Question about Stanley Heavy Duty Stapler, Cast Aluminum Housing for Greater D...

Open Question

Stanley TRE 550 Sharpshooter stapler

Stapler will not work...Does not seem to be getting electricity...Does it have a fuse that could have blown??? I cannot find the manual for it..

Posted by on

6 Suggested Answers

brainyass
  • 242 Answers

SOURCE: Stanley TR70 Manual Stapler won't accept Arrow 1/4" staples

It sounds like you have a light duty stapler and are trying to use heavy duty staples. 1/4" refers to the length of the legs not the thickness of the actual staple. You probably just need light duty staples.

Posted on Oct 23, 2008

rowdy45176
  • 2176 Answers

SOURCE: Disassembled the stapler now need diagram to reassemble

Found user manual online but no parts breakdown, I have a phone number at 1-800-343-9329 and they might be to email you the breakdown. Wish I had better info but this is all they furnish online.

Posted on Mar 15, 2009

  • 1 Answer

SOURCE: B310HDS Stanley Bostitch stapler rod to lock stapes has plastic t

I have the same problem and have found no answers from Stanley Bostitch customer service. They redirect to a telephone number that does not answer.
Solution: Don't buy Stanley Bostitch.

Posted on Feb 02, 2010

mkh5094
  • 145 Answers

SOURCE: i want to know where i can buy a stanley Tre500 electric stapler

They will have what your looking for at your local Sears or Lowe's. If you go to www.bing.com you can type Electric Stanley Tre500 Staple Gun into the search bar and it will bring up some links for you where you can buy the product online.

Posted on Jun 04, 2010

heatman101
  • 43501 Answers

SOURCE: Stanley Electric HD Sharpshooter TRE

Hi,
That is a common problem with those guns...have returned quite few of them that did not last more then a few hundred staples...my local hardware returned them got credit for them and gave me new ones...they are a poor excuse for a staple gun but there is not much of an alternative to them...

heatman101

Posted on Aug 13, 2010

puertobori
  • 7725 Answers

SOURCE: I have been unable to

Go to this link.

Posted on Nov 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I load the stapler?


No you don't. We answer most things here.

If the stapler is like any of these

http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3Abostitch%20staple%20gun

You push the back in slightly to unlatch it and then drop it down a bit and the staple pusher comes out completely.

Jan 28, 2016 | Heavy Duty Stanley Bostich Heavy-duty...

1 Answer

HOW TO LOAD BRADS IN STANLEY TRE500


Please download the instruction sheet from the following link which explains how to load the brads. Make sure you have the correct size of brads mentioned at the bottom of the instruction sheet.

TRE500 Sharpshooter Stapler Instruction Manual

Aug 13, 2014 | Electric Stanley Tre500 Staple Gun /...

1 Answer

I have a Stanley Heavy duty stapler Model# TR250 and for the life of me I cant load the staples. Please help!


Most staplers load from the rear, but not the TR250 Sharpshooter.

With the stapler upside down and the sliding rail out drop a whole strip of staples in the channel upside down (points up) and then push the slider back in making sure it locks.

Aug 03, 2011 | Stanley Hvy Duty Staplenail Gun Tr250h

1 Answer

I can not get the staples to go all the way into plywood


Try using both hands on the stapler. One on the handle with the other forcing down with your palm directly in line with the direction of the exiting staple. Some times this will allow the staple penetrate better. Make sure the stapler is square and firm on the work surface. Good luck!

Mar 05, 2011 | Stanley Proto Stanley TR150HL SharpShooter...

1 Answer

Size of staple to install roll insulation in wall cavities.


It would seem that 9/16 is a bit long to attach canvas and may even penetrate through to the working surface unless the backer board is much thicker then 9/16.

1/4 or 3/8 may be more suitable.

Good luck
Aduz

Mar 22, 2009 | Electric Stanley Tre500 Staple Gun /...

1 Answer

Installing nail brad in a stapler


I have the same problem and the silly thing is I have used it. Ridiculous that you can't find a manual on it. Well, I have solved it!!!!

our problem is we open the stapler and stare straight down into the cavity. But if you angle it, you can see that there are grooves along the side which the head of the brads would hang and slide along.

1. on one side of the stapler it will say "load brad this side"
2. open the chamber and place the stapler on its side with the aforementioned side down
3 place your strand of brads in the appropriate groove and close the chamber
4 start shooting

pklew52@gmail.com

Dec 22, 2008 | Electric Stanley Tre500 Staple Gun /...

Not finding what you are looking for?
Stanley Heavy Duty Stapler, Cast Aluminum Housing for Greater D... Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Stanley Staple Guns Experts

John Trevino

Level 3 Expert

1378 Answers

yoopertech

Level 2 Expert

121 Answers

Christopher
Christopher

Level 1 Expert

28 Answers

Are you a Stanley Staple Gun Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...