Question about K-Tec Champ HP3 Work Top Blender

1 Answer

Can't find their website & I Need Service for Washer Replacement

My Champ has been great for about 4 1/2 years but it needs a new washer in the plastic container. The black one is coming off in bits and going into my drinks. I cannot locate the K-Tec website nor any place that fixes these blenders. I don't want to give it to just anybody. My Champ is very noisy too but I don't worry about noise for a brief period of time. I don't recall if it was less noisy before. I'd just like to be able to take it to who K-Tec recommends. Does anyone know where to find them? How is it that when I google K-Tec blenders, Blendtec pops up first and some raw foods lady is second? Third is some place selling K-Tec blenders but not K-Tec itself. How many pages do I have to go through to find K-Tec's website I wonder.

Posted by on

  • Anonymous Apr 20, 2009

    I have the same problem likes yours, hope someone can give us a help. I start wondering who is real manufacturer.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

A little late, but Blendtec and K-tec are one and the same. Their jars will work.

Posted on Jul 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I get a new gasket for a GNC on the go blender


Contact GNC directly to inquire about replacement parts for your blender.

Sep 08, 2014 | GNC On-The-Go Blender - Black

2 Answers

Shaft appears to be stripping out


they dont provide phone service but still i will try to get some info

Aug 15, 2008 | K-Tec Champ HP3 Work Top Blender

1 Answer

I need a replacement rubber washer for my Braun blender; I think it's model Type 4184. Help, small thing, where can I get it? I'm in Kingston, ON Canada


Available parts for yourBraun 4184 blender can be found HH11&frmTyp=subgrp">here.

If the part you seek is not available suggest you contact their nearest service centre. You may search for the nearest service centre by inserting your postal code on this page.

Apr 02, 2012 | Braun Blenders

1 Answer

I need a replacement washer for Waring 1 L blender. The washer sits between the outer lip of blade unit and bottom rim of jug. Outer diameter 75 mm, inner diameter 55 mm. Can you help? Thanks, Denise...


Try taking the washer to a local hardware store, They should be able to find a replacement. (Normally the smaller stores have a better selection of the single washers than the big box stores) Also there's a company called MSC that has just about every washer imaginable, however you'll pay more for shipping than what its worth.

Feb 07, 2011 | Waring Blenders

1 Answer

K-Tec Champ HP-3 Burning Smell and Light Smoke


That burning smell is kind of a death sentence. At least a switch or more likely coils are burnt out.

Mar 27, 2010 | K-Tec Champ HP3 Work Top Blender

2 Answers

There is a leak in the caraffe(or jar). It is at


Common issue with all of these carafe's. Once the jar starts to leak the bearings are shot and it is time to replace the jar. The bearings are non-replacable. Bad design in my opinion. I was able to get my last jar (I have been through 3 before the 5 year warranty went out) to last by hand washing and not putting it in the dishwasher, but after 4 years of use on this jar it failed too.

Nov 29, 2009 | Blendtec Extra Carafe / Jar for the Total...

1 Answer

Suddenly my blender is VERY LOUD!


Had this happen twice before. The bearings in the blade area are going. We figured that in our dishwasher the heated water pools on the top by the bearings and as it cools water is brought in contact with the bearings and they rust. We have used penetrating oil to put a pool of oil around the bearing shaft and store it like that. Still noisy but cheaper than buying the replacement. Hand wash the blender to avoid this happening to your new one if and when you replace it.

Jul 23, 2008 | K-Tec Champ HP3 Work Top Blender

1 Answer

The blender coupling on my oster snapped in half. I have the replacement part already I just cannot figure out how to get the broken coupling off the base of the motor. I also got a replacement square...


10-01-2009 Sara - see solution for rlaymon 1-9-08 "Top part of base broke off" by TanyaCS on 1-20-08 - good ideas. I just fixed mine - 2 hour job + half hour to put a new cord in. Like TanyaCS my broken coupling was rusted to shaft - used WD-40 twice and let sit - meanwhile took out motor and removed fan - kept screws and washers in order on workbench (kitchen counter) - the fan hole is "D" shaped - fan end of shaft also "D" shaped - I filed a "flat" on the other side of the factory "flat" (side of 'D' that is straight) - Used big pliers on broken coupling and adjustable wrench on on the "flats" on fan end of the shaft. Broken end came right off. New cord is 18 gauge extension cord capable of at least 6 amps. Cut off the un-needed end. Or order a replacement cord $4 when you order the rubber drive coupling $4, pin with slinger washer $3. Bet you also need new rubber feet - didn't buy for mine - wish I had. Bert

Jul 11, 2008 | Oster 465 Work Top Blender

Not finding what you are looking for?
K-Tec Champ HP3 Work Top Blender Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top K-Tec Blenders Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

eyecam

Level 2 Expert

86 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a K-Tec Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...