An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has written 7 tips or uploaded 3 video tips
Re: bravetti 8l deep fryer f1100h
Either there is insulation missing or misplaced is my first thought. Then if that's not it how is it vented and if there is a leak on the "Hot Gas" from the combustion (assuming you have gas not electric and if electric believe Id be looking at the wiring for bad connections creating excessive heat or wrong type wire not approved for high heat installation).
If this helps you please rate me as high as you can thank you you for using fixya.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I also have the 4320 and my problem was a reset button on the back, down in a hole.
My reset button is red. Also there is a safety swith on the rear where you slide the control
unit into the grooves, it has to be all the way down for it to work.
Reset button on rear in a hole or the control unit has to be in the grooves on the rear of the fryer and pushed all the way down. there is a safety switch in the groove on the control unit.
Hope that works.
Fryers draw high amps.Goto home depot,lowes and buy a 15amp 125 volt plug.Cut the exsisting plug off the cord,strip the cord down 2 inches you will see 3 wires black,white,green, connect the green wire to the green screw on the plug.connect the other 2 wires on either of the remaining spades(it doesnt matter).let me know