- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Location : The A1M southbound between junctions J56 and J53 . Lane Closures : Lanes 1 and 2 will be closed. Reason : Roadworks are planned. Status : Pending. Schedule : Expect disruption everyday between 20:00 and 06:00 from 13 December 2017 to 16 December 2017. Lanes Closed : There will be two of three ...
Location : The A1M southbound between junctions J51 and J49 . Lane Closures : Lanes 1, 2 and 3 will be closed. Reason : Emergency barrier repairs are planned. Status : Pending. Schedule : Expect disruption everyday between 20:00 and 06:00 from 11 December 2017 to 13 December 2017. Schedule : Expect disruption ...
Progress report · Background · Impact · Media & documents
This is the latest roadworks information for England's strategic road network. For information on other roads in England please visit your Local Authority. Trunk roads and motorways in Scotland are the responsibility of Transport Scotland; those in Wales of the Welsh Government. You can find more details about traffic ...
Jump to Roadworks - A1 northbound exit for M25/A1(M) ' Northbound ' Road Works. Location : The A1 northbound exit slip to the M25 . Reason : Emergency barrier repairs are planned. Status : Pending. Schedule : Expect disruption everyday between 22:00 and 05:00 from 13 December 2017 to 15 December 2017.
This depends on what the devices are doing with VLAN tagging. In the switch settings you will want to add VLAN2 and make sure you set it to Fixed on the ports you want to allow VLAN2 to work on. VLAN1 is already configured for all ports. If your devices are tagging the VLAN2 traffic but not the VLAN1 traffic you don't need to do anything. By default any incoming non-tagged traffic will be set to VLAN1. This is because the PVID is set to 1 by default. If you need the incoming traffic to be tagged with VLAN2 changed the ports PVID to 2.
The router's PPTP passthrough and IPSec settings assume that you're connecting to an external VPN server on the public side of the network, but it sounds like you're hosting your VPN server inside your local network. If this is the case, you may just want to have your windows VPN box in a DMZ, or get a router that you can exert more control over. Be wary, if you're doing this at a residential location, your internet provider will probably block or "shape" this type of incoming traffic to your local network.
Did you already forward port 1723? I guess you have done that. To isolate it, try to bypass the router and setup or establish the VPN session there. If it doesn't work, maybe your ISP doesn't allow port 1723 or it's just the modem.
The problem would be comcast. Your connections are setup correctly. The modems do not control the internet traffic flow, they are made to produce maximum flow. If more people use the internet, the less flow it will have. Check all internet options settings, and make sure EVERTHING is set to automatic
You need to login to your router and go to firewall or virtual servers. In there you can setup port forwarding. The goal is to forward external (internet) traffic to a specific internal machine (your PS3). You do this on a per TCP/UDP port basis and must specify the appropriate external TCP and/or UDP port and internal TCP and/or UDP port. Sounds harder than it is.
Or you can setup your PS3 in your router's DMZ (Demiliterized Zone). This sets up the router to forward ALL internet sourced traffic to a specific machine (your PS3). This is the easier way to do it so you don't have to worry about specific TCP/UDP port numbers.
- General Tab
---- Rule Description: Allow ICMP Type 3,4
---- Action: Allow this traffic
---- Advanced Settings: All network interface cards
---- Screensaver Mode: Both on and off
---- Record this traffic in "Packet Log" [OPTIONAL]