Question about Projection Televisions

Open Question

ADvent adv25 dvd player in my SUV will not power on. Help?

Posted by on

  • Anonymous Nov 25, 2008

    my Advent DVD player - ADV25 will not power on

  • babs_fleming Jan 16, 2009

    My adv25 will not power up also. Did anyone help you figure out what was wrong with your DVD player?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does this model have the capability to handle a blueray dvd playe


Yes,u can hook up a normal DVD player in this tv before right?A Blu-Ray DVD player not much difference,just a better form of a DVD player.

May 22, 2010 | Projection Televisions

2 Answers

TV is plugged into a power bar. Before I went on vacation, I turned off the power bar. On restarting, I cannot get my devices to play - no picture. Also cannot set the TV to channel 3. I have...


you'll have to rescan or run the auto-program feature in the tv main menu, and if you still have the original remote transmitter you can select video1 or vid2 depending on which input is being used for the dvd player and the dvd recorder.

Jan 19, 2010 | Proscan Projection Televisions

1 Answer

How do I change my remote for TV to Input Video 1?


There should be a button on your remote denoting "Input." If you connect the DVD player to the TV on "video input 1" then push the input button on the remote or TV itself until the DVD appears on your TV (which will be Video 1). Some TVs must have the component (in your case) the "DVD" player connected to the TV before the TV will recognize it. Make sure the DVD is powered up and then push the input button until the DVD player appears on the TV. Depending on your TV inputs, there may be multiple inputs like, Video, Component, DVI, or HDMI. The above are listed in the respective order of "quality." HDMI being the best. Whatever input you hook the DVD player up to on the TV will be the "input" you will look for when pressing the input button. Hope this helps.

Oct 26, 2009 | Mitsubishi WS-48515 48" Rear Projection...

1 Answer

I have a Mitsubishi VS-45605 projection TV and a Philips DVD player model DVP3962/37. Can anyone help me figure out how to program the remote to control the DVD player? I only have the original remote for...


I've got the same tv and...I've still got the manual!;-)

Programming the Remote to control other audio and video products:
  1. Move the slide switch at the top of the remote to select the a/v product you want to control (in this case, DVD).
  2. Press and hold the Power button so that it stays down when you enter the code.
  3. Enter the code for the equipment. Release the Power button
  4. Point the remote at the equipment and press the Power button. If the equipment respondes, you're done. If not, and you have more codes that apply to that equipment, go back the step 2 and try the next number.
If none of the numbers work, I'm afraid you might be out of luck.

Oct 20, 2009 | Mitsubishi VS-45605 50" Rear Projection...

1 Answer

TV won't work after storm


ok lets try this hit the power button on the DVD player some go into stand by mode and when power is interrupted you have to push the button manually also reset the surge protector next get a lamp that you know works and unplug the tv and plug the lamp into the socket where the TV was plugged into turn on the lamp, does it turn on? yes then something wrong with TV again may have been in stand by mode plug back in and try pushing the power switch on make sure the TV if it has a remote is on the right im put to get a picture say like a satellite or cable or DVD player. hope this helps.

May 29, 2009 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

Help I got my DVD stuck in the DVD slot on my Ensignia TV with side DVD slot....


you may have to take the back of the tv off to get to the dvd player and get it loose...when u take the back off power the tv up in dvd mode and jiggle the tray for the dvd to see if it will come lose and release the dvd.

Jan 24, 2009 | Projection Televisions

1 Answer

I have a advent tv and i want to program a comcast remote to it and i cant find the code


I have an Advent TV with no booklet and no code. I would like to program my Comcast remote. Can you help me?

thanx.

MMG

Dec 03, 2008 | Projection Televisions

1 Answer

I accidentally reversed the 12 volt polarity on my Colby combo TV DVD player,...not it wont work. Can I repair this or does it need professional help


check first your power supply or source if no output voltage..if no voltage it is damaged try a new power supply...
second if the power supply is good the problem is in your player maybe thier is a damage or burn capacitor or transistor to be replace

Apr 28, 2008 | Projection Televisions

1 Answer

TV Remote will not work


I was told that there is a short in the power supply, which needs to be built back up. The estimate for repair is $450. Is this reasonable? Thanks.

Hank

Feb 28, 2007 | Mitsubishi WD-52725 52". Rear Projection...

Not finding what you are looking for?

Open Questions:

Projection Televisions Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...