Question about D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B)

1 Answer

Cannot install D-Link router

I have a d-lInk router DSL-G624T. I can obtain wireless internet on one of my lap tops but not another . I have tried to install it on my second lap top. It can find the router, says it is connected but I cannot access the internet. When i type in http;//192.168.1.1 as asked i get the password/admin box. I type in admin for both, which the instructions say but it will not accept them. I do not have an installation disc. The lap top works perfectely at a friends house picking up their connection no problem (bt hub). I would appreciatate any advice.

Posted by on

  • 2 more comments 
  • julieorpen Nov 13, 2008

    Hi

    I can get onto http;/192.168.1.1 and then I get the box for username and password. I have tried every word posible for both but it wont accept any. The default setting is admin, admin buit it just wont accept it. Is there anywhere that i can download the set up tp put onto a disc and try it that way. As I said earlier it conneccts no problem to my bt hub in my own house and i havn;t installed any software for that at all.

    with thew D-Link it says connected but does let me use the internet although last night I was able to for 5 mins then it just went back off CONFUSED!

  • terreb Mar 14, 2009

    i'm having problems with the dlink wbr-1310. on the internet set up section, i get as far as the page that asks you to clone the MAC address and enter the host name, i can't go any further. i press 'next' and nothing happens. please help. i've been at this for THREE DAYS.

  • Anonymous Mar 24, 2009

    smae thing get error message 302

  • Cyweb May 11, 2010

    Hello, sounds as if you can connect to the router over the default IP - 192.168.1.1. That usually means you have obtained an IP address from a DHCP device - usually the router. Next thing to try is looking at your DNS settings on the Network adapter. Do you have a manual DNS server IP configured on the laptop that doesn't connect to the internet? Can you ping any www.name.com address? Let me know.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers

You may try typing admin on the username field. Just leave the password field empty.

Once you're in the setup page, click on WIRELESS tab which on the left side of the page. On the Wireless page, you will see the wireless settings set in the router. You may also enable the wireless security on that page if there is not security enabled yet.

Please check this for your reference http://support.dlink.com/Emulators/di524/h_wireless.html

Hope this helps!

Posted on Nov 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am trying to access the internet wirelessly from a lap top through a D-Link DI-624 I went throught the steps 1. plugged up the router 2. unplugged the DSL box 3. plugged up the ethernet cable to the DSl...


Unplug the power cables from both your DSL modem and D-Link router.
Verify the Ethernet cable is plugged into both your DSL modem and the D-Link router.
Plug the DSL modem power cable back in and wait for the self-test to finish.
Plug the D-Link router power cable back in and wait for the self-test to finish.
Plug your laptop into the D-Link router using an Ethernet cable.
Can you access the D-Link configuration page now?

Check to see if your computer is getting an IP address from the D-Link router.
Here's how to do that, assuming you're using Windows.
Hold down the Windows key on your keyboard then press the letter R.
In the Run dialog box type 'cmd' (without the apostrophes).
Click OK.
In the command prompt window type 'ipconfig /all' (without the apostrophes).
Press Enter.
Look for the line that reads 'Ethernet adapter Local Area Connection'.
Verify that 'Dhcp Enabled' is set to 'Yes".
What is the IP address?thejustin.jpg

Mar 14, 2011 | Routers

2 Answers

Not providing valid IP addresses


make sure that your router is acting like a DHCP server.
also make sure that your pc's ip is set to "obtain automatically" under local area connection->properties->internet protocol->properties

Jan 25, 2010 | D-Link DSL-G624M (0790069285783) Wireless...

1 Answer

Need help...


The wireless router's wireless settings need to be configured eg. SSID, encryption etc. and then the wireless card in the laptop needs to be configured with the router's wireless setting so it can connect to the wireless router.
Please click in this link for details on how to secure your wireless network and follow my instruction :-
http://www.fixya.com/support/r3559128-wireless_router_security

Jan 22, 2010 | Arris SURFboard SBG900 Wireless Router...

1 Answer

Pleasssssssssse help : on router G624T


What is the Operating system on the laptop ?
If it is XP then in the bottom right hand corner you will find Wireless network connection ( looks like 1 computer monitor). Use that icon to connect to the wireless network.
If it is windows Vista, then in the bottom right hand corner you will find 2 computer monitor icon. Use that icon to connect to the wireless network.
If it is Windows 98/ME/2000 then use the adapter utility to connect to the wireless network.
For MAC you will see the AIRPORT icon at the top.

Check the wireless settings of the router first . Make sure that yopu have all the wireless settings of the router. If you are not sure about the settings, then open the router set up and check the settings.

Click Here for step by step instructions on how to connect to the wireless network and troubleshooting steps

Jan 11, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Need drivers for DSL-G624t wireless router


If you're connecting to the router by ethernet cable or wirelessly, you dont need drivers unless you mean the drivers for the ethernet adapter and/or wireless adpater in your PC.
If this is what you're after, your PC's manufacturer's website is the best place to look if you dont have them on CD/DVD.

If you're connecting to the router by USB port, then the D-Link webiste should have the drivers for downloading.

Sep 13, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

D-link DGL-4500 is not accessing my dsl modem


make sure the dsl modem is in bridge mode. you do this by connecting directly to the modem then accessing modem configuration page. after doing this connect the way everything was before. now go to router admin page, then setup tab at the top, then choose internet, manual setup. in the place where its says my internet connection is select PPPoE. then put in your dsl username, password and etc. save settings. this should fix the problem

Apr 20, 2009 | D-Link DGL-4500 Wireless Router

1 Answer

Cannot connect lap top or printer wireless and also connect to the internet via AT&T motorola modem


yes. Here is Linksys' page on how to:

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3687

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 12, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Cannot install D-Link router


1. check your wireless adapter TCP/IP settings if its set into "Obtain as IP address Automatically".
2. if the settings is set as Automatic and your not getting IP address then select "Use the following IP Address"
3. use IP address followed to your router address like if192.168.0.1 in router type 192.168.0.2 or192.168.0.3 just check the next address IP in your network.
4. after typing subnet IP will automatically set
5. type the router IP address as your default gateway
6. click OK to save your new settings

Hope this will help

Nov 24, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

2 Answers

New lap top


Open a web browser and type http://192.168.0.1 in the address bar.
Enter admin for the username and no password to get into setup.
Setup your account.

Apr 22, 2008 | D-Link DI 514 Wireless Router (DI-514)

Not finding what you are looking for?
D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B) Logo

619 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...