Question about Nikon COOLPIX P5000 Digital Camera

1 Answer

Nikon coolpix P50 driver

Try to run at Windows 98 and unable to use due to no driver

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 225 Answers

Use a memory card and a generic USB card reader. That is the easiest route.

Posted on Nov 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My nikon coolpix p50 shows lens error all the time,how can i repair it myself?


A lens error can be caused by physical damage to the mechanism that controls the lens, or debris that is interfering with the operation of the lens.

This article may be able to help you with a "do it yourself" solution.
http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

In the event that your problem is due to physical damage and not just dirt or debris, you will need to take it to a local camera repair shop for troubleshooting-- though with most consumer digital cameras, labor and parts cost of a repair can easily exceed the value of the camera.

Mar 05, 2011 | Nikon Coolpix P50 Digital Camera

1 Answer

I have Nikon coolpix P50 does it support 8GB for SD card?


The manual only specifies cards up to 4GB in size. I suspect that Nikon, conservative as they are, only listed cards that existed at the time. If you can get access to an 8GB card, go ahead and try it.

You can download a PDF manual from http://support.nikontech.com/app/answers/detail/a_id/13948 and/or order a printed one from http://www.nikonmall.com/category/instructionmanuals

Jun 06, 2008 | Nikon COOLPIX L10 Digital Camera

2 Answers

Nikon Coolpix driver for Win98


Ugh. Nevermind. I knew as soon as I posted this, I'd figure it out! Since I've been seeing this same question floating around in search engines, might as well post it, I guess. Who knows, maybe save someone a headache.


- Install the Nikon drivers from the yellow disc labeled Picture Project:

Choose "custom installation", uncheck everything except the very top box labeled "driver." (Despite what Nikon's booklet says, Picture Project DOES NOT have to be installed to make the camera work). After they are installed, you will be prompted to restart your computer.

- After restart, hook the camera to the computer via the USB cable and turn the camera on. Windows will now detect a new device and launch the add new hardware wizard. Select "display a list of all drivers" and click next.

- Now check "show all hardware" at the bottom of the window, and select the category "hard disc controllers" from the left-hand menu.

5211513.jpg

- Scroll down this menu until you find "Nikon Corporation." Now in the right window you will see "Nikon Digital camera Controller." Click next.

fcc2ad9.jpg

- The drivers should install with no problems and no more work to do. Your camera is now compatible with Windows 98! If installed correctly, the window should look like this:

45603b8.jpg

- If you go to My Computer, there will be a new icon labeled "Removable Disc." Click on it, and you'll notice all your photos are stored here in a folder labeled NIKON100.

Notes:

I'm not sure, but this setup should work for the following Nikon models listed on the official site as well:

COOLPIX 2000 / 2100 / 2200 / 2500 / 3100 / 3200 / 3500 / 3700 / 4100 / 4200 / 4300 / 4500 / 4600 / 4800 / 5000 / 5200 / 5400 / 5600 / 5700 / 5900 / 775 / 7600 / 7900 / 8400 / 8700 / 8800 / 885 / 995 / L1 / L101 / L2 / L3 / L4 / L5 / L6 /L10 / L11 / L12 / L14/ L15 / P1 / P2 / P3 / P4 / P50 / P5000 / P5100 / S1 / S2 / S3 / S4 / S5 / S6 / S7c / S9 / S10 / S50 / S50c / S51 / S51c /S200 / S500 / S510/ S700 /SQD1 / D1H / D1X / D100 / D2H / D2Hs / D2X / D2Xs / D200 / D40 / D40x / D50 / D70 / D70s / D80


If you don't have the Picture Project disc, you can download the same drivers from the European website (the link in the above post). The correct driver for the Coolpix is located in Drivers > Clpx > EN > Setup.exe (for English setup).

Before attaching the camera, be sure it's set to Mass Storage.
(Menu > Set Up > Interface> USB) There should be a V-shaped checkmark next to the Mass Storage option.

Mar 06, 2008 | Nikon Coolpix L11 Digital Camera

1 Answer

Driver for 98


Go to this website to access the driver you want:
This is from the Nikon website and reliable.  It should work unless you have windows 98se and then you may need a different driver.
http://support.nikontech.com/cgi-bin/nikonusa.cfg/php/enduser/std_adp.php?p_faqid=170&p_created=1029871308&p_sid=1S772NTi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0xNCwxNCZwX3Byb2RzPTEsMjI2JnBfY2F0cz0xODUmcF9wdj0yLjIyNiZwX2N2PTEuMTg1JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTE*&p_li=&p_topview=1

Dec 21, 2007 | Nikon COOLPIX L3 Digital Camera

2 Answers

Driver needed for Nikon coolpix S200


You need the Win 98 USB driver- Google for that.

