Question about Home Satellite Radios

Open Question

Firmware i hav kaon stb ksc 260 mco model with CAS h/w 01.00 boot loader 2.1.6 plz. suggest me that from which web site i can download original firmware .

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I use a new MicroSD? Unit locks up when Checking Media


First of all, suggest using an SD card of 2GB or under. Second, firmware update. Here's the details: This is a common problem with SkyFi3 units. You have to press the Volume UP button and hold it while you press the POWER button; this will 'reboot' your radio, then you can try it again to get it to go off.
You will need to update your firmware on the radio using the baby USB cable and the unit plugged into your computer WITH the battery recharged FIRST. Also, go to the www. xmradio dot com website and download the SkyFi3 FIRMWARE update. Then you need to download the "firmware update" into your SkyFi3.
If this doesn't fix your lockup problem, you need to call DELPHI customer support, and they can tell you one more 'master reset' method. After the firmware update, it might take 2 or 3 'restarts'.

Again, press and hold the Volume UP and PWR at the same time to reset a 'locked-up' SkyFi3. Regards, John

Oct 01, 2010 | Delphi SKYFi3 XM Radio Receiver

2 Answers

XM Direct 2 firmware download


well that could be like the problem i am having. you need to do it on windows xp it will only work with windows xp

May 09, 2009 | XM Radio XM Direct 2 Mini-Tuner Car Kit...

1 Answer

Need owners manual for a uniden scanner model#r4030


Here is the web site from Uniden to download owners manuals from. Are you sure of the model number? 

http://www.uniden.com/index/manuals_results.cfm?cat=3

Dec 22, 2008 | Home Satellite Radios

1 Answer

Thomson digital receiver


hi i think you might have the wrong software on the box,turn you tv on and put it on the sky channel take your viewing card out of the stb turn the box off then take the power lead out, wait till the stb powers down then put your finger on the backup button keeping it pressed put the power lead back in and holding the backup button wait till the on screen message comes on your tv, wait till the tv screen goes blank then put your card back in turn your box back on and try to record 2 channels at the same time this should solve the problem. if not it will be the cable or the quad lnb.

Jul 22, 2008 | Home Satellite Radios

1 Answer

Garmin nuvi 200


Go to the gamin site and register. You will then need to download the driver for your model. After you register the web site should walk you through this. after you download the driver you may then update the software. One word of note, if you have the 2008 software than your up to date. Gamin updates there maps only once a year.

Mar 27, 2008 | Home Satellite Radios

1 Answer

Viewsat with boot message


I had the same problem some months ago, you must re-boot your viewsat using a null modem cable.

1.- firsth you need the factory bin and install it using the loader 2 (if you don´t know how to install the factory bin there are in the web a lot of web pages which show how to make this process)

2.- once you have installed the factory bin, you must install the last viewsat bin.

of this way i solved this problem i hope you can do it too

Mar 05, 2008 | Home Satellite Radios

7 Answers

Fta viewsat extreme dead.


Hi,
I am using viewsat extreme 2000. After downloading the new program PC-STB. Front panel power has gone. Only rear light on. All view has gone.
Would you please send me by email, how can I solve this problem? I shall be grateful if you please reply.
Thank you.
-Rajesh
rkb@295.ca

Dec 11, 2007 | Home Satellite Radios

5 Answers

Viewsat ultra reciever has no power/lights etc.


OK I did my research. Apparently there is a little chip inside the receiver that has burnt. We need to take our receiver the the people who know how to fix them and replace the chip with a new one. It might take time as from what I hear it could be any chip? Hope this helps

Dec 08, 2007 | Home Satellite Radios

2 Answers

Captain 7000


load Captain loader version 1.24 or 1.25 then when you download new file extract it to open then open loader and at the left on top click file open the extracted file turn on the captain unit and away you go it will start to download.

Nov 30, 2007 | Home Satellite Radios

Not finding what you are looking for?
Home Satellite Radios Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Satellite Radios Experts

John
John

Level 2 Expert

473 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Home Satellite Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...