Question about Panasonic PT-47WX49 47" Rear Projection Television

1 Answer

Convergence problem and cropped picture

Out of the blue our convergence got out of alignment on our PANASONIC PT-47WXC43 projection tv ( approx 5 years old ) we tried to adjust convergence as per manual, and improved but not totally fixed problem still have blurry picture, and reduced picture size with wide bars on left and right sides of picture this only occurs when watching tv signal and not when viewing a dvd dvd is full screen, but has same blurry picture

if anyone can help us with this, please contact us thankyou

posted 11/12/08

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 125 Answers

Your tv is under convergence problem usually we need to replace 2 big integrated circuits in the convergence section, at this point you may need a good tech to come over to your home

Posted on Nov 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Panasonic PT-47WX53, this morning when i went to turn the TV on the picture was not align. The red and blue look aligned but not the green, i opened the back and when I coved the green light the...


This kind of problem occurs due to failure of convergence output chips located on main circuit board of tv and replacement of convergence output chips will hopefully solve your tv problem.
Soldering work is involve to replace these two chips so have local tv repairman for that job if you are not familiar doing so.
Thanks.

Jun 29, 2011 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

I have a Panasonic Multimedia Projection HDTV when tv is turned on it has red & blue color spots & red verticle lines showing on the screen what could be causing this to be happening


Tv have a problems known as a convergence problems,it dead.The tv have colors lines R,G,B mis alignments,have shadows colors pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all it resistors are dead too.These parts on the convergence board,must be replaced to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 20, 2010 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

The blue lense is off by 2 inches and can't adjust it. The picture has a blue shadow.


The tv have a problem known as a convergence problems,it dead.Any colors lines R,G,B mis alignment,have 3D pictures or colors shadows.The tv convergence board it dead.Require changing 2 STK convergence ICS and some or all it resistors to solved convergence problems.The shop,will cost u $300-350 for parts and labors.

Sep 08, 2010 | Panasonic PT-47WXD63 47 in. Rear...

1 Answer

I have a 7 year old Panasonic HDTV. Picture quality has been great until today. As an example, the banner at the bottom of the picture is visible but it is also displaying in an arch mode above the...


Tv any colors mis alignment.The tv convergence board parts are dead.The convergence board require changing the 2 STK convergence ICS and some or all it resistors,this parts must change to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jul 27, 2010 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

My 10 year old tv goes off after about 5 minutes and the blue


Any colors mis alignments R,G,B.The tv have a problems known as convergence problems,it dead.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts,must be replaced in the tv convergence board to solved the convergence problems.The shop will cost u $300-350 for parts and labors.

Jul 17, 2010 | Panasonic PT-56WXF95 56" Rear Projection...

1 Answer

Convergence and distortion problem.


This sounds like convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. Shops usually $200-$400 Be sure to vote/rate me if this helped Thanks!
See link for more detail
http://www.ehow.com/how_4575598_yourself-projection-tv-repair-convergence.html

Oct 31, 2009 | Panasonic PT-47WXC43 47" Rear Projection...

1 Answer

Please, can anyone tell me which STK39x-xxx convergence ic's are used in a Panasonic, rear projection TV, model PT-47WXC43


Your STK numbers are on the ones in your TV Big black ICs STK if they are 110s,120s,150s Use the 180s instead.better ICs For EXample STK392-110 ect.....

Feb 20, 2009 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Panasonic Rear Projection TV PT-47WXC43


I have a Panasonic PT-47WXC43 47 in Rear Projection. It went off, on picture, no sound. 

Jul 13, 2008 | Panasonic PT-47WXC43 47" Rear Projection...

2 Answers

Panasonic Rear Projection


You are on the right track. The problem is actually with the green convergence IC that controls the alignment. The convergence ic's take the information from the 3 pictures and align them into one picture on the back of your screen. Although this is an economical repair it is complicated and should be left to a quailfied service technician. If you are not sure of a local technician, panasonic's website has a servicer locator that can guide you to one. Hope this helps

Mar 31, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

No Picture


I would start with the convergence ic's
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Jan 16, 2008 | Panasonic PT-47WXC43 47" Rear Projection...

Not finding what you are looking for?
Panasonic PT-47WX49 47" Rear Projection Television Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68202 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...