Dec 16, 2007 | Nikon COOLPIX S200 Digital Camera

1 Answer

Installing digital camera drivers from Nikon View 5 or 6 CD on Windows OS


This document assumes that your computer did not recognize your digital camera after you have installed Nikon View version 5 or version 6 (5/6) using "Easy Install" and then restarted your computer. Nikon View 5/6 compatibility: Windows 98 SE Windows ME Windows 2000 Windows XP Home Edition/Professional Note: Log on as Computer Administrator when installing drivers on Windows XP Home Edition/Professional or as Administrator when installing drivers on Windows 2000 Professional. Cameras that are not supported by Nikon View 5/6 Nikon View 5/6 does not support direct connection of COOLPIX 950, 910, 900, 800 or 700 digital cameras however it will support a Compact Flash card reader which contains images taken with these cameras. Before installation - Before installing Nikon device drivers, make sure the camera is disconnected from the computer. If the Device Wizard launches when you connect a camera, click Cancel to exit the Wizard. - You have turned off any virus-checking software that may be running. - You have exited all other applications. Procedure for driver installation First DISCONNECT THE CAMERA FROM THE COMPUTER and follow the instructions below. Insert the Nikon View CD into the CD-ROM drive, the Select Language dialog box appears. Select a language Select the language of your choice from the pull-down menu. After you select a language, click Next to display the Install Center window. Custom Install Step 1: Select the software to be installed. Select the programs you want to install from the list in the Custom Install tab. Step 2: Install the driver Choose the camera driver you wish to install and click Install. If you have chosen more than one program, the programs are installed in the order of display. - PTP Drivers Select this check box to install PTP drivers. This check box is only displayed if you are using Windows XP. - COOLPIX Camera Drivers (all models except 990 and 880) Select this check box to install the driver for COOLPIX series cameras (excluding 990/880). This check box only appears if you are using Windows 98 Second Edition. - Drivers for COOLPIX 990 and 880 Select this check box to install the drivers for the COOLPIX 990/880 - Drivers for D1 series cameras Select this check box to install the drivers for the D1/D1X/D1H cameras. Install PTP Driver (Windows XP only) Check that the camera is disconnected If you selected the PTP Driver, the installation of the driver will start. The Setup dialog box below is displayed, asking you to confirm that a camera is not connected to your computer. Make sure a camera is not connected, and click OK to begin installation. Windows 98 SE If you are using Windows 98 SE, drivers for all COOLPIX cameras (all models except 990 and 880) will be installed if selected. The dialog box shown right will be displayed. Click OK to continue. When you install the device driver, the dialog box shown below may be displaye

Aug 30, 2005 | Nikon Coolpix 3200 Digital Camera

1 Answer

Installing digital camera drivers from Nikon View 5 or 6 CD on Windows OS


This document assumes that your computer did not recognize your digital camera after you have installed Nikon View version 5 or version 6 (5/6) using "Easy Install" and then restarted your computer. Nikon View 5/6 compatibility: Windows 98 SE Windows ME Windows 2000 Windows XP Home Edition/Professional Note: Log on as Computer Administrator when installing drivers on Windows XP Home Edition/Professional or as Administrator when installing drivers on Windows 2000 Professional. Cameras that are not supported by Nikon View 5/6 Nikon View 5/6 does not support direct connection of COOLPIX 950, 910, 900, 800 or 700 digital cameras however it will support a Compact Flash card reader which contains images taken with these cameras. Before installation - Before installing Nikon device drivers, make sure the camera is disconnected from the computer. If the Device Wizard launches when you connect a camera, click Cancel to exit the Wizard. - You have turned off any virus-checking software that may be running. - You have exited all other applications. Procedure for driver installation First DISCONNECT THE CAMERA FROM THE COMPUTER and follow the instructions below. Insert the Nikon View CD into the CD-ROM drive, the Select Language dialog box appears. Select a language Select the language of your choice from the pull-down menu. After you select a language, click Next to display the Install Center window. Custom Install Step 1: Select the software to be installed. Select the programs you want to install from the list in the Custom Install tab. Step 2: Install the driver Choose the camera driver you wish to install and click Install. If you have chosen more than one program, the programs are installed in the order of display. - PTP Drivers Select this check box to install PTP drivers. This check box is only displayed if you are using Windows XP. - COOLPIX Camera Drivers (all models except 990 and 880) Select this check box to install the driver for COOLPIX series cameras (excluding 990/880). This check box only appears if you are using Windows 98 Second Edition. - Drivers for COOLPIX 990 and 880 Select this check box to install the drivers for the COOLPIX 990/880 - Drivers for D1 series cameras Select this check box to install the drivers for the D1/D1X/D1H cameras. Install PTP Driver (Windows XP only) Check that the camera is disconnected If you selected the PTP Driver, the installation of the driver will start. The Setup dialog box below is displayed, asking you to confirm that a camera is not connected to your computer. Make sure a camera is not connected, and click OK to begin installation. Windows 98 SE If you are using Windows 98 SE, drivers for all COOLPIX cameras (all models except 990 and 880) will be installed if selected. The dialog box shown right will be displayed. Click OK to continue. When you install the device driver, the dialog box shown below may be displaye

Aug 29, 2005 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Nikon COOLPIX  P5000 Digital Camera Logo

Related Topics:

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Digital Cameras Experts

kakima

Level 3 Expert

96467 Answers

Steve

Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Nikon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...