Question about Panasonic RR-930 Desktop Cassette Transcriber / Recorder

1 Answer

Spindles will not turn

PAnasonic microcassette transcriber

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,992 Answers

There is a rubber drive belt that needs to be replaced, Panasonic part RDV101YA. This place says they have them:

http://www.partstore.com/Model/Matsushita/Panasonic/RR930.aspx?ModelAliasNumber=rr-930

I've never had to work on one of these so I can't say exactly what you might have to remove to get to the old belt and pulleys it rides on. But it's usually not too bad of a job to change a belt.

Posted on Dec 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The volume comes on loud even when i have turned it down before turning off


It sounds as if the UP VOLUME button/switch is broken and ON all the time. See if it is stuck down
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Aug 09, 2016 | Dual Audio Players & Recorders

1 Answer

How do I increase the volume on my record and cd player


Feed the sound into a really loud p.a. system. You can use a high quality Mic to get the best sound.

Jan 11, 2015 | Audio Players & Recorders

1 Answer

MY PANASONIC 5CD STEREO SKIPS WHILE PLAYING CD'S I HAVE USED A HEAD CLEANER AND IT STILL DIDN'T WORK.I HATE TO DISCARD IT.


The laser pick-up unit fault [weak]. You have to replace it with a new one of similar number. Contact any service technician. To replace this part, you have to take out the whole mechanism from the system; and this is a skilled work.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. Electro help

Dec 26, 2014 | Audio Players & Recorders

1 Answer

I what do I do if my gorilla MP3 turns on then back off


Try charging the battery the battery might be bad

Dec 25, 2014 | Audio Players & Recorders

1 Answer

I have a Toshiba Satellite A665-S6088. The last time I used it was last night and everything worked fine. It works with Windows 8.1, it has for a few months now, never had any problems until now. No...


Unplug the unit from ac power. Remove the battery. Wait a minute. Press and hold down the power button for 30 seconds. (Yes, I know, nothing will happen visible). Replace battery. Plug unit back in. Now try the power button and see if the unit resets. Sometimes this helps when all else fails especially with a computer which has "hung up" like yours. Let me know if this worked!

Aug 26, 2014 | Audio Players & Recorders

1 Answer

It wont turn on, it shows 'push power protect' when you turn it on, or disconnect it and reconnect, i already attempted to disconnect the Sony Stereo MCH-EC909iP Mini Hi-Fi and it shows 'Push Power, P


The only thing I can think of is its goin into protection mode like an amplifier would, you maxed the volume out and it's protecting your speakers or you don't have the right voltage going to it, I can see you don't have it on a straight 120v plug and you might have the wiring wrong on the speakers to it might be too low of a ohm or too high

Nov 22, 2012 | Audio Players & Recorders

1 Answer

I have a 1970's Panasonic Flip Clock Radio. (Model RC6530) The radio works just fine, but the flp clock stopped flipping. There is power going to the unit. I can also hear a low hum from the flip...


It looks like your problem might be an easy fix, at least. If the gear train between the motor and clock got stripped, you'd be in a bit more trouble. If the motor just isn't spinning, remove it from the side of the clock housing. There are 2 screws (or nuts) holding it in place. When you get it off, the cover for the motor will also be off. Apply some 3 in 1 oil, or perhaps just a tiny bit of penetrating oil, and give it a spin. From what I've read, it should do just fine. A lot of people use wd40, but I understand that can gum up over time.

This is a "at your own risk" type of repair, but as long as you unplug it before dismantling the radio, I think you'll be fine.

Feb 10, 2012 | Audio Players & Recorders

Not finding what you are looking for?
Panasonic RR-930 Desktop Cassette Transcriber / Recorder Logo

543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

kakima

Level 3 Expert

98868 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...