Question about PC Desktops

2 Answers

I have a Floppy Drive Titanium Edition, not sure where I purchased it now, but not 1 year old. I have a Vista & it will not weork on this computer. Now however it did work one time when I first got it. I need to coppy 10 boxes of Floppies onto CD's. Help!!!!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 36 Answers

IDK your financial situation but a new one was only about $15-20 for a mid priced when I last bought one. I haven't had a lot of luck with them in the last few years. They seem to work for a short time then only seem to read disk. And a lot of times that is difficult too. I wonder if anyone has ever tried an external FDD? Maybe these would work better but I'd ask someone who has tried one first!

Posted on Nov 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 246 Answers

Best thing is try a another floopy driver to replace the old one

Normaly floopy disk drivers are damage mostly

Posted on Nov 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the floppy disc on my acer SA80 - Z970


I doubt you have one. Computer manufacturers have not been installing floppy disks for some years now.

Jul 07, 2011 | PC Desktops

3 Answers

I have the gateway zx190 all in one. Everything was great until a week ago. The screen went black I rebooted the screen came back for just a few seconds then went black again. I purchased a new video card...


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive
Test the leads that attach to your ((hard drive from the motherboard)) or replace all the leads that attach to your hard drive including electrical extensions + IDE,SATA and the ones that attach from your ((motherboard to hard drive))
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they are probably old and faulty a computer needs its connections to have an end so any faulty leads will end up with a computer error


hope this helps

Jan 13, 2011 | Gateway One ZX190 PC Desktop

1 Answer

Black screen of death how do you fix it?


?Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to fail to detect a hard drive continue on a cycle or to shutdown

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your motherboard to your hard drive make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

problems

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty ?

heres a tip

then click start run type cmd then type chkdsk/r/f which will scan for and attempt to fix any bad sectors automatically fix any corrupt files on your hard drive then defragment your hard drive you have to keep a computer very clean & free of dust and give it regular maintanance

?

hope this helps

Dec 04, 2010 | PC Desktops

1 Answer

Pc turns on no boot no keyboard lights no monitor and no vista boot disc


Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to fail to detect a hard drive continue on a cycle or to shutdown

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your motherboard to your hard drive make sure they have a secure connection and are not faulty or just replace them there probably old and faulty
problems
make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty ?
hope this helps

Dec 04, 2010 | PC Desktops

2 Answers

My computer crashed and it wont read a cd to run drivers on it


Try using the startup disc if you have one in drive a: & include cd rom at startup, I think it's choice # 2

Nov 02, 2010 | PC Desktops

1 Answer

My Dell 531S will not boot past the BIOS (Dell logo) screen. At first I thought it was the hard drive, since it wasn't recognizing anything connected to SATA port 1. Since then I have purchased a new...


It seems like you have multiple problems:

1. DVD-ROM drive not accessing the disk

2. unable to "disable" the "floppy" drive in BIOS SETUP

3. not recognizing anything connected to SATA1 port

It's time to take your computer to a qualified technician, for professional trouble-shooting.

Is your DELL computer still under warranty? If so, exercise the warranty.

Or, maybe you should just remove the "new" disk-drive, the RAM, the DVD-drive, and then responsibly "recycle" the old computer, and purchase a brand-new system, repurposing the disk/RAM/DVD components.

Sep 01, 2010 | Dell Inspiron 531s Desktop Computer

1 Answer

I cannot install ethernet driver of hp compaq d530. Where can i find it?


Hello: I hope the following information is helpful.
If you are trying to install the driver for the Broadcom ethernet NIC that was pre-installed (NOT an ethernet card that you purchased and installed yourself), there is a softpack (updated driver installation) download available from HP/Compaq. It will install the driver automatically for you, just download it from the link below and run the ".exe" file.
IMPORTANT: Check to be sure that your current Operating System, and model of the network device you are trying to install, are BOTH listed below BEFORE you download!
This is a software / driver update for the HP Compaq d530 ultra-slim desktop: All Models
Supported network devices:
BCM5906M Broadcom 10/100/1000 5782 based NIC Broadcom 570x 10/100 Integrated controller Broadcom NetXtreme Gigabit Ethernet 5782 Broadcom NetXtreme Gigabit Ethernet PCI-Express NetXtreme(tm) 10/100/1000 Gb NIC
Supported Operating Systems: Microsoft Windows 2000 Microsoft Windows 98 Microsoft Windows NT 4.0 Microsoft Windows Vista Business 32 Edition Microsoft Windows Vista Business 64 Edition Microsoft Windows Vista Enterprise 32 Edition Microsoft Windows Vista Enterprise 64 Edition Microsoft Windows Vista Home Basic 32 Edition Microsoft Windows Vista Home Basic 64 Edition Microsoft Windows Vista Home Premium 32 Edition Microsoft Windows Vista Home Premium 64 Edition Microsoft Windows Vista Starter 32 Edition Microsoft Windows Vista Ultimate 32 Edition Microsoft Windows Vista Ultimate 64 Edition Microsoft Windows XP Home Edition Microsoft Windows XP Professional Microsoft Windows XP Professional x64 EditionINSTALLATION INSTRUCTIONS: 1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved). 2. Double-click the downloaded file and follow the on-screen instructions.LINK where file can be downloaded:HP/Compaq Support-Broadcom Driver download
Again, I hope this information is what you neededto install your network device. Should this not answer your question, please come back, provide more details of your problem, and we will be happy to help!Best of luck to you!

Jun 23, 2010 | HP Compaq d530 Ultra Slim PC Desktop

1 Answer

Running Windows XP Home Edition Error code


The diags code was a failed response from the floppy drive. Most system didn't ship with one.

Boot to the XP CD, go to recovery console, run bootcfg /rebuild

http://support.microsoft.com/kb/330184

May 18, 2010 | Dell Dimension 8400 PC Desktop

1 Answer

Transferring data from old computer to new computer


If its connected to the internet email the files to yourself and then save to your new computer. If its not online, you could try taking out the hard drive, make it a slave in your new computer and moving the data from one drive to the other then take it out and good to go.

Jul 16, 2009 | PC Desktops

2 Answers

I have an Accer Extensa 5220 laptop which came with vista Home Edition. I wanted to down grade the OS to windows XP Pro. After formating the Hard Drive, I ran windows XP setup disk but keeps on giving the...


The problem of your laptop is the hard disk type. because acer 5220 laptop is using a SATA hardisk that automatic detected or supported by Vista. But in the windows Xp you need to download the sata driver for windows xp and save it to the floppy drive. In the beginning of windows installation press F6 to install another device or scsi the windows setup search your floppy drive for the sata driver and install it automatically. If you have cannot fix it just contact me i'm willing to help you

Apr 15, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...