Question about Kenmore 15864/15862 Top Load Washer

1 Answer

Kenmore 90 series washer will only spin with a couple of pieces of clothing in it, when I add more wet clothing it will not spin. If I take some cloths out it will then spin. When washer spins the water is draining fine, but only can get it to spin with a couple of pieces of clothing in it.

Posted by on

  • 1 more comment 
  • capone01 Jan 06, 2010

    Our Kenmore 15864/15862 Top Load Washer, wont spin on the spin cycle. We replaced the 'Coupler", and still nothing. What should we try next?

  • Anonymous Mar 17, 2014

    wash and drain they both spin together at the same time

  • Anonymous Mar 17, 2014

    the unit washes and drains and together spins all together at the same time

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 121 Answers

Hi!

looks like you have a defective motor or a leaked load capacitor .....you need to get the motor rewired....or get a new motor for your washer..... have the capacitor checked....

but ya the issue is 1 of the 2....faulty cap/motor

Cheers!


Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KENMORE 90 SERIES TOP LOAD WASHER WONT SPIN LOUD NOISE, SOUNDS MOTOR RELATED. WILL DRAIN SLOWLY CLOTHES ARE STILL WET AT END OF CYCLE.


does it agitate???. if it does not then you need the motor coupling. you need to remove the cabinet, yes, I said the cabinet, remove the pump,motor and you got to the coupling. replace all part in kit. reassemble and test. go to the website of sears parts WITH THE COMPLETE MODEL. and get the part. model starts like 110.xxxxxxxxxxx

good luck to you.

Feb 07, 2011 | Kenmore 15864/15862 Top Load Washer

2 Answers

Kenmore 90 Series Heavy Duty Washer - Agitator doesnt spin


THIS IS A TYPICLE PROBLEM . BETWEEN THE MOTOR & THE TRANSMISSION THERE IS A COLLECTOR ASSEMBY (THREE PIECE
SET) REAL EASY TO GET TOO EASY TO FIX . ALSO COST EFFICENT

Sep 21, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Wet clothes


the reason the clothes are wet is the washer is not shifting to high spin,does the washer have a speed switch(normal wash spin,high wash spin)if its not the speed switch than the clutch is bad,how old is the washer?mike

Apr 19, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 90 Series Washer


CHANGE THE LID SWITCH

Apr 18, 2009 | Washing Machines

1 Answer

Kenmore 90 Series: Clothes very wet after spin cycle


I do not have this kind of washer, but I had same problem with my washer and I found the drain trap was full not allowing washer to completely drain. Hope this helps, Good Luck!

Feb 13, 2009 | Kenmore 23822 Top Load Washer

1 Answer

Kenmore series 90 washer spins but the clothes are still very wet


you probably need a new clutch (Whirlpool Washer Clutch Kit 285785 fits kenmore too) , or your gear case is shot.

Feb 13, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 90 series washer will get stuck in between cycles


Sounds like the timer has failed. It's a common problem.

Part number 8545379, $83.69 from SearsPartsDirect.com

Feb 04, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore washer 90 series Washer will not spin


  • Check that the water supply valves are turned on
  • Inspect the filter screens
  • Test for overheating
  • Inspect the water pump
  • Test the water inlet valve.
  • Test the motor

Dec 11, 2008 | Kenmore 24032\24036 Top Load Washer

8 Answers

Kenmore 70 Series Washer


i have a kenmore 70 series washer model 10020722990
it will fill with water but will not wash. if you put it on spin the water will drain but it will not spin. it sounds like the motor turning. is it a clutch that has broken.

Sep 05, 2006 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 15864/15862 Top Load Washer Logo

1,619 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...