to perform a "hard reset." Performing a hard reset causes you to loose all data on your phone unfortunately (numbers, texts, and all). Hopefully you've sync-ed up your data on your computer recently.

To perform a hard reset, do the following:
1 - Remove the battery cover.
2 - Take out the battery.
3 - Put the battery back in. An orange Palm logo will appear on your screen.
4 - While the logo is showing, press & hold the Power/End button until a black status bar appears on the screen, fills completely, and then goes away. Then you can stop pressing the button.
5 - Next on your screen will be a prompt to erase all data. Press up to say Yes.
6 - Next select your language and you have an empty phone to start a new. If you've previously sync-ed up your data, you can sync up now and add it all back.

Good luck!

Oct 23, 2008 | Palm Treo 500 Centro

3 Answers

Battery wont charge,when plugged in phone lights up for 5 secs and screen fades Away


dear, your phone is charging but you are stuck in bootloader mode, you have to update your rom

Jul 23, 2007 | Orange SPV C500 Pocket PC

1 Answer

Spv c500 switches on for 2secs then screen fades away & when plugged direct to mains


I'm having the same problem Dan.What went wrong? hor did you solve it? I'm really desperate. Thanks Billy

Oct 08, 2006 | Orange SPV C500 Pocket PC

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98868 Answers

David Payne
David Payne

Level 3 Expert

14086 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...