Question about Hoover Nextra HNT 2135 Top Load Washer

1 Answer

Drum very noisey - Hoover Nextra HNT 2135 Top Load Washer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Same prob with mine. the pulley is cracked

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hoover 750 lc heavy duty macking noise whene spinning dry


Possible drum bearing. Check for any knocking by turning drum by hand whilst empty.

Sep 13, 2014 | Hoover Washing Machines

1 Answer

Noisey and seemingly loose drum, on moving large patch of rusty looking oil underneath washer coopersinpowys@btinternet.com


I would say its the dampers on the underside of the drum.
One or both have failed and need to be replaced.

Feb 05, 2011 | Hotpoint Aquarius WD640 Front Load...

1 Answer

The drum is very noisey and is leaking grease on items.


hello sorry to say that it sound like the bearing have gone you can do quick test open the door grab hold of the drum pull up and down if this moves freely then the bearing have gone

regards
shaun

May 28, 2010 | Washing Machines

2 Answers

Hotpoint aquarius WMF740 (1 year old) - noisey spin


its the drum bearings there worn out try opening the door and lifting the top of the drum with your fingers if there is any life and the drum drops back when you let it go its them bearings,, then spin the drum by hand is should grumble or growl,,,if it dont do any of this, it could be the "spider" broken off, its an ally part that holds the drum bearings and the drum up,

Mar 07, 2010 | Washing Machines

1 Answer

Noisey drum, can bearings be replaced on zanussi zwf 1421 w


Yes they can. Search for a service manual for instructions, on the net. Parts are not usually exspensive, Repairmen are. I did mine in less than an hour.
Andy

Nov 09, 2009 | Zanussi F1045W Front Load Washer

1 Answer

Noisey bearing on Hotpoint WM25 washing machine


Think the bearing is located in half drum in other words you need to fit half drum to fix/ parts about £55..+.2 hrs labour

Oct 31, 2009 | Washing Machines

1 Answer

Hotpoint wt960 ultima, very noisey when on spin


Remove lower rear panel of washer, remove belt and spin drum by hand, if it is noisy or feels rough, then main drum bearings have failed.
If no noise, then look elsewhere for prob..Could be noisy motor, or loose concrete balance wieght.
Please rate my solution.
Thanks.

Aug 27, 2009 | Washing Machines

1 Answer

Aquarius washer drum stuck


sounds as if the drum bearings have gave way was it noisey b4 this

Jun 06, 2009 | Hotpoint Aquarius WF220 Front Load Washer

1 Answer

Drum makes a lot of noise spinning and does not spin the water out of towels or blankets


Hi, What make of machine is it? You will probably find that it is the main wash drum bearings that are noisey. This will slow the drum down so the water will not come out so effectively.Replace and away you go........

Mar 07, 2009 | Washing Machines

1 Answer

Noisey washing machine


i had the same problem check the holes inside the drum for a bra wire stuck in one of them which was my problem we also thought the bearings had gone but they were not hope this helps

Oct 15, 2008 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Hoover Nextra HNT 2135 Top Load Washer Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...