Question about Zebra Stripe S600 Thermal Label Printer

1 Answer

Zebra S600 Tear position adjustment won't stay put

When I follow the instructions to adjust the "media rest" position everything appears to work well. However, when I print the next label it reverts back to the same spot, before adjusting the position

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 164 Answers

To be sure we're talking about the same thing, you pressed MODE twice, then used UP and DOWN to align it, right?

Have you checked your Printer Preferences and Printer Defaults? Could be a label size setting somewhere. Preferences follow the Windows user, Defaults follow the print device.

Try to restore factory settings if all else fails. I have to do this quite often. Best to start with a clean slate.

Here's the manual if you need it:
http://tinyurl.com/yb2rpd4
Hope this helps! If so, please leave a rating!

Posted on Mar 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zebra 90XiII - sometimes when adjusting the tear off position using the arrow keys. The printer (motor) doesn't move the label media in/out. When it does actually move the label media to the desired...


Print a configuration label and see if it is in the correct mode - tear off mode. If it is in rewind or peel off, then the label is not suppose to come out to the cut bar, but stop under the print head and not backup.
If you want it to align with the cut bar make sure that the driver is set for tear off with backup enabled. The printer driver in the software will override the printer setting and change it as soon as you send a print job.

Dec 02, 2010 | Zebra 90XI II Printer

2 Answers

Zebra S600 Printing


You have to program the tearoff.
See the manual or use a windows driver to end the value to your printer

Aug 24, 2009 | Office Equipment & Supplies

1 Answer

Zebra S600 will not do anything???


Emma, I can assist but this is slightly technical. The issue more than likely is the print head sensor flag is out of position. If you have the print head all the way down & purple toggle in the locked position but the print head light still flashed then more than likely it is the flag that came loose. To correct it means you have to remove the left side cover where the logic board is. Make sure to remove power cord & all communication cables & connectors prior to cover removal for your safety. After the cover is removed you will see the logic board. On the upper right corner area will be a SCREW with a black "L" shaped piece of plastic, this is the flag. At this point make sure the print head is down & locked. Place the flag in the horizontal position, which should be between the sensor positions, While holding retighten the screw. Once tight open & close the print head to see the flag move up & down between the sensors. Place the cover back on but put 1 screw in only so you can test. If all works put the rest of the screws in & continue to work. If not then update this & I will get back with you.

Feb 09, 2009 | Zebra Stripe S600 Thermal Label Printer

1 Answer

Zebra 105se label length is wrong


But physically measuring the label 1252? You can also disable the calibration options and then use the command ^XA^ LL1252^XZ. Also try to download the latest firmware for your printer.

Jan 27, 2009 | Zebra 105Se Thermal Printer

1 Answer

After cutting the label the printer pulls media back about 1/2''


you can adjust the tear off position.
check if need the backfeed and what setting, if you need, you be able to stop doing that (no back feed) but can change the print on the lable.

Nov 20, 2008 | Zebra 105SL Thermal Label Printer

2 Answers

Zebra S600 Thermal Ribbon Ripping after printing


Hi chunnon,

What darkness setting are you using? If the darkness is at or near 30, you may be burning through the ribbon.

Try defaulting the printer and running a Pause test. Does the ribbon tear during the Pause test?

Sep 23, 2008 | Zebra Stripe S600 Thermal Label Printer

1 Answer

Labels print out of position


Try cleaning the media and ribbon sensor you can open it and try clean it, it possible that there's a lot of dust or even small particles at the sensor path..

Jun 05, 2008 | Zebra Stripe S600 Thermal Label Printer

2 Answers

Zebra S600 printer continues calibrating


The factory default settings for the S600 is to auto calibrate every time the printhead is closed and every time the power is cycled. If the media sensor is not positioned correctly for the media you are using the label size will not be detected during a calibration. You mentioned the media has no markings, doe sthe media have a space between the labels? If so, the media sensor may not see the gap in the labels adn therefor is not calibrating properly or not calibrating at all. Check the media sensor position. I have found that the media sensor must be at least 1" from the inner wall of the printer so it doesn't see the edge of the backing in oder to read the size of the labels.

Jan 28, 2008 | Zebra Stripe S600 Thermal Label Printer

Not finding what you are looking for?
Zebra Stripe S600 Thermal Label Printer Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment & Supplies Experts

pkwc

Level 2 Expert

254 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...