Question about Nextel i730

1 Answer

I ordered a call tone and they charged me for it but I nener got

I ordered a call tone they charged me for it bit I nener got it, no one will help, everybody keeps telling me the same thing

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Hey, Andre, Now the main issue is, most i730 are not available for call tones, it's normally Sprint phones, that offer that service, unfortunately you wont be able to get any adjustments for not knowing, but here's a heads up....don't do it, Unless you call into customer care, to ensure your phone is supported by call tones, now ring tones is a different story, basically about 95% of Nextel phones are compatible for that service, but if you have Sprint Or Nextel phones, you will have to call into care, or if you are registered on Sprint.com, You can add a "feature" to your phone that will allow the call tone. Personally I have had a lot of issues with call tones on the nextel side, so honestly, if you want a call tone....go get a sprint phone :)

Posted on Jan 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the order that you charge me around $100 and a bit more


You are asking in the wrong place. You need to ask the company that is making the charges rather than a general answering site like Fixya. OK?

Feb 08, 2015 | Computers & Internet

1 Answer

How do i order a drill bit for skill 2336 02 3.6v 120 mini drill/driver


Ordering a 'bit' for your drill is not something you'd probably do. Ordering a 'chuck' however is perhaps what you mean?, i.e. the piece that actually rotates in the drill, holding whatever bit or accessory you're using.
This can be harder to find than you'd think, but maybe start by the internet, checking for the specs of the drill, then once you find the size, I'd go through eBay as hardware stores will generally charge you a fortune for these things.
Here's a decent site that may help:
http://www.jacobschuck.com/technical-information

Good luck

Jan 07, 2015 | Drills

1 Answer

I have been charged delivery when its free delivery. Why?


Fixya cannot help you with this, you have to contact the retailer you bought from.

Dec 13, 2014 | Vacuums

2 Answers

My charger for my tablet is not chargin it has to be bend in to charge


You either need to replace the carger or the bit that you plug the charger into.

Sep 11, 2014 | Tablets & eReaders

1 Answer

Different tones for incoming calls


I hope this helps.
You have the general tone for all incoming calls In order to assign tones you need to create your address book where you can assign the differnt tones.

Cheers!!!

Sep 04, 2014 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

Panasonic KX-TG2722 no dial tone


"No dial tone" certainly needs a bit more information. Technology requires doing the most simple aspects first then on to the complex. For starters, did you try a different phone line? Is the phone service turned on? Is the unit plugged into the wall and fully charged? More info required for your request.

Aug 27, 2014 | Uniden Cordless Phone

1 Answer

Reddish tone randomly


The issue is due to bad caps not holding the charge enough. Open the LCD and look for bad caps and replace as necessary. The fix should not exceed 20 bucks in parts. Make sure you allocate at least 1.5 hrs and a large clean table to open your lcd.

Mar 24, 2014 | Dell UltraSharp 2007FP (Black) 20.1 inch...

1 Answer

We purchasedn 3 bpr 40 and we justed ordered another, when we turn the bpr on to the channel of the 3 others that are in use, we just get a low continual tone, i tried a radio check on channel 1 with no...


Your new radio is likely not programmed the same as the others. A continual tone indicates a channel which is not programmed (doesn't have a frequency installed).

The other thing which can cause a tone, is a low or uncharged battery. You might try switching one of the known good batteries to the new radio to see if it will work. If you still have the same continual tone with a known good battery installed, you have a programming issue. If the battery swap solves the problem, then you need to investigate why your battery isn't charged up.

Either way, contact the dealer where you purchased the BPR40, they should provide programming free, or a warranty replacement battery for free. If you ordered online or by mail, and you just received the radio within the week, you should request they provide return shipping for you.

Best regards.

Sep 14, 2011 | Motorola Mag One BPR40 Two Way Radio

1 Answer

IRobot Roomba Dirt Dog sounds weak and stops


Generally the unit will beep or play the "uh-oh" tone or do something. I wish I could tell you what's going on with this Dirt Dog, but it's not communicating the problem. The best thing to do would be to give us a call when you have the robot with you. That will enable us to do any necessary troubleshooting as well as set up any orders that might be necessary. We're here M-F, 9a-7p, and Saturdays 9-6, EST. 1-877-855-8593 Look forward to hearing from you!

Aug 25, 2009 | iRobot 1100 Dirt Dog Bagless Robotic...

1 Answer

Line 2 will not ring if on line 1


It's still a bit hard to solve, but a typical RCA Visys system has programming options for each line. Here's a manual for one of the family http://www.rca4business.com/products/pc/viewPrd.asp?idcategory=17&idproduct=17

On page 15 you set the ringing tone and OFF is an option. On page 18 under Call Alert Tone, there are specific instructions for setting up each line to ring. It has to be programmed for each line in order to work. If you typically answer the phone on a specific set, I would make sure that line 2 is programmed to ring on some of the other sets. Also, you might want to make sure that you have more than one phone ringing on both lines just for this case.

I hope this helps.

Carl




Nov 24, 2008 | Lands Phones

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nextel Cell Phones Experts

Trisha
Trisha

Level 2 Expert

173 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Aaron Venable

Level 1 Expert

33 Answers

Are you a Nextel Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...